1
WorkForce
®
WF-7510/WF-7520
Quick Guide
Your WorkForce WF-7510/WF-7520 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Using Special Papers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Placing Originals for Copying, Scanning, or Faxing. . . . . . . . . . . . . . . . . . . . . . 7
Copying a Document . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Printing From a Memory Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Printing From Your Computer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Faxing a Document. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Maintaining Your Product . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Scanning a Document or Photo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Solving Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Guide rapide
Votre WorkForce WF-7510/WF-7520 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Utilisation de supports spéciaux. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Positionnement des originaux . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Copie d’un document . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Impression depuis une carte mémoire. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Impression depuis un ordinateur . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Télécopie d’un document . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Numérisation d’un document ou d’une photo . . . . . . . . . . . . . . . . . . . . . . . . 65
Entretien de l’imprimante . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Résolution des problèmes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Avis. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Masuo_Masuo-P2_QG.book Page 1 T hursday, June 30, 2011 3:53 PM
WorkForce
®
WF-7510/WF-7520
Quick Guide
Your WorkForce WF-7510/WF-7520 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Using Special Papers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Placing Originals for Copying, Scanning, or Faxing. . . . . . . . . . . . . . . . . . . . . . 7
Copying a Document . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Printing From a Memory Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Printing From Your Computer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Faxing a Document. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Maintaining Your Product . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Scanning a Document or Photo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Solving Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Guide rapide
Votre WorkForce WF-7510/WF-7520 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Utilisation de supports spéciaux. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Positionnement des originaux . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Copie d’un document . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Impression depuis une carte mémoire. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Impression depuis un ordinateur . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Télécopie d’un document . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Numérisation d’un document ou d’une photo . . . . . . . . . . . . . . . . . . . . . . . . 65
Entretien de l’imprimante . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Résolution des problèmes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Avis. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
1
Your WorkForce WF-7510/
WF-7520
English
After you set up your WorkForce® WF-7510/WF-7520 (see the Start Here sheet), turn to
this Quick Guide and your online User’s Guide for instructions on using your product.
Note: The illustrations in this manual show the WorkForce WF-7520. The instructions
apply to both the WF-7510 and WF-7520 unless otherwise noted.
Features Where to find information
Copy, scan, and fax from the easy-to-use
control panel
Easy networking—Wi-Fi and Ethernet See the online User’s Guide.
Extra-high capacity ink cartridges See this Quick Guide for installation
Advanced paper handling with Automatic
Document Feeder and 250-sheet, wide-format
cassette
Wireless printing from mobile devices with
Epson Connect
Adjusting the Control Panel
See this Quick Guide for the basics.
See the online User’s Guide for details.
instructions.
See the Start Here sheet and the online
User’s Guide for paper loading instructions.
See www.epson.com/connect.
The control panel is adjustable. Squeeze the release bar underneath to raise or lower it as
shown.
2
Your WorkForce WF-7510/WF-7520
Using the Control Panel
The control panel makes it easy to use all the features of your product. To save energy, the
screen goes dark after several minutes of inactivity. Press any button to wake it up.
1 2 3 4 5 6 7 8
9
10
Tip: To turn off the “beep” heard when you press a button on the screen, press
select
Printer Setup
, select
Sound
, and select
Off
. If you turn off the sound, the dialing
sound made when you transmit a fax is also turned off.
Number Description
1 Turns product on/off
Photo
2 Press
3 Press
4 View menus and status on the LCD Screen
5 Use the arrow keys and
6 Enter numbers, letters, and symbols
7 Press
8 Press
9 Shows wireless network status
10 Resets the active menu selection to its default value
to access the Print Photos menu
Copy
to access your product’s Copy mode
OK
button to navigate menus
Fax
to access your product’s Fax mode
Scan
to access your product’s Scan mode
Setup
,
Using the Control Panel
3
Using Special Papers
Epson offers a wide array of high quality papers, making it easy to maximize the impact of
your photos, presentations, and creative projects.
You can purchase genuine Epson ink and paper at Epson Supplies Central
www.epson.com/ink3 (U.S. sales) or www.epson.ca (Canadian sales). You can also
purchase supplies from an Epson authorized reseller. To find the nearest one, call
800-GO-EPSON (800-463-7766).
