Download Article
Download Article
- Building Your Dog’s Body
- Building Your Dog’s Legs and Tail
- Building Your Dog’s Head
- Enjoying Your Dog
- Tips
- Warnings
- Things You’ll Need
|
|
|
|
|
|
Have you ever wanted to build a LEGO dog, but didn’t know where to start? LEGOs are a fantastic toy; they’re fun to play with as well as being a great outlet for creative expression. Once you learn what the different blocks are and all the different ways you can use them, there’s no limit to what you can build.
-
To complete the following project, you will need the following bricks. If you don’t have the correct colors, don’t worry. Your dog can be whatever color you want it to be, depending on the options you have in front of you.
- 10 brown 2×2 bricks
- 3 brown 2×4 bricks
- 1 brown 2×3 brick
- 8 brown 1×2 bricks
- 5 black 1×2 brick
- 6 brown 1×1 bricks
- 1 black 2×4 brick
- 1 brown 1×4 brick
- 2 white 1×1 bricks
-
Line four brown 2×2 LEGO bricks in a row from left to right.[1]
Then place another four brown 2×2 LEGO bricks next to that (also going from left to right.) The rows should be positioned directly next to one another. When you are finished, you should have eight brown 2×2 LEGO bricks lying side by side in two rows of four each.[2]
Advertisement
-
To do this, gather two brown 2×4 bricks. Place one brown 2×4 brick on top of the right side of the base, positioned over the middle two studs and covering the last three studs (the brick should extend past the base by a distance of one stud.) Place another brown 2×4 brick right behind it, still covering the middle studs.
- When you finish, all of the middle studs of the base should be covered, except for the last row of studs on your left.
-
Attach one brown 2×3 brick to the two remaining open middle studs on the left. There should now be an overhang of one stud on the right side of the base and an overhang of two studs on the left side of the base.
- From now on, the right side of the base will be referred to as the tail-end of your dog, while the left side of the base will be referred to as the front-end of your dog.
-
5
Flip your base over. On the underside of your base, attach two brown 2×2 bricks to the bottom of the base. These should be positioned so they’re attached directly in the center of your base, elevating it.[3]
Advertisement
-
Flip your base right side up. Attach two brown 1×2 bricks, laid horizontally, to the last two studs on the tail end of your dog. Connect those bricks by laying one black 1×2 brick vertically over the last two studs on the right.
-
Take a brown 1×2 brick, a black 1×2 brick and a brown 1×1 brick. Position the brown 1×1 brick to the right of the black 1×2 brick, creating a straight line. Position the brown 1×2 brick across both bricks to connect them.[4]
- Repeat this step four times, so you have constructed four identical legs.
-
3
Attach the dog’s legs. Position all four legs so they are attached to the bottom of the base in all four corners. Each of the black “feet” should be facing the front end of your dog.[5]
Advertisement
-
Get a brown 2×4 brick and a black 2×2 brick. Place the black brick on top of the brown brick and attach it to the first row of studs on the left hand side.[6]
- This black brick will serve as your dog’s nose.
-
Add one brown 1×2 brick, laid vertically, directly behind the dog’s nose. Then add a brown 1×4 brick, laid vertically, behind that. Attach two white 1×1 bricks to the top of the brown 1×2 brick.
- These white bricks will serve as your dog’s eyes.
- If you’re looking for more realistic eyes for your dog, you can buy these separately. Dog eyes can be found in the LEGO classic small box, available online and in stores.[7]
-
In back of the eyes, add one brown 1×2 brick. Position two brown 1×1 bricks on either side of your brown 1×2 brick. These will serve as your dog’s ears.
-
4
Attach the head. Take the head so the dog’s nose is facing towards the front of the room and attach it to the front-end of your dog. The head should be positioned squarely on top of the 2×4 brick on the left side of your dog.[8]
Advertisement
-
Now that the work is completed, it’s time to have fun with your dog. Give them a name and build them a park to play in. If you have extra pieces, build another dog, so they have a companion to play with.
-
A LEGO dog is just the beginning. Challenge yourself by building other LEGO creatures. Try building a cat or an elephant or any other animal you can think of.
-
Once you feel confident with your LEGO dog making skills, try building a LEGO house. For instructions on how to build a LEGO house, try going here.
Advertisement
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
-
Try working on a flat surface, like a table or the floor. This will allow you the stability to build and will also keep your project from falling over while you work.
-
If you don’t have the correct colors for your dog, don’t worry! It’s your dog and they can be any color you’d like them to be.
Thanks for submitting a tip for review!
Advertisement
-
LEGOs can be a choking hazard for young children. Do not let infants or babies play with LEGOs unsupervised (unless they’re playing with LEGOs designed for that particular age group.)[9]
Advertisement
Things You’ll Need
- LEGO Blocks
References
About This Article
Thanks to all authors for creating a page that has been read 91,174 times.
Reader Success Stories
-
Gretel Stone
Apr 28, 2022
«How to build a better Lego dog.»
