Ds kv8113 wme1 инструкция

The screen size of the Hikvision DS-KV8113-WME1 is — «.

Yes, the manual of the Hikvision DS-KV8113-WME1 is available in English .

Самостоятельное получение заказа в пункте выдачи. Дата и время получения заранее согласуется с менеджером магазина.
Отгрузка товара юридическим лицам осуществляется только при наличии печати или правильно оформленной и заполненной доверенности, наличии паспорта получателя.

Курьерская доставка по Москве

Мы предоставляем официальную гарантию на всю продукцию.

Сервис расширенной гарантии включает в себя:

• Page 1
  Video Intercom Villa Door Station User Manual…
• Page 2
  ● Products described in this Document, which may include licenses obtained from third parties. Any part of the Document, including text, pictures, graphics, etc., belongs to Hikvision. No part ● of this Document may be excerpted, copied, translated, or modified in whole or in part by any means without written permission.
• Page 3
  Video Intercom Villa Door Station User Manual PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS. YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET PROVIDES FOR INHERENT SECURITY ● RISKS, AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS INFECTION, OR OTHER INTERNET SECURITY RISKS;…
• Page 4
  Video Intercom Villa Door Station User Manual Symbol Conventions The symbols that may be found in this document are defined as follows. Symbol Description Indicates a hazardous situation which, if not avoided, will or could Danger result in death or serious injury. Indicates a potentially hazardous situation which, if not avoided, could Caution result in equipment damage, data loss, performance degradation, or…
• Page 5
  Video Intercom Villa Door Station User Manual Safety Instruction Warning All the electronic operation should be strictly compliance with the electrical safety regulations, ● fire prevention regulations and other related regulations in your local region. Please use the power adapter, which is provided by normal company. The power consumption ●…
• Page 6
  Video Intercom Villa Door Station User Manual Improper use or replacement of the battery may result in hazard of explosion. Replace with the ● same or equivalent type only. Dispose of used batteries according to the instructions provided by the battery manufacturer. Input voltage should meet both the SELV and the Limited Power Source according to 60950-1 ●…
• Page 7
  Video Intercom Villa Door Station User Manual Regulatory Information FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
• Page 8
  Video Intercom Villa Door Station User Manual EU Conformity Statement This product and — if applicable — the supplied accessories too are marked with «CE» and comply therefore with the applicable harmonized European standards listed under the EMC Directive 2014/30/EU, the RoHS Directive 2011/65/EU 2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union.
• Page 9
  Video Intercom Villa Door Station User Manual rayonnée équivalente (p.i.r.e.) ne dépasse pas l’intensité nécessaire à l’établissement d’une communication satisfaisante. This equipment should be installed and operated with a minimum distance 20cm between the radiator and your body. Cet équipement doit être installé et utilisé à une distance minimale de 20 cm entre le radiateur et votre corps.
• Page 10
  Video Intercom Villa Door Station User Manual About this Manual Get the manual and related software from or the official website (http://www.hikvision.com). Product Model Wireless Description Villa Door Station DS-KV8113-WME1(C) 2.4 G Wi-Fi + 13.56 MHz DS-KV8213-WME1(C) 2.4 G Wi-Fi + 13.56 MHz DS-KV8413-WME1(C) 2.4 G Wi-Fi + 13.56 MHz…
• Page 11
  Video Intercom Villa Door Station User Manual Contents Chapter 1 Appearance …………………… 1 Chapter 2 Terminal and Wiring Description …………….. 8 2.1 Terminal Description ………………….8 2.2 Wiring Description ……………………. 9 2.2.1 Door Lock Wiring ………………….9 2.2.2 Door Contact Wiring ………………..10 2.2.3 Exit Button Wiring …………………..
• Page 12
  Video Intercom Villa Door Station User Manual 6.1 Login Web Browser ………………….29 6.2 Forget Password ……………………29 6.3 Overview ……………………..29 6.4 Person Management ………………….31 6.5 Search Event ……………………32 6.6 Device Management ………………….33 6.7 Configuration ……………………34 6.7.1 View Device Information via PC Web …………….