Paper name Size
Epson Bright White Paper Letter (8.5 × 11 inches
[216 × 279 mm])
Epson Brochure & Flyer Paper Matte
Double-sided
Epson Premium Presentation Paper
Matte
Epson Premium Presentation Paper
Matte Double-sided
Epson Presentation Paper Matte Letter (8.5 × 11 inches
Letter (8.5 × 11 inches
[216 × 279 mm])
8 × 10 inches (203 × 254 mm) S041467 50
Letter (8.5 × 11 inches
[216 × 279 mm])
A3+ (13 x 19 inches
[330 x 483 mm])
A3 (11.7 x 16.5 inches
[297 x 420 mm])
11 x 14 inches
(279.5 x 355.6 mm)
Letter (8.5 × 11 inches
[216 × 279 mm])
[216 × 279 mm])
Legal (8.5 × 14 inches
[216 × 356 mm])
A3+ (13 × 19 inches
[330 × 483 mm])
11 × 17 inches
(279 × 432 mm)
®
at
Part
number
S041586 500
S042384 150
S041257
S04218050100
S041263 50
S041260 50
S041468 50
S041568 50
S041062 100
S041067 100
S041069 100
S041070 100
Sheet
count
4
Using Special Papers
Part
Paper name Size
Epson Ultra Premium Photo Paper
Glossy
Epson Premium Photo Paper Semi-
gloss
Epson Premium Photo Paper Glossy 4 × 6 inches (102 × 152 mm) S041808
Epson Photo Paper Glossy 4 × 6 inches (102 × 152 mm) S041809
Epson Photo Quality Self-adhesive
Sheets
Epson Iron-on Cool Peel Transfer
paper
4 × 6 inches (102 × 152 mm) S042181
5 × 7 inches (127 × 178 mm) S041945 20
8 × 10 inches (203 × 254 mm) S041946 20
Letter (8.5 × 11 inches
[216 × 279 mm])
11 × 14 inches
(279.5 ×355.6 mm)
11 × 17 inches
(279 × 432 mm)
A3 (11.7 × 16.5 inches
[297 × 420 mm])
A3+ (13 × 19 inches
[330 × 483 mm])
4 × 6 inches (102 × 152 mm) S041982 40
Letter (8.5 × 11 inches
[216 × 279 mm])
A3+ (13 x 19 inches
[330 x 483 mm])
5 × 7 inches (127 × 178 mm) S041464 20
8 × 10 inches (203 × 254 mm) S041465 20
Letter (8.5 × 11 inches
[216 × 279 mm])
11 x 17 inches (279 x 432 mm) S041290 20
A3+ (13 x 19 inches
[330 x 483 mm])
Letter (8.5 × 11 inches
[216 × 279 mm])
A4 (8.3 × 11.7 inches
[210 × 297 mm])
Letter (8.5 × 11 inches
[216 × 279 mm])
number
S04217460100
S042182
S0421752550
S041466 20
S041290 20
S041288 20
S041289 20
S041331 20
S041327 20
S04172740100
S042183
S0416672550
S0441289 20
S04203850100
S041141
S041649
S041271
S041106 10
S041153 10
Sheet
count
20
50
100
Note: Media availability varies by country.
Using Special Papers
5
For detailed paper loading instructions, see the Start Here sheet or online User’s Guide.
For best results:
■
Fan paper before loading.
■
Load paper printable side down; it is usually whiter or brighter.
■
Always load paper short edge first and make sure the edge guides are against the paper.
■
Make sure the paper is loaded against the edge guide and not sticking out from the
end of the cassette. The paper may slide forward slightly as you insert the cassette.
This is normal.
■
Do not use paper with binder holes.
6
Using Special Papers
Placing Originals for Copying,
Scanning, or Faxing
Before you copy, scan, or fax, place your documents on the scanner glass or in the
Automatic Document Feeder (ADF). Place photos on the scanner glass only.
Using the Scanner Glass
You can place a photo or a document up to A3 on the scanner glass.
1. Open the document cover.
2. Place your original facedown on the scanner
glass, with the top against the back left corner.
3. Close the cover gently to keep your original in
place.
Using the Automatic Document Feeder
You can place up to 30 letter- to A3-size sheets (11.69 × 16.54 inches) in the ADF. For
double-sided scanning, use letter- or A4-size paper only.
1. Open the ADF paper support, and then move the edge guide outward.
2. Fan the originals, then tap them on a flat surface to even the edges.
Placing Originals for Copying, Scanning, or Faxing
7
3. Insert the originals faceup, top edge first. The
Note: If you’re using the 2-up Copy layout, make sure the originals are loaded as
shown below.
ADF
icon appears on the screen.
4. Slide the edge guide against the originals, but not too tight.
8
Using the Automatic Document Feeder
Copying a Document
Follow the steps in this section to copy black-and-white or color documents.
Note: You can use the Copy/Restore Photos option to copy photos onto 4 × 6-inch
(102 × 152 mm) and 5 × 7-inch (127 × 178 mm) Epson photo paper (various types
available) for instant photo reprints. See the online User’s Guide for details.
You can copy documents onto plain paper, Epson Bright White Paper, or Epson
Presentation Paper Matte. If you use the Automatic Document Feeder (ADF), you can
copy up to 30 sheets at a time.
1. Load paper in the sheet feeder (see page 6).
2. Place your original document on the scanner glass, or load your documents in the
ADF (see page 7).
3. Press the
Copy
button.
4. Press u or d or use the numeric keypad to select the number of copies you want (up
to 99).
5. Press l or r to change the copy density (lightness or darkness).
6. To copy your original(s) onto a different size paper, press the
Reduce/Enlarge
button
and select one of the preset options or a custom paper size.
7. To change the print quality, press the
Standard Quality
.
8. To change other print settings, press x
Settings
■
.
To make double-sided copies (WorkForce WF-7520 only), select
Copying
. Then select the desired option and press OK.
Quality
Menu
button and choose
, then select
Paper and Copy
Copying a Document
Draft, Best or
2-Sided
9
■
To reduce your originals so that pages print side-by-side, two per sheet, select
2-up Copy
as the
Layout
setting. This is for use only with single-sided originals;
be sure to load them as shown on page 8.
