Hall of fame 2 инструкция на русском

TC ELECTRONIC HALL OF FAME 2 X4 REVERB — гитарная педаль эффекта ревербератор

• Описание

• Спецификация

Картинка с сайта: manualmachine.com

User Manual

HALL OF FAME 2 X4 REVERB

Acclaimed Reverb Pedal Expanded with 4 MASH Switches,
Shimmer Reverb and 8 Reverb Presets

Картинка с сайта: manualmachine.com

2 HALL OF FAME 2 X4 REVERB User Manual

Table of Contents

Important Safety Instructions ……………………………….. 3

Legal Disclaimer ……………………………………………………. 3

Limited warranty …………………………………………………… 3

1. About this Manual …………………………………………….. 4

2. Introduction ……………………………………………………… 4

2.1 Unpacking ………………………………………………………………….. 4

2.2 True Bypass ………………………………………………………………… 4

2.3 Setting Up ………………………………………………………………….. 4

3. TonePrint ………………………………………………………….. 4

3.1 What are TonePrints? ………………………………………………… 4

3.2 Transferring TonePrints to your pedal ………………….. 5

3.3 Editing TonePrints with the TonePrint App ………….. 5

4. Inputs, Output and Controls ………………………………6

4.1 Power / Computer connection ……………………………….. 6

4.2 Audio in and out ……………………………………………………….. 6

4.3 Other rear panel features ………………………………………… 6

4.4 Switching ……………………………………………………………………. 6

4.5 Eect controls ……………………………………………………………. 6

4.6 Reverb types………………………………………………………………. 7

5. Operation ………………………………………………………… 8

5.1 Signal chain placement …………………………………………… 8

5.2 MASH switch ……………………………………………………………… 8

5.3 Expression Pedal Setup ……………………………………………. 9

6. Bypass Mode …………………………………………………… 10

6.1 True Bypass and Buered Bypass explained ………. 10

6.2 Switching between True Bypass and

Buered Bypass ………………………………………………………………. 10

6.3 Kill-dry on/o …………………………………………………………… 10

7. Maintenance …………………………………………………….10

7.1 Updating the rmware ……………………………………………. 10

8. MIDI ………………………………………………………………… 11

9. Links ……………………………………………………………….. 11

10. Specications ………………………………………………… 12

Картинка с сайта: manualmachine.com

3 HALL OF FAME 2 X4 REVERB User Manual

Important Safety
Instructions

Terminals marked with this symbol carry
electrical current of sucient magnitude

to constitute risk of electric shock.
Use only high-quality professional speaker cables with
¼» TS or twist-locking plugs pre-installed. Allother
installation or modication should be performed only
by qualiedpersonnel.

This symbol, wherever it appears,

alertsyou to the presence of uninsulated

dangerous voltage inside the
enclosure-voltage that may be sucient to constitute a
risk ofshock.

This symbol, wherever it appears,

alertsyou to important operating and

maintenance instructions in the
accompanying literature. Please read the manual.

Caution

To reduce the risk of electric shock, donot

remove the top cover (or the rear section).
No user serviceable parts inside. Refer servicing to
qualied personnel.

Caution

To reduce the risk of re or electric shock,

do not expose this appliance to rain and
moisture. The apparatus shall not be exposed to dripping
or splashing liquids and no objects lled with liquids,
suchas vases, shall be placed on the apparatus.

Caution

These service instructions are for use

by qualied service personnel only.
Toreduce the risk of electric shock do not perform any
servicing other than that contained in the operation
instructions. Repairs have to be performed by qualied
servicepersonnel.

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in

accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as
radiators, heat registers, stoves, or other apparatus
(including ampliers) that produce heat.

or grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding-type plug
has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety. Ifthe
provided plug does not t into your outlet, consult an
electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or
pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.

11. Use only attachments/accessories specied by
themanufacturer.

12. Use only with the
cart, stand, tripod, bracket,
or table specied by the
manufacturer, orsold with
the apparatus. When a cart
is used, use caution when
moving the cart/apparatus
combination to avoid

injury from tip-over.

13. Unplug this apparatus during lightning storms or
when unused for long periods of time.

14. Refer all servicing to qualied service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power supply cord or plug
is damaged, liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been exposed
to rain or moisture, does not operate normally, or has
beendropped.

15. The apparatus shall be connected to a MAINS socket
outlet with a protective earthing connection.

16. Where the MAINS plug or an appliance coupler is
used as the disconnect device, the disconnect device shall
remain readily operable.