• Page 13
  Video Intercom Villa Door Station User Manual 7.1 Device Management ………………….62 7.1.1 Add Online Device ………………….. 62 7.1.2 Add Device by IP Address ……………….. 64 7.1.3 Add Device by IP Segment ………………64 7.2 Live View via Door Station ………………..64 7.3 Organization Management ………………..
• Page 14
  Video Intercom Villa Door Station User Manual Chapter 1 Appearance…
• Page 15
  Video Intercom Villa Door Station User Manual Single-Button Villa Door Station Figure 1-1 Single-Button Villa Door Station Appearance…
• Page 16
  Video Intercom Villa Door Station User Manual Table 1-1 Description Description Microphone Indicator Unlock (Green)/ Call (Orange)/ Communicate (White) Camera Loudspeaker Button Card Reading Area IR Light TF Card Slot (Reserved) & Debugging Port Terminals…
• Page 17
  Video Intercom Villa Door Station User Manual Two-Button Villa Door Station Figure 1-2 Two-Button Villa Door Station Appearance…
• Page 18
  Video Intercom Villa Door Station User Manual Table 1-2 Description Description Microphone Indicator Unlock (Green)/ Call (Orange)/ Communicate (White) Camera Loudspeaker Button Card Reading Area IR Light TF Card Slot (Reserved) & Debugging Port Terminals…
• Page 19
  Video Intercom Villa Door Station User Manual Four-Button Villa Door Station Figure 1-3 Four-Button Villa Door Station Appearance…
• Page 20
  Video Intercom Villa Door Station User Manual Table 1-3 Description Description Microphone Indicator Unlock (Green)/ Call (Orange)/ Communicate (White) Camera Loudspeaker Button Card Reading Area IR Light TF Card Slot (Reserved) & Debugging Port Terminals…
• Page 21
  Video Intercom Villa Door Station User Manual Chapter 2 Terminal and Wiring Description 2.1 Terminal Description Figure 2-1 Terminal Description Table 2-1 Description of Terminal and Interfaces Name Interface Description DOOR Door Lock Relay Output 2 (NC) COM2 Common Interface Door Lock Relay Output 2 (NO) Grounding Door Lock Relay Output 1 (NO)
• Page 22
  Video Intercom Villa Door Station User Manual Name Interface Description Note Before accessing to the Exit Button, select Input as Exit Button in I/O Settings page first. RS-485 485+ RS-485 Communication Interface 485- Power Input 12 VDC 12 VDC Input Network Network Interface 2.2 Wiring Description…
• Page 23
  Video Intercom Villa Door Station User Manual 2.2.2 Door Contact Wiring Figure 2-3 Door Contact Wiring Note If the door contact is not used, the corresponding input interface needs to be grounded. Otherwise the door light will stay open.
• Page 24
  Video Intercom Villa Door Station User Manual 2.2.3 Exit Button Wiring Figure 2-4 Exit Button Wiring…
• Page 25
  Video Intercom Villa Door Station User Manual 2.2.4 Alarm Input Device Wiring Figure 2-5 Alarm Input Device Wiring…
• Page 26
  Video Intercom Villa Door Station User Manual Chapter 3 Installation Note Make sure the device in the package is in good condition and all the assembly parts are included. ● Make sure your power supply matches your door station. ● Make sure all the related equipment is power-off during the installation.
• Page 27
  Video Intercom Villa Door Station User Manual 3.2 Surface Mounting with Protective Shield Before You Start Tools that you need to prepare for installation: Drill (ø2.846) and gradienter. ● Purchase the protective shield before installation. ● Steps 1. Stick the mounting template on the wall. Drill screw holes according to the mounting template. Remove the template from the wall.
• Page 28
  Video Intercom Villa Door Station User Manual Figure 3-2 Mounting Template 2. Align the protective shield with mounting template. 3. Secure the mounting plate on the wall with 4 supplied screws according to the screw holes. 4. Secure the device on the mounting plate with 4 supplied set screws. 5.
