This article describes in detail how to use FtyCamPro camera, including how to connect FtyCamPro camera, function settings, etc.
It is suitable for all FtyCamPro cameras, such as mini cameras, bulb cameras, indoor and outdoor cameras, etc.
FtyCamPro APP Download
FtyCamPro supports Android and iPhone, you can download it from google play or app store.
Connection Notes
- To use FtyCamPro APP, please allow all permissions, otherwise you may not be able to connect to the camera. (You can turn off the unneeded permissions after setting the network mode)
- To connect FtyCamPro camera, you need to turn on the GPS location of your phone, and turn on the gps location permission of FtyCamPro APP, so that the app can get the wifi information of the camera. (You can turn off the permission after setting the network mode)
- If the APP can’t add camera automatically, please try to close the SIM card network.
- After connecting to the camera’s hotspot wifi, the phone prompts no network, to switch wifi, please choose not to switch.
Connect FtyCamPro Camera To Wifi
Before connecting the FtyCamPro camera, please connect the camera to the power supply, if it is a battery camera, please press the on/off button to start the studio.
AP Mode
FtyCamPro will transmit a wifi, after connecting to the camera’s wifi you can control the camera.
AP mode can only use the camera if it is connected to the camera’s hotspot wifi, this mode is only to help networking and proximity use.
1. After you start FtyCamPro camera, open your phone’s wifi settings, connect the camera’s hotspot wifi.
The camera’s hot wifi name format is: XXX000000XXXXX , if you can’t find the camera’s hot wifi, please reset the camera.
2. After the phone connects to the camera’s wifi, open FtyCamPro APP will add the camera automatically.
If it is not added automatically, please try to refresh or quit the app to reopen and check the connection notes.
If you want to use it remotely, please continue the setup.
Networking Mode
Networked mode can use the camera remotely, as long as there is network, you can view the camera at any time. After setting the network mode, the camera’s hotspot wifi will be hidden.
1. In order to connect to your wifi quickly, please set it up next to your router.
2. Click on Settings, WiFi, and then select your wifi.
3. Enter your wifi password, click Confirm setting, then wait for the camera to connect to your wifi, about 30-60 seconds.
If it keeps showing offline, then the camera can not connect to wifi, please reset the camera and reconnect, and make sure your wifi password is correct.
FtyCamPro camera can be used by multiple people at the same time.
1. Go to camera settings, there is a QR code in the settings page, please save it and send it to the person who wants to add the camera. (Please save the QR code, the QR code contains the camera ID, username and password information.)
2. Download the app on the phone where you want to add FtyCamPro camera, then open the app, click + , select Add a device which online, click the icon in the upper right corner, scan the saved QR code to add the camera.
Recording Settings
FtyCamPro camera supports local recording and memory card recording.
- Local Recording: It is saved in the phone, you need to open the app all the time to record.
- Memory Card Recording: Save in the memory card, as long as the camera is started after setting recording, it will record, no need to open the APP.
Local recording settings
In the live video interface, click the record icon to start recording, this mode requires the live video interface to be open all the time in order to record.
Memory card recording
To use memory card recording, you need to insert a memory card to set it, FtyCamPro camera supports 4-128G memory card, please insert the memory card when the camera is off, otherwise the camera may not be able to read the memory card.
1. Click SD-Card, open Schedule and All day or set recording time, then click Confirm setting to save.
View Recorded Video
Click on the recording icon to view the video, Local is the local recording video file, Peer is the recording file saved in the memory card.
Motion Detection Alarm Setting
When FtyCamPro camera detects a moving object in the screen, it will send a notification to your phone, and you can also set it to record and take pictures.
1. Enter the Alarm interface, click Motion Detect to select the detection sensitivity, and then click Confirm setting to save.
- Triger Recording: Recording when a moving object is detected.
- Triger Capture: Detects moving objects to take pictures.