17. Correct disposal of this
product: This symbol indicates that
this product must not be disposed
of with household waste,
according to the WEEE Directive
(2012/19/EU) and your national

law. This product should be taken
to a collection center licensed for the recycling of waste
electrical and electronic equipment (EEE). The
mishandling of this type of waste could have a possible
negative impact on the environment and human health
due to potentially hazardous substances that are generally
associated with EEE. At the same time, your cooperation
in the correct disposal of this product will contribute to
the ecient use of natural resources. For more
information about where you can take your waste
equipment for recycling, please contact your local city
oce, or your household waste collection service.

18. Do not install in a conned space, such as a book
case or similar unit.

19. Do not place naked ame sources, such as lighted
candles, on the apparatus.

disposal in mind. Batteries must be disposed-of at a
battery collection point.

21. Use this apparatus in tropical and/or
moderate climates.

LEGAL DISCLAIMER

Music Tribe accepts no liability for any loss which
may be suered by any person who relies either
wholly or in part upon any description, photograph,
or statement contained herein. Technical specications,
appearances and other information are subject to
change without notice. All trademarks are the property
of their respective owners. Midas, Klark Teknik,
Lab Gruppen, Lake, Tannoy, Turbosound, TC Electronic,
TC Helicon, Behringer, Bugera, Auratone and Coolaudio
are trademarks or registered trademarks of Music Tribe
Global Brands Ltd. © Music Tribe Global Brands Ltd.
2019 All rights reserved.

LIMITED WARRANTY

For the applicable warranty terms and conditions
and additional information regarding Music Tribe’s
Limited Warranty, please see complete details online at
musictribe.com/warranty.

Zhongshan Eurotec Electronics Limited

No. 10 Wanmei Road, South China Modern Chinese
Medicine Park, Nanlang Town, 528451, Zhongshan City,
Guangdong Province, China

Картинка с сайта: manualmachine.com

4 HALL OF FAME 2 X4 REVERB User Manual

1. About this Manual

Thank you for spending your hard-earned money on this TC Electronic product!
We have done our best to ensure that it will ser ve you for many years to come,
and we hope that you will enjoy using it.

This manual is available as a PDF download from the TC Electronic website.

Please read this manual in full, or you may miss
important information.

Please do not operate your TC device before you have made all connections
to external equipment as described in the “2.3 Setting Up” section. In the
subsequent sections of the manual, we assume that all connections are made
correctly and that you are familiar with the previous sections.

We reserve the right to change the contents of this
manual at any time.

To download the most current version of this manual, view the product warranty,
and access the growing FAQ database for this product, visit the web page

tcelectronic.com/support/

2. Introduction

The original HALL OF FAME REVERB delivered some of the most iconic reverb
sounds of all time, but HALL OF FAME 2 X4 REVERB extends that legacy of
innovation dramatically. Essentially, HALL OF FAME 2 X4 REVERB’s incredible
MASH technology adds an expression pedal to a world-class reverb stompbox
that not only responds to your touch and saves precious pedalboard space – but
blends the celestial world of reverb with the ultimate in personal expression.
Add a scintillating new Shimmer eect, and you’ve got a reverb pedal unlike any
other – the awe-inspiring HALL OF FAME 2 X4 REVERB.

2.1 Unpacking

Your TC Electronic eect pedal box should contain the following items:

• Your TC Electronic eect pedal

• 1 USB cable (Type A to Mini-B)

• 1 TC Electronic sticker

• 9 V power supply

• 2 rubber feet

• Quick Start Guide

Inspect all items for signs of transit damage. In the unlikely event of transit
damage, inform the carrier and supplier. If damage has occurred, keep all
packaging, as it can be used as evidence of excessive handling force.

2.3 Setting Up

Connect the included 9 V power supply, or a regulated 9 V power supply with at
least 300 mA and the following symbol (center negative) to the DC input socket of
your TC Electronic eect pedal.

• Plug the power supply into a power outlet.

• Connect your instrument to the input jack using a ¼» jack cable.

• Connect the output jack to your amplier using a ¼» jack cable.

• The pedal also supports stereo operation (see Chapter 4.2).

3. TonePrint

This TC Electronic product supports TonePrints. To learn more about TonePrints,
go to tcelectronic.com/toneprint/

3.1 What are TonePrints?

When you look at your TC Electronic eect pedal, you’ll only see a few knobs.
For some pedals, it’s just one knob. So – one knob, one function, right?