• Page 29
  Video Intercom Villa Door Station User Manual Figure 3-3 Surface Mounting with Protective Shield 3.3 Surface Mounting without Protective Shield Before You Start Tools that you need to prepare for installation: Drill (ø2.846) and gradienter. Steps 1. Stick the mounting template on the wall. Drill screw holes according to the mounting template. Remove the template from the wall.
• Page 30
  Video Intercom Villa Door Station User Manual Figure 3-4 Mounting Template 2. Secure the mounting plate on the wall with 4 supplied screws according to the screw holes. 3. Secure the device on the mounting plate with 4 supplied set screws. 4.
• Page 31
  Video Intercom Villa Door Station User Manual Figure 3-5 Surface Mounting without Protective Shield 3.4 Flush Mounting with Protective Shield Before You Start Tools that you need to prepare for installation: Drill (ø2.846) and gradienter. ● Purchase the protective shield before installation. ●…
• Page 32
  Video Intercom Villa Door Station User Manual Figure 3-6 Mounting Template Note The suggested size of hole is 175 mm × 84 mm × 19 mm. 2. Install the gang box into the hole with 4 screws.
• Page 33
  Video Intercom Villa Door Station User Manual 3. Align the protective shield with the gang box. 4. Insert the device to the gang box. Secure the device with 4 supplied screws. 5. Fix the cover onto the device with the screw. Figure 3-7 Flush Mounting with Protective Shield 3.5 Flush Mounting without Protective Shield Before You Start…
• Page 34
  Video Intercom Villa Door Station User Manual Figure 3-8 Mounting Template Note The suggested size of hole is 175 mm × 84 mm × 19 mm. 2. Secure the gang box into the hole with 4 screws.
• Page 35
  Video Intercom Villa Door Station User Manual 3. Insert the device to the gang box. Secure the device with 4 supplied screws. 4. Fix the cover onto the device with the screw. Figure 3-9 Flush Mounting without Protective Shield…
• Page 36
  Get the SADP software from the supplied disk or the official website http:// ● www.hikvision.com/en/ , and install the SADP according to the prompts. The device and the PC that runs the SADP tool should be within the same subnet.
• Page 37
  Video Intercom Villa Door Station User Manual Status of the device becomes Active after successful activation. 5. Modify IP address of the device. 1) Select the device. 2) Change the device IP address to the same subnet as your computer by either modifying the IP address manually or checking Enable DHCP.
• Page 38
  Video Intercom Villa Door Station User Manual Default IP Address: 192.0.0.65. ● Default Port No.: 8000. ● Default User Name: admin. ● Steps 1. Run the client software, click Maintenance and Management → Device Management → Device to enter the page. 2.
• Page 39
  Video Intercom Villa Door Station User Manual Chapter 5 Quick Operation via Web Browser 5.1 Select Language You can select a language for the device system. Click in the top right of the web page to enter the Device Language Settings page. You can select a language for the device system from the drop-down list.
• Page 40
  Video Intercom Villa Door Station User Manual Figure 5-1 Privacy Settings Upload Picture When Auth. Upload the pictures when authenticating to the platform automatically. Click Next to save the settings and go to the next parameters. Or click Skip to skip privacy settings. 5.4 Administrator Settings Steps 1.
• Page 41
  Video Intercom Villa Door Station User Manual Community No. Set the device community No. Building No. Set the device building No. Unit No. Set the device unit No. Floor No. Set the device installed floor No. Door Station No. Set the device installed door station No. Note The main door station No.
• Page 42
  Answer the security questions. E-mail Verification 1. Export the QR code and send it to pw_recovery@hikvision.com as attachment. 2. You will receive a verification code within 5 minutes in your reserved email. 3. Enter the verification code into the verification code field to verify your identification.
• Page 43
  Video Intercom Villa Door Station User Manual Figure 6-1 Overview Page Function Descriptions: Door Status Click to view the device live view. Set the volume when starting live view. Note If you adjust the volume when starting two-way audio, you may hear a repeated sounds. You can capture image when starting live view.
• Page 44
  Video Intercom Villa Door Station User Manual You can view the event Employee ID, Name, Card No., Event Type, Time, and Operation. You can also click View More to enter the search conditions, including the event type, employee ID, the name, the card No., the time, the unit.