FtyCamPro APP Interface Description
iPhone
- Camera settings
- Landscape viewing
- sound switch
- unknown
- View recorded video
- video color control
- sound control
- PTZ control (not supported by mini camera)
- local photo
- voice intercom (mini camera does not support)
- Local video recording
- horizontal flip
- vertical flip
- display transmission data
- night vision switch (mini camera only supports manual switch)
- white light switch
- switch resolution
Android
- camera settings
- landscape viewing
- sound switch
- horizontal flip
- vertical flip
- display transmission data
- White light switch
- Switching lens
- switch resolution
- Local photo taking
- Voice intercom (mini camera does not support)
- local recording
- June 12, 2024
- FtyCamPro
Convenient Client
User Guide
App Installation
- Download and install FtyCamPro；please useApp Store and Google PlayforIOS and Android versions respectively. To facilitate installation, please scathe QR code below to install FtyCamPro. If your devices unable to connector Google Play, you can scan the APK QR code below. Note: You areadvisedtouse an original or third-party QR code scanner to download the App. The App cannot be downloaded by using the scanner of WeChat.
https://qr06.cn/E5lwDP
- Click “+” to add a networked camcorder (the name is similar to XXX-nnnnnn-YYYYY), and the device will automatically connect.
- After switching to the WIFI connection page, select the corresponding WIFI hotspot and connect. After the connection is successful, return to the APP, and the device is added successfully. (If the APP does not automatically add a device, click Search to add the searched device)
- Please fill in the camcorder name and P2P password(default password: admin). Click “Yes”. The camcorder is successfully added. You are advised to modify the P2P password after the camcorder settings are finished.
- After the camcorder is successfully connected, click the newly added camcorder forreal-time videos. The device can be controlled on the video interface.
- Icons and buttons on thevideopage
| Shoo snapshots and record videos
—|—
| Vertical and horizontal rotation of images - Other page functions
| View the screenshotting the camcorder
—|—
| View the videos in your mobile device
| View the alarm log of the camcorder
Camera Settings
- Click the gearbuttonto enter the advanced configuration page
- Configure the WIFI connection for thecamcorder.Select “ WIFI setting “to display available Wi-Fi hotspots.Selectyour Wi-Fi network name (SSID),input the password,and presser “ Completion”button.Note:If the camcorder icing WIFI status afterbeingsaved, it will disconnect the current connection for a new WIFI network, which will make the camcorder offline for about one minute antheap.
- SD card recording settings: Set the SD card mode and recording.
- Alarm configuration:Enableordisable motion detection alarm and settheinterval for alarms.
Basic Settings and Indicator Status:
A new camcorder or camcorder is installed in a new location, please reset the
camcorder to factory settings. (After the camcorder is started, press and hold
the camcorder reset button for more than 5 seconds), after the camcorder
restarts turn on the AP mode, the WIFI indicator flashes slowly (Flashes once
0.5 seconds). Then open the phone settings, connect the phone to the camcorder
AP hotspot (the WIFI network with the camcorder UID), and wait for the phone
to switch to the camcorder WIFI network before opening the App.
Indicator Status:
- In AP mode after booting, the blue indicator is always on and the red indicator is the USB power indicator, and it goes out after fully charged.
- When configuring Wifi routing,thered indicator is normally on, while the blue one flickers rapidly. After successfulconfiguration,the blueindicator is normally on. (Please confirm whether the Wifi password iscorrectif the blue indicator keeps flickering rapidly)
- The green indicator Isa charging indicator, and it will automatically go out after the camcorder is fully charged.
Note: Please inspect the following items if the App keeps prompting
failures:
A .Before configuring the Wifi network,thecamcorder indicator does not flicker
slowly or it is not started;
B .The phone fails toconnecttothecamcorder AP, and itisrequired toconnectthe
phone tot heap hotspotofthe camcorder;
C .An ordinaryrouteriscompatible,but thepublicrouterfailsto be compatible
becauseitisrequiredtologon for authentication;
D .Avoid any mistake of network name, password,and UID;
E .Chinese Wifi names, passwords and special symbols are not compatible
currently;
F.5G Wifi signals are not compatible;
FAQ
1.Q: Why does the APP fail to detect the camcorder/match a network?
A: Please ensure the deviceiscorrectly connected and inspect whether the APP
operation is restricted.
2.Q: Why doesthecamcorder keep asking me toinputusername and password? Or why
does it prompt incorrect user name?
A: The default password isodomon. If you forget your user name andpassword,
please reset it to factory settings togetthedefault user name and password.
