Инструкция taranis x9 lite

Картинка с сайта: manualspro.net

FrSky 2.4GHz Access Taranis X9 Lite/ Taranis X9 Lite S

Introduction

Taranis X9 Lite/X9 Lite S inherits its classic form factor from the FrSky
Taranis X9D series remote control, with the addition of a program scroll
button adding convenience when navigating the menu further improving the user
experience. Some additions the S version has are dual momentary buttons on the
top shoulders and hall sensor gimbals. The changes are not only on the
exterior, this upgraded version features Accurate SWR indicator along with the
addition of our PARA Wireless Trainer Function, making it compatible with the
FrSky Free Link App and AirLink S, while the wired training port is still
retained. Balance charging for 2S Li-ion battery is now possible via the USB
with an included USB cable.

The Taranis X9 Lite/X9 Lite S also uses the latest ACCESS communication
protocol, along with ErskyTX/OpenTX open-source operating system, which boasts
24 channels with a faster baud rate and lower latency because of its high-
speed module digital interface. ACCESS features like wireless firmware updates
and wireless configurations are completely supported, providing a more
reliable more secure link between the transmitter and model. Even more
practical features will be unlocked gradually, making the X9 Lite/X9 Lite S a
fully functioning remote control with a ton of extra features.

Layout

Картинка с сайта: manualspro.net

Switch

• SA: 3 positions; Short lever
• SB: 3 positions; Long lever
• SC: 3 positions; Short lever
• SD: 2 positions; Short lever
• SE: 2 positions; Momentary; Short lever
• S1: Knob Switch

SF & SG: Tact switch; Momentary

1. Micro SD card is not provided with shipment.
2. USB port is for upgrading, reading / writing Micro SD card and internal memory of radio contents.
3. Smart Port is for firmware upgrade for all FrSky S.Port devices.

Specifications

• Dimension: 184170101mm (LWH)

• Weight: Taranis X9 Lite 505g (without battery)
  Taranis X9 Lite S 525g (without battery)

• Operating system: ErskyTX/OpenTX

• Number of channels: 24 channels

• Internal RF Module: ISRM-N/ISRM-S-X9

• Operating voltage range: 6.0~8.4V

• Operating current: 160mA@7.4V

• Operating Temperature: -10℃~60℃ (14℉~140℉)

• Backlight LCD resolution: 128*64

• Model memories: 60 models (expandable by Micro SD card)

• Smart Port, Micro SD card slot, Micro USB Port and DSC Port

Features

• Ergonomic and compact design

• Installed with ACCESS protocol

• Supports spectrum analyzer function

• High-speed module digital interface

• G7 Noble potentiometer gimbal (Taranis X9 Lite)
  G7-H92 hall gimbal (Taranis X9 Lite S)

• Supports wired training function

• Haptic vibration alerts and voice speech outputs

• Easily accessible battery compartment (*Batteries not included,adaptive with replaceable 18650 button top Li-ion batteries for X9 Lite/flat-top Li-ion batteries for X9 Lite S)

Comparison List

Картинка с сайта: manualspro.net

About USB 2S Li-battery balance charging :
The Green Power indicator LED state:
Led on: charging
Led off: charge end
Led flash: charge fault

Note:

1. Charge the battery with the USB adapter (Voltage:5V+0.2V Current:＞2.0A) when you use the USB charging function.
2. The lower the initial charging voltage, the better the charging effect is when the voltage difference between the two cells exceed 50 mV.

To navigate the menus, Taranis X9 Lite/Taranis X9 Lite S has the following
elements:

• Scroll Button
• MENU Button
• PAGE Button
• EXIT Button

Taranis X9 Lite/Taranis X9 Lite S supports ErskyTX / OpenTX system

Scroll Button

To navigate menus or widgets, roll the button to left or right as navigation.

To go to the main menu, press the button, and hold for one second.

PAGE Button

To go to switch the page, press the button.

EXIT Button

To exit current page or operation widgets.

Картинка с сайта: manualspro.net

Step 1: Set the Mode for Taranis X9 Lite/Taranis X9 Lite S Internal RF.

Press Scroll button or MENU button and hold one second, go to the main menu,
select [Model Setup], go to [Protocol], select the [Internal] [Enable], and
select [Proto] [Acces].