■
You can also change the paper type, paper size, and other print settings. Press
u or d to select the setting, then press
then press
Note: Not all Paper Type, Paper Size, Layout, and Quality settings may be
available depending on the options you choose. See the online User’s Guide for
details.
OK
.
OK
. Press u or d to select an option,
9. After you finish selecting settings, press x
10. Press the
y
Note: When printing two-sided, if ink on the front of the paper smears, select a longer
Dry Time in the Paper and Copy Settings menu (WorkForce WF-7520 only).
Stop
B&W
.
or
Color xStart
button to begin copying. To cancel copying, press
Menu
to exit the settings menu.
10
Copying a Document
Printing From a Memory Card
Your product lets you print photos directly from your digital camera’s memory card; just
insert it into the memory card slot and you’re ready to print.
See the online User’s Guide for a list of compatible memory cards and instructions on
copying memory card files between your product and a computer, and printing photos
directly from your camera.
Inserting the Card
1. Make sure your printer is turned on.
2. Insert your card as shown.
Note: Do not force the card into the slot; it won’t go in all the
way.
The memory card access light flashes, then stays lit. Now you can
view your photos on the LCD screen and print them (see page 12).
Memory card
access light
Removing the Card
After you finish printing your photos, follow these steps to remove the card:
1. Make sure the memory card access light is not flashing.
Caution: Do not remove the card or turn off your printer while the memory card
access light is flashing; you may lose data on the card.
2. If the product is connected to your computer with a USB cable, do one of the
following before removing the memory card or turning off the printer:
■
Windows®: Right-click the name of your card (removable disk) in My
Computer or Windows Explorer, and select
■
Mac OS® X: Drag the removable disk icon from your desktop into the trash,
then remove the card.
3. Pull the card straight out of its slot.
Eject
.
Printing From a Memory Card
11
Printing Photos From the LCD Screen
You can select individual photos for printing as you view them on the LCD screen.
1. Load several sheets of Epson photo paper (various types available; see page 4).
2. Press the
3. Press l or r to scroll through your photos and display one that you want to print.
Note: To crop the photo, press the Display/Crop button. Press + or – to frame the
image; use the arrow buttons to move the frame. Press OK twice when done.
4. Press u or d to select the number of copies you want of that photo.
5. Repeat steps 3 and 4 to select more photos.
6. Press the x
Photo
button, then select
Menu
button, then select
View and Print Photos
Print Settings
.
. You see this screen:
7. Select the
8. If desired, press the y
Paper Size
and
Paper Type
Back
button and select
reduction or other photo-enhancing features.
9. When you’re done selecting settings, press the x
10. When you’re ready to print, press x
To cancel printing, press
12
Printing Photos From the LCD Screen
y Stop
.
of the paper you’ve loaded.
Photo Adjustments
Menu
button.
Print Photo
.
to turn on red-eye
Printing From Your Computer
This section describes the basic steps for printing from a Windows or Mac® computer. For
detailed instructions on printing, see the online User’s Guide.
Printing in Windows
1. Select the print command in your application.
Select your Epson
printer
Click here to open
your printer software
2. Make sure your Epson printer is selected, then click the
button.
(If you see a
Properties
Setup, Printer
on the next screen.)
, or
Options
button, click it. Then click
Printing From Your Computer
Preferences
or
Properties
Preferences
or
13
3. On the Main tab, select the basic print settings. Make sure you choose the correct
Paper Type
setting for the paper you are using (see page 15 for details).
Select your
Document Size
Click here
for quick
access to
settings
Note: For quick access to the most common settings, select one of the Printing
Presets on the left side of the screen. You can delete these presets or create your
own by clicking the
Add/Remove Presets
4. For more printing options, click the
Note: For more information about print settings, click Help or see your online
User’s Guide.
button.
More Options
tab.
Select your
Paper Type
Click here for
2-Sided Printing
5. Click OK to save your settings.
6. Click
OK
or
to start printing.
Printing With a Mac
Follow the steps below to print from Mac OS X 10.5 to 10.6. If you’re printing from Mac
OS X 10.4, see your online User’s Guide for instructions.
1. Open a photo or document in an application.
2. Open the
14
Printing With a Mac
File
menu and select
.
3. Select your Epson printer as the
Printer
setting.
Select your Epson printer
Click to expand, if
necessary
4. Select basic copy and page settings. For borderless printing, choose a
setting with a
Borderless
option by clicking on a paper size and selecting the
Paper Size
borderless option.
Note: If the setting you want isn’t shown (for example, Scale), check for it in your
application before printing or check for it at the bottom of this window.
Copy and page
settings
Application
settings
Pop-up menu
5. Choose
Quality
Print Settings
from the pop-up menu, and select your
and other print settings.
Media Type, Print
6. Choose any other printing options you may need from the pop-up menu. See the
online User’s Guide for details.
Printing With a Mac
15
7. Click
.
8. To monitor your print job, click the printer icon in the Dock.
Selecting the Correct Paper Type
Select the correct
Paper Type
(Windows) or
Media Type
(Mac OS X) setting in your
printer software so the ink coverage can be adjusted accordingly.