3.Q: How can I reset thecamcordertofactory settings?
A: Press the reset button for about5 seconds until the camcorder is restarted.
4.Q: Why istheimage vague?
A: Remove the protective film for thelens.If it’s still vague, you can rotate
the lens and focus to get clear images.
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any Changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>
Download This Manual (PDF format)
Download this manual >>
How To Set Up FtyCamPro Camera , This article describes in detail how to use FtyCamPro camera, including how to connect FtyCamPro camera, function settings, etc.
It is suitable for all FtyCamPro cameras, such as mini cameras, bulb cameras, indoor and outdoor cameras, etc.
FtyCamPro Camera APP Download
FtyCamPro supports Android and iPhone, you can download it from google play or app store.
Connection Notes
· To use FtyCamPro APP, please allow all permissions, otherwise you may not be able to connect to the camera. (You can turn off the unneeded permissions after setting the network mode)
· To connect FtyCamPro camera, you need to turn on the GPS location of your phone, and turn on the gps location permission of FtyCamPro APP, so that the app can get the wifi information of the camera. (You can turn off the permission after setting the network mode)
· If the APP can’t add camera automatically, please try to close the SIM card network.
· After connecting to the camera’s hotspot wifi, the phone prompts no network, to switch wifi, please choose not to switch.
Connect FtyCamPro Camera To Wifi
Before connecting the FtyCamPro camera, please connect the camera to the power supply, if it is a battery camera, please press the on/off button to start the studio.
AP Mode
FtyCamPro will transmit a wifi, after connecting to the camera’s wifi you can control the camera.
AP mode can only use the camera if it is connected to the camera’s hotspot wifi, this mode is only to help networking and proximity use.
1. After you start FtyCamPro camera, open your phone’s wifi settings, connect the camera’s hotspot wifi.
The camera’s hot wifi name format is: XXX000000XXXXX , if you can’t find the camera’s hot wifi, please reset the camera.
2. After the phone connects to the camera’s wifi, open FtyCamPro APP will add the camera automatically.
If it is not added automatically, please try to refresh or quit the app to reopen and check the connection notes.
If you want to use it remotely, please continue the setup.
Networking Mode
Networked mode can use the camera remotely, as long as there is network, you can view the camera at any time. After setting the network mode, the camera’s hotspot wifi will be hidden.
1. In order to connect to your wifi quickly, please set it up next to your router.
2. Click on Settings, WiFi, and then select your wifi.
3. Enter your wifi password, click Confirm setting, then wait for the camera to connect to your wifi, about 30-60 seconds.
If it keeps showing offline, then the camera can not connect to wifi, please reset the camera and reconnect, and make sure your wifi password is correct.
Share FtyCamPro Cameras
FtyCamPro camera can be used by multiple people at the same time.
.
See also FtyCamPro For PC: How to use FtyCamPro on PC
.
1. Go to camera settings, there is a QR code in the settings page, please save it and send it to the person who wants to add the camera. (Please save the QR code, the QR code contains the camera ID, username and password information.)
2. Download the app on the phone where you want to add FtyCamPro camera, then open the app, click + , select Add a device which online, click the icon in the upper right corner, scan the saved QR code to add the camera.
Recording Settings
FtyCamPro camera supports local recording and memory card recording.
· Local Recording: It is saved in the phone, you need to open the app all the time to record.
· Memory Card Recording: Save in the memory card, as long as the camera is started after setting recording, it will record, no need to open the APP.
Local recording settings
In the live video interface, click the record icon to start recording, this mode requires the live video interface to be open all the time in order to record.
Memory card recording
To use memory card recording, you need to insert a memory card to set it, FtyCamPro camera supports 4-128G memory card, please insert the memory card when the camera is off, otherwise the camera may not be able to read the memory card.
1. Click SD-Card, open Schedule and All day or set recording time, then click Confirm setting to save.
View Recorded Video
Click on the recording icon to view the video, Local is the local recording video file, Peer is the recording file saved in the memory card.
.
See also FtyCamPro Camera FAQ and Troubleshooting
.
Motion Detection Alarm Setting
When FtyCamPro camera detects a moving object in the screen, it will send a notification to your phone, and you can also set it to record and take pictures.