• Page 45
  Video Intercom Villa Door Station User Manual Note Up to 5 cards can be added. Generate PIN Click Person → +Add to enter the Add Person page. You can click Auto Generate to get a random pin. Figure 6-2 PIN Click Add to add the person.
• Page 46
  Video Intercom Villa Door Station User Manual Figure 6-3 Search Event Enter the search conditions, including the event type, the employee ID, the name, the card No., the start time, and the end time, and click Search. The results will be displayed on the right panel. 6.6 Device Management You can manage the linked device on the page.
• Page 47
  Video Intercom Villa Door Station User Manual Synchronize Click Synchronize, enable synchronize and click OK to synchronize parameters for activated devices. Note After enabling Sync. Parameters, activated devices will synchronize parameters. Inactivated devices will synchronize parameters whether enableing Sync. Parameters or not. Optional: Set Device Information.
• Page 48
  Video Intercom Villa Door Station User Manual Figure 6-5 Time Settings Click Save to save the settings after the configuration. Time Zone Select the device located time zone from the drop-down list. Time Sync. You should set the NTP server’s IP address, port No., and interval. Manual By default, the device time should be synchronized manually.
• Page 49
  Video Intercom Villa Door Station User Manual 6.7.4 Change Administrator’s Password Steps 1. Click System and Maintenance → System Configuration → System → User Management → User Management . 2. Click 3. Enter the old password and create a new password. 4.
• Page 50
  Video Intercom Villa Door Station User Manual Note If the function is enabled, the connected secure door control unit will be automatically bound to the door station and cannot be used for other door stations. 6.7.7 Set I/O Parameters You can set I/O Parameters on PC Web. Steps 1.
• Page 51
  Video Intercom Villa Door Station User Manual Figure 6-6 Elevator Control 2. Select Elevator No. 3. Slide to enable Elevator Control. 4. Set the elevator parameters. Elevator No. Select an elevator No. Interface Type The interface type is Network Interface by default. You need to enter the elevator controller’s IP address, port No., user name, and password for communication.
• Page 52
  Video Intercom Villa Door Station User Manual 6.7.9 View Device Arming/Disarming Information View device arming type and arming IP address. Click System Configuration → System → User Management → Arming/Disarming Information . You can view the device arming/disarming information. Click Refresh to refresh the page. 6.7.10 Network Settings Set Basic Network Parameters Click System and Maintenance →…
• Page 53
  Video Intercom Villa Door Station User Manual If you check the function, the system will allocate the IPv4 address, IPv4 subnet mask, the IPv4 default gateway, preferred DNS server and the Alternate DNS server automatically. DNS Server Set the preferred DNS server and the Alternate DNS server according to your actual need. IPv6 Three IPv6 modes are available.
• Page 54
  Video Intercom Villa Door Station User Manual Wi-Fi Settings Some models support Wi-Fi function. Steps 1. Click System Configuration → Network → Network Settings → Wi-Fi to enter the settings page. Figure 6-9 Wi-Fi 2. Enable Wi-Fi. 3. Click + Manual Add, and set corresponding parameters and Password of the Wi-Fi. 1) Enter the SSID.
• Page 55
  Video Intercom Villa Door Station User Manual It refers to the port through which the browser accesses the device. For example, when the HTTP Port is modified to 81, you need to enter http://192.0.0.65:81 in the browser for login. HTTPS Set the HTTPS for accessing the browser.
• Page 56
  Video Intercom Villa Door Station User Manual Figure 6-10 FTP Settings 2. EnableFTP. 3. Select Server Type. 4. Enter Server IP Address and Port. 5. Configure the FTP Settings, and the user name and password are required for the server login. Note If you enable Anonymous, you will not need to set user name and password.
• Page 57
  Video Intercom Villa Door Station User Manual Set VoIP When the device is deployed on the LAN, penetration service can be enabled to achieve remote device management. Steps 1. Click System Configuration → Network → Device Access → VoIP . 2.
• Page 58
  Video Intercom Villa Door Station User Manual Figure 6-11 Video Settings Page Set the stream type, the video type, the resolution, the Bit Rate type, the video quality, the frame rate, the Max. bitrate, the video encoding, and I Frame Interval. Click Save to save the settings.