Actually, there’s a lot more to it than meets the eye.

Star-tweaked signature sounds

When TC Electronic builds an eect pedal, the relationship between its controls
and many parameters “under the hood” are dened by developers, musicians
and product specialists who live and breathe sound. This gives you an excellent
starting point: a great-sounding pedal with well-balanced controls.

But wouldn’t it be cool to have world-famous guitar players – guys like
Paul Gilbert, Guthrie Govan, John Petrucci or Steve Vai – virtually rewire your
reverb pedal, dening what should happen “behind the scenes”?

And how about doing this yourself?

This is exactly what TonePrint allows you to do.

TC Electronic is working with top guitar players who explore a pedal’s hidden
tonal potential, redening the controls and creating their personal TonePrints.
And we are making these custom TonePrints available to you. Uploading them
to your pedal is really easy (see chapter 3.2 for details) – and with the amazing
TonePrint app, you can even create your own signature pedal, tweaked
specically to your liking.

You can change the TonePrints in your pedal as often as you like, and the best
part: It’s totally free.

2.2 True Bypass

Here at TC, we have a simple philosophy: When you are using one of our products,
you should hear something great – and when it’s o, you shouldn’t hear it at
all. This is why this pedal sports True Bypass. When it is bypassed, it is really o
and has zero inuence on your tone, resulting in optimum clarity and zero loss of
high end.

Sometimes, it is advisable to switch an eect pedal from True Bypass to Buered
Bypass mode. For more information, see “6.2 Switching the pedal from True
Bypass to Buered Bypass”.

Картинка с сайта: manualmachine.com

5 HALL OF FAME 2 X4 REVERB User Manual

3.2 Transferring TonePrints to your pedal

TonePrints can be transferred via USB connection or via TCs
“Beaming” technology.

Transferring via USB – step by step

• Connect the pedal to the power supply.

• Connect your pedal via USB cable to your computer or smar tphone/tablet

(use a “USB On-The-Go” adapter for Android devices and the Camera
Connection Kit for iOS devices).

• Launch the TonePrint app and follow the instructions to turn the TonePrint

selector knob to a TonePrint slot.

• Find the TonePrint you want to audition or use. You can browse TonePrints

by Artist or Product (i.e. pedal type). Browsing by Artist or Product is
selected in the Settings part of the app (press the “ ” icon).

• Listen to the new sound through your pedal. As long as you’re

connected via USB, selecting a TonePrint will change the sound in your
product immediately.

• Alternatively, you can create your own TonePrint using the editor part of the

app – see section 3.3.

• Press “Store in Pedal” to store the TonePrint of your choice in the selected

TonePrint slot.

• Turn the TonePrint selector knob to a dierent slot if you want to store more

TonePrints.

3.3 Editing TonePrints with the TonePrint App

The TonePrint app allows you to use TonePrints created by your favorite guitar
and bass players. But this is only the start. Using the TonePrint editor within the
app, you can create your very own signature pedal sounds. All of TCs own ar tist
TonePrints in the Library tab (or alternatively all TonePrints in the Templates tab)
can be edited, as can your own User TonePrints. In order to use the editor the
TonePrint pedal must be connected to your computer or smartphone/tablet via
USB, like described previously. Simply navigate to a TonePrint or Template and
click on the “ ” icon to enter the editor part of the app.

Features of the editor part of the app

• Use the TonePrint app to build your own custom sounds and save them in

your pedal or as User TonePrints which will show up in the User tab.

• Enjoy complete control over all eect parameters and eect behavior — it’s

your vision, your sound.

• Customize knob function and knob range to suit your needs and sounds.

• Audition your sonic creations in real time — make changes on the y and

listen to results immediately.

• Works with PC, Mac, and smartphones (iOS and Android).

Beaming TonePrints to your pedal – step by step

• When not connected via USB, simply launch the TonePrint app on your

smartphone.

• Navigate to the TonePrint you want to use. You can browse by Artist or by

Product (as described above).

• Plug your guitar or bass into the pedal.

• Turn your TonePrint pedal on.

• Turn up the volume on your instrument and set the pickup selec tor to

one pickup.

• Hold the speaker of your smartphone next to the chosen pickup and touch

“Beam to Pedal”. Follow instructions on your screen. A series of green ashes
of the LED will conrm successful beaming.