Step 2: Set the Channel Range

The Internal RF module of Taranis X9 Lite/Taranis X9 Lite S supports up to 24
channels. The channel range is configurable, and needs to be confirmed before
use.

Step 3: Set the Receiver Number

When you create a new model, the system will assign you a receiver number
automatically, but this can be easily changed. The range of the receiver
number is 00-63, with the default number being 01 (use 00 is not recommended).
Once the receiver is set to desired number and is bound to the Taranis X9
Lite/Taranis X9 Lite S, the bind procedure will not need to be repeated unless
the receiver number is changed. In this case, either set the receiver number
to the previous one or repeat the bind procedure.

Step 4: Registration

Select [Register], press F/S button, and power it on, The display will show
the RX xx and press the Menu button or the Scroll button to complete process.
then power down the receiver.

Картинка с сайта: manualspro.net

Step 5: Automatic binding (Smart Match )

Move the cursor to Receiver 1 [BIND], and select it, power your receiver,The
display will show the RX xx and press the Menu button or the Scroll button to
complete process. the system will confirm “Bind ok”. (You do not need to press
the “F/S” button in ACCESS Protocol to bind. Refer to the receivers manual for
details.)

Картинка с сайта: manualspro.net

Step 6: Set Failsafe mode

There are 4 failsafe modes: No pulse, Hold, Custom and receiver. No Pulse: on
loss of signal the receiver produces no pulses on any channel.
Hold: the receiver continues to output the last positions before signal
was lost.
Custom: pre-set to required positions on lost signal.
Receiver: set the failsafe on the receiver (see receiver instructions) in
ACCESS Protocol.

Step 7: Range

Range refers to Taranis X9 Lite/Taranis X9 Lite S range check mode. A pre-
flight range check should be done before each flying session. Move the cursor
to [Range Check] and press the Scroll Button. In range check mode, the
effective distance will be decreased to 1/30. Press the EXIT to exit.

About OpenTX:

Scroll Button

To navigate menus or widgets, roll the button to left or right as navigation.

FLYING SAFETY

Warning:

To ensure the safety of yourself and others, please observe the following
precautions. Have regular maintenance performed. Although your X9 Lite
protects the model memories with non-volatile EEPROM memory (which does not
require periodic replacement) and of a battery, it still should have regular
check-ups for wear and tear. We recommend sending your system to your FrSky
Service Center annually during your non-flying-season for a complete check-up
and service.

Battery

Using a fully charged battery (DC 6.0~8.4V). A low battery will soon die,
causing loss of control and a crash. When you begin your flying session, reset
your transmitter’s built-in timer, and during the session pay attention to the
duration of usage. Also, if your model used a separate receiver battery, make
sure it is fully charged before each flying session.
Stop flying long before your batteries become over discharged. Do not rely on
your radio’s low battery warning systems, intended only as a precaution, to
tell you when to recharge. Always check your transmitter and receiver
batteries prior to each flight.

Where to Fly

We recommend that you fly at a recognized model airplane flying field. You can
find model clubs and fields by asking your nearest hobby dealer.

At the flying field

1. Pull throttle stick to idle position, or otherwise disarm your motor/engine.
2. Turn on the transmitter power and allow your transmitter to reach its home screen.
3. Confirm the proper model memory has been selected.
4. Turn on your receiver power.
5. Test all controls. If a servo operates abnormally, don’t attempt to fly until you determine the cause of the problem.
6. Start your engine.
7. Complete a full range check.
8. After flying, bring the throttle stick to idle position, engage any kill switches or otherwise disarm your motor/ engine.

Updates

FrSky is continuously adding features and improvements to our radio systems.
Updating (via USB Port or the Micro SD card) is easy and free. To get the most
from your new transmitter, please check the download section of the FrSky
website for the latest update firmware and guide for adjusting your sticks.
(www.frsky-rc.com)

FrSky Electronic Co., Ltd.
www.frsky-rc.com
Contact us: frsky@frsky-rc.com
Add: F-4,Building C, Zhongxiu Technology Park, No.3 Yuanxi Road, Wuxi, 214125,
Jiangsu, China
Technical Support: sales4tech@gmail.com

FrSky 2.4GHz Access Taranis X9 Lite/ Taranis X9 Lite S User Manual – Download
[optimized]
FrSky 2.4GHz Access Taranis X9 Lite/ Taranis X9 Lite S User Manual –
Download

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>