For this paper/media Select this setting
Plain paper
Epson Bright White Paper
Epson Presentation Paper Matte
Epson Photo Quality Self-adhesive Sheets
Epson Iron-on Cool Peel Transfer paper
Epson Ultra Premium Photo Paper Glossy Ultra Premium Photo Paper Glossy
Epson Premium Photo Paper Glossy Premium Photo Paper Glossy
Epson Photo Paper Glossy Photo Paper Glossy
Epson Premium Photo Paper Semi-gloss Premium Photo Paper Semi-Gloss
Epson Premium Presentation Paper Matte Premium Presentation Paper Matte
Epson Brochure & Flyer Paper Matte Double-sided
Envelopes Envelope
Plain Paper/Bright White Paper
16
Selecting the Correct Paper Type
Faxing a Document
Your product lets you send faxes by entering fax numbers, selecting entries from a speed
dial or group dial list, or using the one-touch dial buttons. Using the Automatic
Document Feeder (ADF), you can fax up to 30 pages at a time.
Note: You can also send or receive a fax from your computer using the Epson FAX
Utility. For more information, see the online User’s Guide.
Breakdown or repair of this product may cause loss of fax data and settings. Epson is
not responsible for backing up or recovering data and settings during or after the
warranty period. We recommend that you make your own backup or print out your fax
data and settings.
This product allows you to store names, telephone numbers, and fax data in its
memory even when the power is turned off. Use the following procedure to erase the
memory if you give away or dispose of the product: Select F
Settings > All Settings
data.
. This procedure will erase all of your network settings and fax
Connecting a Phone or Answering Machine
Setup > Restore Default
1. Connect the phone cable from the
wall jack to the
LINE
port on the back
of the product.
Note: If you’re connecting the
product to a DSL phone line, you
must plug a DSL filter into the wall
jack or you won’t be able to use the
fax or telephone equipment. Contact
your DSL provider for the necessary
filter.
2. To use a telephone or answering
machine, you need a second phone
cable. Connect one end of the cable to
the telephone or answering machine,
and connect the other end to the
EXT.
port on the back of the product.
Telephone
wall jack
Telephone
wall jack
Faxing a Document
17
In Auto Answer mode, if the incoming call is a fax and you pick up the phone or the
answering machine answers, the product automatically begins receiving the fax. If the
other party is a caller, the phone can be used as normal or a message can be left on the
answering machine.
Note: Any phone or answering machine must be connected to the
product to detect an incoming fax call when the phone is picked up. Epson cannot
guarantee compatibility with VoIP, cable phone systems, or fiberoptic digital services
such as FiOS™.
EXT.
port for your
Setting Up Fax Features
Before sending or receiving faxes, you should create a fax header and select the number of
rings before the fax answers.
Note: To select other settings or use the Epson FAX Utility, see the online
User’s Guide.
Entering Fax Header Information
You should enter your name and phone number in the fax header before sending faxes so
that recipients can identify the origin of the fax.
Note: If you leave your product unplugged for a long period of time, the date and time
settings may get lost. See the online User’s Guide for instructions on resetting them.
Entering Your Sender Name
1. Press the
2. Press u or d to select
Fax
button, then press x
Header
Menu
.
, then pressOK.
3. Press
OK
to select
Fax Header
.
4. Use the keypad to enter your sender name (see “Using the
Keypad to Enter Numbers and Characters” on page 19).
You can enter up to 40 digits.
5. When you’re done, use the arrow buttons to select
the Header screen.
18
Setting Up Fax Features
Done
, then press OK to return to
Entering Your Phone Number
1. From the Header screen, press u or d to select
Your Phone Number
, then press OK.
You see the phone number input screen.
2. Use the numeric keypad to enter your phone number (up to 20 digits).
3. When you’re done, press
4. Press x
Menu
to exit the Fax Menu.
OK
.
Using the Keypad to Enter Numbers and Characters
When entering phone numbers and text in Fax mode, follow these guidelines:
■
To enter a fax number, use the numeric keypad. Press the #button to insert the
+
symbol for international phone numbers. Press r to enter a space or l to delete a
character.
■
To enter characters, use the l, r, u, or d arrow buttons to
highlight a letter on the screen. Press
OK
to select it.
Use the on-screen function buttons to select uppercase
(
AB12
), lowercase (
ab12
), symbols (
!#%@
), or spaces
( ), or to delete characters ( ).
When you’re finished, highlight
Done
and press OK.
Function buttons
Selecting the Number of Rings to Answer
If you connected an answering machine and it is set to pick up on the fourth ring, you
should set the product to pick up on the fifth ring or later:
1. Press the
2. Press u or d to select
3. Press u or d to select
Fax
button, then press x
Communication
Rings to Answer
Menu
.
, then press OK.
, then press OK.
4. Press u or d or use the numeric keypad to select the number of rings, then press
Select more rings than you use for the answering machine.
5. Press x
Menu
to exit the Fax Menu.
Setting Up Fax Features
OK
.
19
Sending a Fax From the Control Panel
You can send a fax by manually entering a fax number, as described below.
Note: To dial the number using a telephone, by redialing, or by selecting from your
speed dial list, see the next section. To send a fax from your computer using the Epson
FAX Utility, see your online User’s Guide.