1. Enter the Alarm interface, click Motion Detect to select the detection sensitivity, and then click Confirm setting to save.
· Triger Recording: Recording when a moving object is detected.
· Triger Capture: Detects moving objects to take pictures.
FtyCamPro APP Interface Description
iPhone
8.PTZ control (not supported by mini camera)
10.voice intercom (mini camera does not support)
14.display transmission data
15.night vision switch (mini camera only supports manual switch)
Android
6.display transmission data
11.Voice intercom (mini camera does not support)
FtyCamPro Camera FAQ and Troubleshooting
You can check here for frequently asked questions about FtyCamPro Camera, such as camera offline, resetting the camera, etc.
Why the camera is not displayed when I connect to the hotspot wifi of FtyCamPro camera?
1.Make sure your phone is connected to the hotspot wifi of FtyCamPro camera, some phones will automatically disconnect the wifi that cannot be connected.
2.Make sure you have turned on the GPS location of your phone and the GPS location permission of APP, due to the limitation of the system, you need to turn on the GPS permission for APP to get the camera information.
3.If you are an Apple phone, check whether you have opened the Local Network permission of FtyCamPro APP.
4.Close the SIM card network, then close the APP and reopen it.
Why is my FtyCamPro Camera offline?
FtyCamPro camera shows offline in AP mode, please make sure your phone has a hotspot wifi connection to the camera, and close to the camera, AP mode only supports close connection.
FtyCamPro camera shows offline in network mode, please try to reset the camera to reconnect, and put the camera close to the router, sometimes the distance is far, the wifi signal is not good.
.
See also How To SetUp FtyCamPro Camera (Ultimate Manual)
.
Why does the FtyCamPro camera show offline after I set it to connect to my wifi?
This is usually due to wrong wifi password or bad wifi signal, please reset the camera to reconnect, and make sure you enter the correct wifi password.
What is the default username and password for the FtyCamPro camera?
The default user name of FtyCamPro camera is: camera0
The password is random, it will be changed to a new password every time you reset the camera.
You can change the user name and password in the Access settings.
How do I reset the FtyCamPro camera?
Press and hold the reset button for 5 seconds to reset the camera, after reset the FtyCamPro camera will be restored to factory settings, you need to reconnect the camera.
Forgot the password of FtyCamPro camera?
You can reset the camera and delete it, then reconnect it.
FtyCamPro For PC: How to use FtyCamPro on PC
FtyCamPro is an app for security cameras， With the increasing prevalence of smart security systems, this app has gained popularity among users looking for an efficient way to monitor their homes or other locations directly from their PC. In this article, we will explore how to use the FtyCamPro app on a Windows or Mac computer.
First of all, FtyCamPro only supports cell phones, there is no computer software. Fortunately, there are multiple ways to run the Android application on a desktop computer, allowing users to enjoy the features of FtyCamPro on a larger screen.
How to Install FtyCamPro on PC
FtyCamPro is a popular app that enables you to monitor and control your FtyCamPro cameras remotely. However, to use it on your PC, you will need to install an Android emulator like BlueStacks. In this section, we will guide you on how to install FtyCamPro on PC using BlueStacks.
Using BlueStacks
1.Download BlueStacks: First, download the BlueStacks 5 software, if you haven’t already installed it on your computer. BlueStacks is a widely-used emulator that allows you to run Android apps on your PC.
2.Install BlueStacks: After downloading the software, run the .exe file and follow the on-screen installation instructions. It’s a straightforward process and should only take a few minutes to complete.
3.Open BlueStacks: Once BlueStacks is successfully installed, open the application. It may take some time to load the emulator during the initial launch.
4.Search for FtyCamPro: In BlueStacks, click on the search bar and type “FtyCamPro.” The app should appear in the search results. Click on the app to access its dedicated installation page.
5.Install FtyCamPro: On the FtyCamPro installation page, click the “Install” button to begin the installation process. BlueStacks will download the app and install it on your PC.
6.Run FtyCamPro: After the installation is completed, go back to the BlueStacks main screen, and you should see the FtyCamPro app among your installed apps. Simply click on the app to launch it.
.