• Page 59
  Video Intercom Villa Door Station User Manual Set the stream type, audio encoding, input volume, output volume, speak volume and audio sampling rate. Slide to enable Unlocking Sound according to your actual need. Check then click < or > to enable or disable SIP Audio Encoding. Note You can drag icon to adjust the order of the encoding.
• Page 60
  Video Intercom Villa Door Station User Manual OSD Configuration Steps 1. To adjust display settings. Click System and Maintenance → System Configuration → Image → OSD Configuration . 2. OSD is enabled by default. You can also slide to disable it. Click to choose what to display.
• Page 61
  Video Intercom Villa Door Station User Manual This function is mutually exclusive with some functions. After enabling target cropping, some functions will fail. Refer to the actual device for details. 6.7.13 Event Settings Set Motion Detection After enable the function of motion detection, people or stuff enter the configured area will trigger alarm.
• Page 62
  Video Intercom Villa Door Station User Manual Linkage Settings Steps 1. Click Event → Event Detection → Linkage Settings to enter the settings page. Figure 6-14 Linkage Settings 2. Select event. — Device Event Tampering Alarm — Door Event Door Open Timed Out (Door Contact) 3.
• Page 63
  Video Intercom Villa Door Station User Manual Figure 6-15 Access Schedule 2. Click +Add. Then you can edit the name of the schedule. 3. Drag cursor on corresponding timestamp to map valid access period. 4. You can also click Quick Operation to apply existing template. 5.
• Page 64
  Video Intercom Villa Door Station User Manual Set Door Parameters Click Access Control → Door Parameters . Figure 6-17 Door Parameters Settings Page Click Save to save the settings after the configuration. Door No. Select the device corresponded door No. Door Name You can create a name for the door.
• Page 65
  Video Intercom Villa Door Station User Manual Figure 6-18 Privacy Settings Upload Pic. When Auth. (Upload Captured Picture When Authenticating) Upload the pictures captured when authenticating to the platform automatically. Platform-Applied Personal PIN You can create the person PIN on the platform. You should apply the PIN to the device. You cannot create or edit the PIN on the device or PC Web.
• Page 66
  Video Intercom Villa Door Station User Manual Figure 6-19 Card Type Enable NFC Card Enable the function and you can present the NFC card to authenticate. In order to prevent the mobile phone from getting the data of the access control, you can disable NFC card to increase the security level of the data.
• Page 67
  Video Intercom Villa Door Station User Manual Figure 6-20 Device No. Settings 2. Select the device type from the drop-down list, and set the corresponding information including Building No., Floor No., Door Station No., Community No. and Unit No. Note When you select Outer Door Station as Device Type, only Community No.
• Page 68
  Video Intercom Villa Door Station User Manual 4. Enable Protocol 1.0. 5. Click Save to enable the settings. Time Duration Settings Set the Max. call duration. Go to Video Intercom → Call Paramters → Call Settings . Figure 6-22 Call Settings Set the Max.
• Page 69
  Video Intercom Villa Door Station User Manual Figure 6-23 Call Priority 2. Check the Call Type and set the Ring Duration of each 3 prioritys. 3. Click Save to enable the settings. Note The higher the level, the ealier the device to be called. After the call time is over, the next level of call is triggered.
• Page 70
  Video Intercom Villa Door Station User Manual Figure 6-24 Number Settings Click +Add, and set the Room No. and SIP numbers in the pop-up dialog box. Click Save to save the settings. 6.8 Maintenance and Security 6.8.1 Upgrade and Maintenance Reboot device, restore device parameters, and upgrade device version.
• Page 71
  Video Intercom Villa Door Station User Manual Sub Device Upgrade Click System and Maintenance → Maintenance → Upgrade . Set Upgrade Settings as RS-485 Card Reader, and select a card reader. Select an upgrade type from the drop-down list. Click and select the upgrade file from your local PC.
• Page 72
  Video Intercom Villa Door Station User Manual Note You can import the exported device parameters to another device. Data Migration Click Export to migrate user information and configuration details to other devices. The information and data include door station configuration data, advertisement information, ringtone and etc.