1. Press the
2. Place your original(s) for faxing (see page 7).
3. Use the numeric keypad to enter the fax number. You can enter up to 64 digits.
Fax
button.
4. To change fax settings, press x
5. Press the
Note: If the recipient’s fax machine prints only in black and white, your fax is
automatically sent in black and white even if you select color.
■
B&W
or
Color xStart
If you are scanning with the ADF, your document is automatically scanned and
Menu
and select settings as necessary.
button to send your fax.
faxed.
■
If you place your document on the scanner glass, you can scan additional pages
after the first one is sent.
■
If the fax number is busy, you see a redialing message and the product redials
after one minute. To redial immediately, press
To cancel faxing, press y
Stop
at any time.
Redial/Pause
Other Ways to Dial a Fax Number
Here are some other ways you can dial a fax number:
■ Redial/Pause
■ Speed Dial
group dial entry, press the
■
If you’ve connected a telephone to the product, dial the number from the phone.
Select
: Redial the last fax number you used.
: Select or type the number of the speed dial entry and press OK. To use a
Send
, then press the
Speed Dial
B&W
or
button twice.
Color xStart
button.
.
Note: Don’t hang up the phone until you begin transmitting the fax.
If you turn off the product, the following data stored in the product’s temporary memory
will be lost: received faxes that haven’t yet been printed, faxes scheduled to be sent
later, and faxes being retransmitted automatically.
20
Sending a Fax From the Control Panel
Receiving Faxes
Before receiving faxes, make sure you load plain paper and select the correct settings for the
paper you’ve loaded.
1. Press the
2. Press x
3. Select
Note: If the incoming fax is larger than the paper you loaded, it is reduced to fit or
printed on multiple pages, depending on the Auto Reduction setting you select.
4. Press x
To receive faxes automatically, press the
on the
Note: To change the number of rings before the product
answers, see page 19.
Paper Size
Auto
light.
Fax
button.
Menu
Menu
and select
Receive Settings
.
and make sure the setting matches the size of paper you loaded.
when done.
Auto
button to turn
Auto Answer light
If you run out of paper during printing, you see an error
message. Load more paper and press the
x
Start
button to continue.
To receive faxes manually, turn off the
B&W
or
Auto
light and follow
Color
these steps:
1. When your telephone rings, lift the phone off the hook.
2. Select
Receive
, then press the
B&W
or
Color xStart
button.
3. After all the pages are received, replace the phone on the hook.
4. Press
OK
to print the fax.
Receiving Faxes
21
Maintaining Your Product
Follow the instructions in this chapter to check and clean the print head nozzles, check ink
levels, and replace ink cartridges. If you need to align the print head, see the online
User’s Guide.
Caution: To keep your product looking like new, don’t place anything on top of the
cover or use it as a writing surface, If you need to clean the cover, use only a soft, nonabrasive microfiber-type cloth.
Checking the Print Head Nozzles
If your printouts are faint or have gaps in them, some of the nozzles in the print head may
be clogged or ink may be running low in one or more of the ink cartridges. Follow the
steps below to check the print head nozzles.
1. Load a few sheets of plain paper.
2. Press
F Setup
.
3. Press u or d to select
4. Select
5. Press the
6. Check the nozzle check pattern that prints to see if there are gaps in the lines.
7. If there are no gaps, the print head is clean. Select
22
Maintaining Your Product
Nozzle Check
ColorxStart
press y
Back
to continue printing.
If there are gaps or the pattern is faint, select
(see page 23).
Maintenance
, then press OK.
button.
Nozzles are clean Nozzles need cleaning
, then press OK.
Finish Nozzle Check,
Head Cleaning
to clean the print head
and then
Cleaning the Print Head
If print quality has declined and the nozzle check indicates clogged nozzles, you can clean
the print head. Print head cleaning uses ink, so clean it only if necessary.
Note: You cannot clean the print head if an ink cartridge is expended, and may not be
able to clean it when a cartridge is low. You must replace the cartridge first (see
page 25).
1. Load a few sheets of letter- or A4-size paper.
2. Press
3. Press u or d to select
F Setup
.
Maintenance
, then press OK.
4. Press u or d to select
Head Cleaning
, press OK, then press OK again.
5. Choose the colors you want to clean.
Tip: Use the nozzle check pattern to determine which
colors need cleaning. You can save ink by cleaning only
selected colors.
Cleaning lasts around 2 1/2 minutes. When it’s finished,
you see a message on the LCD screen.
Caution: Never turn off the product during head cleaning or you may damage it.
6. Press 2 to run a nozzle check and confirm that the print head is clean.
Note: If you don’t see any improvement after cleaning the print head four times, leave
the product on and wait at least six hours to let any dried ink soften. Then try cleaning
the print head again. If quality does not improve, one of the ink cartridges may need to
be replaced. If that doesn’t help, contact Epson as described on page 34.
If you do not use your product often, it is a good idea to print a few pages at least once
a month to maintain good print quality.
Cleaning the Print Head
23
Checking Ink Levels
You can check the ink levels anytime right on the LCD screen. To check the ink levels with
your Windows or Macintosh software, see the instructions in your online User’s Guide.