Now that you have FtyCamPro installed on your PC using BlueStacks, you can use it to monitor and control your security cameras with ease. Remember to configure the app with your camera settings and ensure that your PC and the cameras are connected to the internet for a seamless experience.
FtyCamPro For PC
Once the emulator is installed, users simply need to search for FtyCamPro within its interface and click “install.” The app will then be available for use on the PC, allowing users to take advantage of all its functions, including real-time monitoring and function settings.
For further assistance with FtyCamPro, including the setup process, camera connection, and troubleshooting, refer to the detailed user guide provided by camapp365. This manual is suitable for all FtyCamPro cameras and provides comprehensive information to ensure a smooth user experience.
In summary, FtyCamPro is an excellent solution for those looking to monitor their network cameras through their PC. By following the steps outlined above and consulting the available resources, users can expect a hassle-free setup and efficient camera management.
Can I use FtyCamPro on my computer without an emulator?
No, FtyCamPro only has mobile app, no PC software, and FtyCamPro camera does not support ONVIF, rtsp, so you can’t use FtyCamPro on PC in other ways.
FtyCamPro setup, FtyCamPro camera setup, FtyCamPro installation, FtyCamPro guide, IP camera setup, Wi-Fi camera setup, home security camera setup
FtyCamPro app setup, FtyCamPro mobile app, FtyCamPro network setup, FtyCamPro cloud storage, FtyCamPro motion detection setup, FtyCamPro recording setup
how to set up FtyCamPro camera, FtyCamPro setup for beginners, FtyCamPro setup step by step, FtyCamPro quick start guide
FtyCamPro camera connection, FtyCamPro WiFi setup, FtyCamPro app connection, FtyCamPro live view, FtyCamPro remote access
FtyCamPro camera not connecting, FtyCamPro app not working, FtyCamPro no video, FtyCamPro connection problems
FtyCamPro, IP camera setup, Wi-Fi camera, home security camera, camera setup
how to connect FtyCamPro camera to WiFi, how to set up motion detection on FtyCamPro, how to access FtyCamPro camera remotely, FtyCamPro app for iOS, FtyCamPro app for Android
FtyCamPro smart home integration, FtyCamPro cloud storage, FtyCamPro AI features, FtyCamPro cybersecurity
Access directly
The APP supports accessing the device directly by the peer-to-peer or under the same router.
Please connect to the device or the router to which the device is connected to
User guild
Click the following icon to get help of every step.
Power on
Click the key “On/Off” to power on the device
AP mode
If the device out of the package please click the key “Mode” to set the device to AP mode, at this time the indicator LED should be flash slowly.
Connect to AP
Click “Connect to the device’s”, APP will jump to the system setting, please set the wifi to the AP like ‘XXXnnnnnnYYYYY.
Auto-binding
While the AP appears on the status bar, click the ‘FtyCamPro’ to back to the APP, the device will be added automatically and the APP will jump to the monitoring activity.
Add Device
Bluetooth connection
If your device supports Bluetooth, just choose this.
Access directly
Access the camera peer-to-peer closely, rather than access it remotely.
Online device
Add an online device by searching, by QR-code scanning, or input device information by hand.
Qwerty123
⭐⭐⭐
Здравствуйте, у меня возникла проблема с подключением камеры FtyCamPro к моему телефону через Wi-Fi. Кто-нибудь знает, как это сделать?
Admin123
⭐⭐⭐⭐
Для подключения камеры FtyCamPro к телефону через Wi-Fi необходимо скачать и установить приложение, предоставленное производителем. Затем нужно подключить камеру к вашей домашней сети Wi-Fi и следовать инструкциям в приложении для завершения подключения.
TechnoPro
⭐⭐⭐⭐⭐
Дополню предыдущий ответ: после установки приложения и подключения камеры к сети Wi-Fi, вам нужно будет ввести пароль от вашей сети в настройках камеры. После этого вы сможете просматривать видео с камеры прямо на вашем телефоне.
Newbie2022
⭐⭐
Спасибо за советы! У меня всё получилось, камера теперь подключена к моему телефону через Wi-Fi. Очень удобно!
Вопрос решён. Тема закрыта.
- Где находится река Обь: материк и часть света?
- Передача имущества с забалансом: как это сделать?
- Какой цирк лучше: Цветной или Вернадского?