• Page 73
  Video Intercom Villa Door Station User Manual Note The function is only supported by certain device models. Create and Import Self-signed Certificate Steps 1. Go to System and Maintenance → Safe → Certificate Management . 2. In the Certificate Files area, select a Certificate Type from the drop-down list. 3.
• Page 74
  Video Intercom Villa Door Station User Manual Note The input certificate ID cannot be the same as the existing ones. 3. Upload a certificate file from the local. 4. Click Import.
• Page 75
  Video Intercom Villa Door Station User Manual Chapter 7 Configuration via Client Software 7.1 Device Management Device management includes device activation, adding device, editing device, and deleting device, and so on. After running the iVMS-4200, video intercom devices should be added to the client software for remote configuration and management.
• Page 76
  Video Intercom Villa Door Station User Manual Figure 7-1 Add to the Client…
• Page 77
  Video Intercom Villa Door Station User Manual 7.1.2 Add Device by IP Address Steps 1. Click +Add to pop up the adding devices dialog box. 2. Select IP/Domain as Adding Mode. 3. Enter corresponding information. 4. Click Add. 7.1.3 Add Device by IP Segment You can add many devices at once whose IP addresses are among the IP segment.
• Page 78
  Video Intercom Villa Door Station User Manual Note Up to 10 levels of organizations can be created. 7.3.2 Modify and Delete Organization You can select the added organization and click to modify its name. You can select an organization, and click X button to delete it. Note The lower-level organizations will be deleted as well if you delete an organization.
• Page 79
  Video Intercom Villa Door Station User Manual Note The picture should be in *.jpg format. Click Upload Select the person picture from the local PC to upload it to the client. Click Take Phone Take the person’s photo with the PC camera. Click Remote Collection Take the person’s photo with the collection device.
• Page 80
  Video Intercom Villa Door Station User Manual Steps 1. Select the person in the list and click Change Organization. 2. Select the organization to move the person to. 3. Click OK to save the settings. 7.4.4 Import and Export Person Information The person information can be imported and exported in batch.
• Page 81
  Video Intercom Villa Door Station User Manual Note The person information, including person details, person’s fingerprint information (if ● configured), and the linked card (if configured), will be imported to the selected organization. If the person name stored in the device is empty, the person name will be filled with the ●…
• Page 82
  Video Intercom Villa Door Station User Manual Figure 7-2 Issue Card in Batch 2. Click Settings.
• Page 83
  Video Intercom Villa Door Station User Manual Figure 7-3 Card Settings 3. Select Card Type and Card No. Type. 4. Click OK to save the settings. Result After issuing the card to the person, the person and card information will display in the Person(s) with Card Issued list.
• Page 84
  Video Intercom Villa Door Station User Manual Note For the user with access control module permissions, the user can enter the Access Control module and manage video intercom and search information. You should add the device to the software and configure the person to link the device in Access Control module before your configuration remotely.
• Page 85
  Video Intercom Villa Door Station User Manual Steps 1. On the video intercom settings page, click Notice to enter the page. 2. Click +Add to pop up the adding dialog box. 3. Select the person according to your needs. 4. Edit the Subject, Type and Information. 5.
• Page 86
  Video Intercom Villa Door Station User Manual Figure 7-4 Search Call Logs 2. Set the search conditions, including call status, device type, start time and end time. Call Status Click ˅ to unfold the drop-down list and select the call status as Dialed, Received or Missed. Or select All to search logs with all statuses.
• Page 87
  Video Intercom Villa Door Station User Manual Search Notice Steps 1. On the Video Intercom page, click Notice to enter the page. 2. Set the search conditions, including notice type, start time and end time. Type Select Advertising Information, Property Information, Alarm Information or Notice Information as Type according to your needs.
• Page 88
  Video Intercom Villa Door Station User Manual Chapter 8 Video Intercom Operation 8.1 Call Resident You can press the call button of the door station to call resident. Note Make sure you have added contacts to the device. ● Make sure you have configured the room No. for the call button. For more details. please refer ●…
• Page 89
  UD29244B-B…