Note: Printing stops when an ink cartridge is expended. If a color cartridge is expended,
you may be able to continue printing temporarily with black ink; see the online User’s
Guide for more information. If the black cartridge is expended, you must replace it to
continue printing.
1. Press
2. Press
F Setup
OK
to select
.
Ink Levels
.
3. The ink cartridge status is displayed. See page 25 to replace
a cartridge, if necessary.
4. Press y
Back
to exit.
In Windows, a window may appear on your computer screen if you try to print when ink
is low. This window can optionally display ink offers and other updates from Epson.
Note: To disable checking for ink offers or updates from Epson, see the instructions in
your online User’s Guide.
Purchasing Epson Ink Cartridges
You can purchase genuine Epson ink and paper at Epson Supplies Central at
www.epson.com/ink3 (U.S. sales) or www.epson.ca (Canadian sales). You can also
purchase supplies from an Epson authorized reseller. To find the nearest one, call
800-GO-EPSON (800-463-7766).
Use the following list when you order or purchase new ink cartridges:
Ink color High-capacity Extra High-capacity
Black 126 127
Cyan 126 127
Magenta 126 127
Yellow 126 127
24
Checking Ink Levels
Note: We recommend that you use genuine Epson cartridges and do not refill them.
The use of other products may affect your print quality and could result in product
damage.
Yields vary considerably based on images printed, print settings, paper type, frequency
of use, and temperature. For print quality, a small amount of ink remains in the cartridge
after the “replace cartridge” indicator comes on. The product ships with full cartridges
and part of the ink from the first cartridges is used for priming the product.
For best printing results, use up a cartridge within six months of opening the package
and before the expiration date on the cartridge box.
Store ink cartridges in a cool, dark place. If cartridges have been exposed to cold
temperatures, allow them to warm up to room temperature for at least 3 hours before
using them.
Replacing Ink Cartridges
Make sure you have a new ink cartridge before you begin.
Caution: Do not open ink cartridge packages until you are ready to install the ink.
Cartridges are vacuum packed to maintain reliability.
Leave the expended cartridge installed until you have obtained a replacement, or the
ink remaining in the print head nozzles may dry out.
1. Turn on the product.
2. If an ink cartridge is low or expended, you see a message
on the LCD screen indicating which color to replace. Press
OK
.
If you’re replacing a cartridge before you see a message on
the LCD screen, press
select
Ink Cartridge Replacement
F Setup
, select
.
Maintenance
3. Open the scanner, then open the cartridge cover.
, then
Replacing Ink Cartridges
25
4. Squeeze the tab on the cartridge and lift it up. Dispose of it
carefully. Do not take the used cartridge apart or try to refill
it.
Warning: If ink gets on your hands, wash them thoroughly
with soap and water. If ink gets into your eyes, flush them
immediately with water. Keep ink cartridges out of the
reach of children and don’t drink the ink.
5. Before you open the new cartridge package, shake it gently four or five times. Then
remove it from the package.
6. Remove the yellow tape from the bottom of the ink
cartridge.
Caution: Do not remove any other labels or seals, or
ink will leak. Do not touch the green chip on the front
of the cartridge. This can damage the ink cartridge.
7. Insert the new ink cartridge into the holder and push it
down until it clicks into place.
8. Once you replace all the cartridges that need replacing, close the cartridge cover and
push it down until it clicks into place.
9. Close the scanner to begin charging the ink. This takes about 2 1/2 minutes. When
you see a completion message on the LCD screen, ink charging is finished.
Caution: Never turn off the product while ink is charging or you’ll waste ink. If you see
an ink replacement message on the LCD screen, press OK and press down all the
cartridges securely. Then press OK again. If you remove a low or expended ink
cartridge, you cannot reinstall and use the cartridge.
26
Replacing Ink Cartridges
Scanning a Document or
Photo
You can use your product to scan original documents and photos and save them on your
computer.
Quick Scanning With the Scan Button
Use the
You can even scan a photo and have it automatically included in an email message.
Note: For Mac OS X 10.6, see “Scanning With Mac OS X 10.6” on page 29.
1. Place your original document or photo as shown on page 7.
2. Press the
3. Press u or d to select one of the following options:
4. If you’re scanning to a memory card, select your scan settings and then press x
Scan
button to quickly scan a photo or document and save it on your computer.
Scan
button.
■ Scan to Memory Card
an inserted memory card.
■ Scan to PC
ideal for scanning photos.
■ Scan to PC (PDF)
ideal for scanning documents.
■ Scan to PC (Email)
application, and attaches a JPG image to a new outgoing message. This works
with MAPI-type email such as Microsoft
not web-based email such as Gmail.
■ Scan to PC (WSD)
Windows Vista (English only). To use this feature, you must first set up WSD
(Web Services for Devices) on the computer you want to scan to.
Scan
to begin scanning.
automatically creates a JPG image and saves it to your computer;
automatically creates a JPG image or PDF and saves it to
automatically creates a PDF file and saves it to your computer;
automatically scans a photo, resizes it, launches your email
®
Outlook or Windows Live Mail, but
lets you manage wireless scanning in Windows 7 or
Start
If you’re scanning to your computer, select
connected by a USB cable, or select the name of your computer if your product is
connected over a network. Press
Once your image is scanned, you see its icon in Windows Explorer or Mac Finder
as an attachment in your email application.