Did this article help you?
- Privacy policy
- Cookies
- Legal notice
- Terms of use
- Digital wellbeing
- Accessibility
LEGO System A/S, DK-7190 Billund, Denmark. Must be 18 years or older to purchase online. LEGO, the LEGO logo, the Minifigure, DUPLO, the FRIENDS logo, the MINIFIGURES logo, DREAMZzz, NINJAGO, VIDIYO and MINDSTORMS are trademarks of the LEGO Group. ©2025 The LEGO Group. All rights reserved. Use of this site signifies your agreement to the Terms of Use.
Инструкции по сборке LEGO Creator Конструктор Очаровательные собаки 31137
Воспользуйтесь поиском по артикулу
Или найдите нужную иструкцию по серии и теме
31137
По запросу 31137 найдено
Creator 31137
Конструктор Очаровательные собаки
Здесь вы найдете пошаговую инструкцию и схемы сборки, а также вы сможете скачать файл в pdf при необходимости.
В зависимости от модели, количества деталей и выбранного языка, вы без труда найдете необходимую инструкцию.
Даже если вы приобрели модель давно, и забыли, что и как использовать при сборке — у нас на сайте вы найдете необходимую информацию обо всех моделях конструктора лего.
Вбейте в строке поиска интересующий вас артикул или воспользуйтесь поиском по серии или теме.
Где мой заказ?
Введите номер заказа и номер телефона получателя, чтобы узнать где ваш заказ
Заказ № 1-123-12345
Сообщение о статусе заказа
Сообщение о статусе заказа
Способ доставки:
Доставка
Адрес доставки:
Москва, 6-я парковая, 7к3, 2
Стоимость доставки:
Бесплатно
Способ оплаты:
Наличными при получении
Отследить статус заказа можно на сайте транспортной компании.
Отследить
Если ссылка не открывается, скопируйте её в браузерную строку:
https://mir-kubikov.ru/order/delivery/
Авторизуйтесь, если часто покупаете у нас, чтобы видеть статус всех своих заказов в личном кабинете
Выберите город
Москва и область Санкт-Петербург и ЛОВладивостокВоронежЕкатеринбургИркутскКазань
КраснодарНижний НовгородНовосибирскОмскРостов-на-ДонуСамараСочи
СургутТюменьУфаЧелябинскЯрославль
Название проекта: Робот-щенок (Puppy) из LEGO Education Mindstorms EV3
Платформа: LEGO Mindstorms
Робот-щенок — стандартная модель, разработанная специалистами LEGO Education.
Инструкция по сборке.
Использованные компоненты: базовый набор LEGO Mindstorms Education EV3, артикул 45544
Сайт проекта: http://robotsquare.com/2013/10/01/education-ev3-45544-instruction/
Другие проекты на этой платформе:
- Двуногий робот из Arduino, LEGO и деталей 3D печати
- LEGO EV3 робот-художник
- SpinnerBot из LEGO Mindstorms
- LegoGun — двуствольный пистолет из Lego Mindstorms EV3
- Спирограф — рисующий робот из LEGO Mindstorms EV3
- Бесполезная коробка из Lego Mindstoms EV3
- Гексапод из Lego Mindstorms EV3
- Роботизированная рука из Lego Mindstorms EV3
- Подъемные механизмы из LEGO Mindstorms
- Прибор автоматической подачи одноразовых стаканчиков из LEGO Mindstorms
- Робот-кабан-динозавр DINOR3X из LEGO Mindstorms EV3
- Znap — робот из LEGO Mindstorms EV3
- Робот-сортировщик (Color Sorter) из LEGO Mindstorms EV3
- Робот Educator Vehicle из LEGO Mindstorms EV3
- Робот-сигвей (Gyro Boy) из Lego Mindstorms
- Робот-манипулятор Arm H25 из LEGO Mindstorms
- Робот-гексапод NXTAPOD из LEGO Mindstorms. Модель Даниэля Бенедеттелли
- Лимоноид — робот, продающий напитки
- Киноаппарат из Lego Mindstorms
- Принтер из Lego Mindstorms «STALKER ver. 2.0»
- Робот-пожарный из LEGO Mindstorms
- Крестики-нолики — ARBUZIKI-TEAM
- EZ Wilber — говорящий балансирующий робот из Lego Mindstorms
- Ev3 Print3rbot — робот-художник из Lego Mindstorms
- 3D-принтер из Lego печатает шоколадом
- Lego Mindstorms NXT 2.0 играет в шахматы
- Робот-гексапод из Lego Mindstorms NXT 2.0
- Робоноги из Lego Mindstorms
- Lego Mindstorms-экскаватор, управляемый Microsoft Kinect
- Lego-робот DIZZ3
- Крестики-нолики для Lego-робота
- Lego Mindstorms EV3 3D-принтер 2.0
Перейти в каталог DIY-проектов роботов
Как добавить робопроект в каталог?
Теги: Lego Education, Lego Mindstorms, инструкция