OK
USB Connection
to begin scanning.
Scanning a Document or Photo
if your product is
®
, or
27
Loading…
Start Here
5
Load paper
You can load 3.5 5 inch (89 127 mm) to 13 19 inch (330
453 mm) paper. For instructions on loading envelopes,
legal-size paper or larger paper, see the online User’s Guide.
1
Pull out one of the paper
cassettes at the bottom of
the printer.
2
Slide the edge guides outward, and position the guide
shown below for the size of paper you’re using.
Note:
To load wide-format paper, press the tray release button
and pull the paper tray as shown until it clicks into place.
3
Insert the paper with the glossy or printable side
facedown.
4
Slide the edge guides against the paper, but not too
tight. Make sure the paper is under the tabs on the edge
guides.
5
Replace the cover and gently insert the paper cassette.
6
Extend the output tray as shown.
Read these instructions before using your product.
1
Unpack
French control
panel stickers
Caution:
Do not open ink cartridge packages until you are ready to
install the ink. Cartridges are vacuum packed to maintain reliability.
Note:
These illustrations show the WF-7520, but the instructions are the
same for the WF-7510 unless otherwise noted.
Remove all protective materials.
Caution:
Do not remove the plastic strip as
shown. It is part of the Automatic Document
Feeder.
2
Turn on
1
Connect the power cord to the back of the printer and to an
electrical outlet.
Caution:
Do not connect to your computer yet.
2
Squeeze the release bar underneath to raise the control
panel. Then press the
On button.
Note:
If you want to lower the control panel, squeeze the
release bar underneath
.
Caution:
To avoid damaging the printer, make sure you
squeeze the release bar to lower the control panel. Don’t try to
push it down without releasing it.
3
Select settings
1
To select
English as your language, press OK.
If you want to change the language, press or to
select it, then press
OK.
2
Select your country/region and press
OK.
3
Select your
Daylight Saving Time setting (Winter/
Summer), and press OK.
4
Select the date format and press
OK.
5
Press the number keys to enter the date and press
OK.
6
Select the time format (
12h or 24h) and press OK.
7
Press the number keys to enter the time. Then press
or to select
AM or PM, if necessary.
8
Press
OK.
Note:
You can change the date and time settings using the printer’s
control panel. For more information, see the online User’s Guide.
4
Install ink cartridges
1
Lift up the scanner unit.
2
Open the cartridge cover.
3
Shake the ink cartridges gently 4 or 5 times, then unpack
them.
4
Remove only the yellow tape from each cartridge.
Caution:
Don’t remove any other seals or the cartridges may
leak.
5
Insert the cartridges in the holder for each color.
6
Press each cartridge down until it
clicks.
7
Close the cartridge cover. Press
down until it clicks.
8
Lower the scanner unit.
9
Press
OK to prime the ink delivery system. This takes
about 5 minutes.
Note:
Your printer ships with full cartridges and part of the ink
from the first cartridges is used for priming the printer.
Caution:
Don’t turn off the printer while it is priming or you’ll
waste ink.
10
When you see this menu on
your product’s LCD screen,
do not press any buttons
yet. Continue following the
instructions in the following
sections to load paper in your
product and install software.
*412201800*
*412201800*
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 11
- 12
- 13
- 14
- 15
- 16
- 17
- 18
- 19
- 20
- 21
- 22
- 23
- 24
- 25
- 26
- 27
- 28
- 29
- 30
- 31
- 32
- 33
- 34
- 35
- 36
- 37
- 38
- 39
- 40
- 41
- 42
- 43
- 44
- 45
- 46
- 47
- 48
- 49
- 50
- 51
- 52
- 53
- 54
- 55
- 56
- 57
- 58
- 59
- 60
- 61
- 62
- 63
- 64
- 65
- 66
- 67
- 68
- 69
- 70
- 71
- 72
- 73
- 74
- 75
- 76
- 77
- 78
- 79
- 80
- 81
- 82
- 83
- 84
- 85
- 86
- 87
- 88
- 89
- 90
- 91
- 92
- 93
- 94
- 95
- 96
- 97
- 98
- 99
- 100
- 101
- 102
- 103
- 104
- 105
- 106
- 107
- 108
- 109
- 110
- 111
- 112
- 113
- 114
- 115
- 116
- 117
- 118
- 119
- 120
- 121
- 122
- 123
- 124
- 125
- 126
- 127
- 128
- 129
- 130
- 131
- 132
- 133
- 134
- 135
- 136
- 137
- 138
- 139
- 140
- 141
- 142
- 143
- 144
- 145
- 146
- 147
- 148
- 149
- 150
- 151
- 152
- 153
- 154
- 155
- 156
- 157
- 158
- 159
- 160
- 161
- 162
- 163
- 164
- 165
- 166
- 167
- 168
- 169
- 170
- 171
- 172
- 173
- 174
- 175
- 176
- 177
- 178
- 179
- 180
- 181
- 182
- 183
- 184
- 185
- 186
- 187
- 188
- 189
- 190
- 191
- 192
- 193
- 194
- 195
- 196
- 197
- 198
- 199
- 200
- 201
- 202
- 203
- 204
- 205
- 206
- 207
- 208
- 209
- 210
- 211
- 212
- 213
- 214
- 215
- 216
- 217
- 218
- 219
- 220
- 221
- 222
- 223
- 224
- 225
- 226
- 227
- 228
- 229
- 230
- 231
- 232
- 233
- 234
- 235
- 236
- 237
- 238
- 239
- 240
- 241
- 242
- 243
- 244
- 245
- 246
- 247
- 248
- 249
- 250
- 251
- 252
- 253
- 254
- 255
- 256
- 257
- 258
- 259
- 260
- 261
- 262
- 263
- 264
- 265
- 266
- 267
- 268
- 269
- 270
- 271
- 272
- 273
- 274
- 275
- 276
- 277
- 278
- 279
- 280
- 281
- 282
- 283
- 284
- 285
- 286
- 287
- 288
- 289
- 290
- 291
- 292
- 293
- 294
- 295
- 296
- 297
- 298
- 299
- 300
- 301
- 302
- 303
- 304
- 305
- 306
- 307
- 308
- 309
- 310
- 311
- 312
- 313
- 314
- 315
- 316
- 317
- 318
- 319
- 320
- 321
- 322
- 323
- 324
- 325
- 326
- 327
- 328
- 329
- 330
- 331
- 332
- 333
- 334
- 335
- 336
- 337
- 338
- 339
- 340
- 341
Epson WorkForce WF-7510 Quick SetUp Guide
Quick Setup Guide
4 pages
en
User’s Guide
341 pages
en
Quick Guide
88 pages
en
fr
Epson WorkForce WF-7510 Specification
The Epson WorkForce WF-7510 is a versatile wide-format all-in-one printer designed for small office and home office environments. It supports printing, scanning, copying, and faxing, offering robust functionality for various business needs. The printer boasts a maximum print resolution of 5760 x 1440 optimized dpi, ensuring sharp and vibrant outputs suitable for both text and graphics. The device is equipped with Epson’s DURABrite Ultra pigment ink, which provides smudge, fade, and water-resistant prints, enhancing longevity and archival quality.
The WF-7510 supports wide-format media, handling paper sizes up to 13 x 19 inches, which is ideal for larger documents, posters, and creative projects. Its input tray can accommodate up to 250 sheets, reducing the need for frequent refills. Additionally, it features a 30-sheet automatic document feeder (ADF) for efficient handling of multi-page documents. The printer is powered by PrecisionCore technology, offering fast print speeds of up to 15 pages per minute for black and 8.4 pages per minute for color prints, optimizing productivity.
Connectivity options include wired Ethernet, Wi-Fi, and USB, ensuring flexible integration into various network environments. The printer supports mobile printing via Epson Connect, Apple AirPrint, and Google Cloud Print, providing convenient printing options from smartphones and tablets. The 4.3-inch color touchscreen interface enhances user experience, allowing easy navigation and control of settings and functions. The Epson WorkForce WF-7510 combines high-quality output, wide-format capabilities, and efficient performance, making it a suitable choice for users requiring versatile printing solutions.
To connect your Epson WorkForce WF-7510 to a wireless network, press the Home button on the printer’s control panel. Select Wi-Fi Setup, choose Wi-Fi Setup Wizard, and follow the on-screen instructions to select your network and enter the password.
If your Epson WF-7510 is not printing, check if the printer is turned on and connected to the same network as your computer. Ensure there are no error messages on the printer’s display. Verify that the printer is selected as the default printer on your computer and that there are no pending print jobs.
To clean the print head, press the Home button and select Setup, then select Maintenance. Choose Head Cleaning and follow the on-screen instructions. It is recommended to run a nozzle check afterward to ensure the cleaning was successful.
The Epson WorkForce WF-7510 supports a variety of paper types including plain paper, Epson Bright White Paper, Epson Photo Paper, and envelopes. It can handle sizes up to 13 x 19 inches.
To replace an ink cartridge, make sure the printer is turned on, then open the scanner unit. Wait for the ink cartridge holder to stop moving, then squeeze the tab on the cartridge and lift it out. Insert the new cartridge into the holder and press it down until it clicks into place.
If your Epson WF-7510 is printing blank pages, check the ink levels and replace any empty cartridges. Run a nozzle check to see if the print head is clogged and perform a cleaning if necessary. Ensure that the correct paper size and type are selected in the print settings.
To scan a document, place it on the scanner glass or in the ADF. Press the Home button, select Scan, and choose your scan destination. Follow the on-screen instructions to complete the scanning process.
To improve print quality, ensure you are using the correct paper type and quality settings. Perform a print head alignment and cleaning if necessary. Use genuine Epson ink cartridges to ensure optimal performance.
To update the firmware, press the Home button and select Setup. Choose Firmware Update and follow the on-screen prompts to download and install the latest firmware. Make sure your printer is connected to the internet during this process.
Regular maintenance tasks for the Epson WF-7510 include cleaning the print head, performing print head alignments, checking and replacing ink cartridges as needed, and keeping the scanner glass clean. Ensure the printer firmware is up to date for optimal performance.