Kia rio 2014 инструкция

Kia, THE COMPANY

Thank you for becoming the owner of a new Kia vehicle.

As a global car manufacturer focused on building high-quality, value
for money prices, Kia Motors is dedicated to providing you with a
customer service experience that exceeds your expectations.

All information contained in this Owner’s Manual is accurate at the
time of publication. However, Kia reserves the right to make changes
at any time so that our policy of continual product improvement can
be carried out.

This manual applies to all Kia models and includes descriptions and
explanations of optional as well as standard equipment. As a result,
you may encounter material in this manual that is not applicable to
your specific Kia vehicle.

Drive safely and enjoy your Kia!

i

Thank you for choosing a Kia vehicle.
When you require service, remember that your Kia Dealer

knows your vehicle best. Your dealer has factory-trained tech­nicians, recommended special tools, genuine Kia replacement
parts and is dedicated to your complete satisfaction.

Because subsequent owners require this important information
as well, this publication should remain with the vehicle if it is
sold.

This manual will familiarize you with operational, mainte­nance and safety information about your new vehicle. It is sup­plemented by a Warranty and Consumer Information manual
that provides important information on all warranties regarding
your vehicle.

We urge you to read these publications carefully and follow the
recommendations to help assure enjoyable and safe operation
of your new vehicle.

Kia offers a great variety of options, components and features
for its various models. Therefore, some of the equipment
described in this manual, along with the various illustrations,
may not be applicable to your particular vehicle.

The information and specifications provided in this manual
were accurate at the time of printing. Kia reserves the right to
discontinue or change specifications or design at any time
without notice and without incurring any obligation. If you
have questions, always check with your Kia dealer.

We assure you of our continuing interest in your motoring
pleasure and satisfaction in your Kia vehicle.

© 2014 Kia Canada Inc.
All rights reserved. Reproduction by any means, electronic or

mechanical, including photocopying, recording, or by any
information storage and retrieval system or translation in
whole or part is not permitted without written authorization
from Kia Canada Inc..

Printed in Korea

Foreword

ii

1

2

3

4

5

6

7

Introduction
Your vehicle at a glance
Safety features of your vehicle
Features of your vehicle
Driving your vehicle
What to do in an emergency
Maintenance

table of contents

8

I

Specifications & Consumer information

Index

1

How to use this manual / 1-2
Fuel requirements / 1-3
Vehicle break-in process / 1-4
Indicator symbols on the instrument cluster / 1-5

Introduction

Introduction

21

We want to help you get the greatest
possible driving pleasure from your vehi­cle.Your Owner’s Manual can assist you
in many ways. We strongly recommend
that you read the entire manual. In order
to minimize the chance of death or injury ,
you must read the WARNING and CAU­TION sections in the manual.

Illustrations complement the words in this
manual to best explain how to enjoy your
vehicle.By reading your manual, you will
learn about features, important safety
information, and driving tips under vari­ous road conditions.

The general layout of the manual is pro­vided in the Table of Contents. Use the
index when looking for a specific area or
subject;it has an alphabetical listing of all
information in your manual.

Sections:This manual has eight sections
plus an index.Each section begins with a
brief list of contents so you can tell at a
glance if that section has the information
you want.

You will find various types of safety
instructions in this manual. These
instructions were prepared to enhance
your personal safety. Carefully read and
follow ALL procedures and recommen­dations provided in these instructions.

✽✽

NOTICE

A NOTICE indicates interesting or help­ful information is being provided.

HOW T O USE THIS MANUAL

WARNING

A WARNING indicates a situation in
which harm, serious bodily injury or
death could result if the warning is
ignored.

CAUTION

A CAUTION indicates a situation in
which damage to your vehicle could
result if the caution is ignored.

13

Introduction

Your new Kia vehicle is designed to use
only unleaded fuel having a pump octane
number ((R+M)/2) of 87 (Research
Octane Number 91) or higher.

Your new vehicle is designed to obtain
maximum performance with UNLEADED
FUEL, as well as minimize exhaust emis­sions and spark plug fouling.

Never add any fuel system cleaning
agents to the fuel tank other than what
has been specified. (Consult an author­ized Kia dealer for details.)

✽✽

NOTICE

Tighten the cap until it clicks one time,
otherwise the fuel cap open warning
indicator will illuminate.

Gasoline containing alcohol and
methanol

Gasohol, a mixture of gasoline and
ethanol (also known as grain alcohol),
and gasoline or gasohol containing
methanol (also known as wood alcohol)
are being marketed along with or instead
of leaded or unleaded gasoline.

Pursuant to EPA regulations, ethanol
may be used in your vehicle. Do not use
gasohol containing more than 10%
ethanol, and do not use gasoline or
gasohol containing any methanol.
Ethanol provides less energy than gaso­line and it attracts water, and it is thus
likely to reduce your fuel efficiency and
could lower your MPG results. Methanol
may cause drivability problems and dam­age to the fuel system.Discontinue using
gasohol of any kind if drivability problems
occur.V ehicle damage or drivability prob­lems may not be covered by the manu­facturer’s warranty if they result from the
use of:

1.Gasoline or gasohol containing
methanol.

2. Leaded fuel or leaded gasohol.

«E85» fuel is an alternative fuel com­prised of 85 percent ethanol and 15 per­cent gasoline, and is manufactured
exclusively for use in Flexible Fuel
Vehicles. “E85” is not compatible with
your vehicle. Use of “E85” may result in
poor engine performance and damage to
your vehicle’s engine and fuel system.
Kia recommends that customers do not
use fuel with an ethanol content exceed­ing 10 percent.

✽✽

NOTICE

Your New Vehicle Limited Warranty
does not cover damage to the fuel system
or any performance problems caused by
the use of “E85” fuel.

Gasoline containing MMT

Some gasoline contains harmful man­ganese-based fuel additives such as
MMT (Methylcyclopentadi-enyl
Manganese Tricarbonyl).

Kia does not recommend the use of
gasoline containing MMT.

This type of fuel can reduce vehicle per­formance and affect your emission con­trol system.

The malfunction indicator lamp on the
cluster may come on.

FUEL REQUIREMENTS

WARNING — Refueling

• Do not «top off» after the nozzle
automatically shuts off when
refueling.

• Always check that the fuel cap is
installed securely to prevent fuel
spillage in the event of an acci­dent.

Introduction

41

Use of MTBE

Kia recommends avoiding fuels contain­ing MTBE (Methyl Tertiary Butyl Ether)
over 15.0% vol. (Oxygen Content 2.7%
weight) in your vehicle.

Fuel containing MTBE over 15.0% vol.
(Oxygen Content 2.7% weight) may
reduce vehicle performance and produce
vapor lock or hard starting.

✽✽

NOTICE

Your New Vehicle Limited Warranty
may not cover damage to the fuel system
and any performance problems that are
caused by the use of fuels containing
methanol or fuels containing MTBE
(Methyl Tertiary Butyl Ether) over

15.0% vol. (Oxygen Content 2.7%
weight.)

Do not use methanol

Fuels containing methanol (wood alco­hol) should not be used in your vehicle.
This type of fuel can reduce vehicle per­formance and damage components of
the fuel system.

Fuel Additives

Kia recommends that you use good qual­ity gasolines treated with detergent addi­tives such as TOP TIER Detergent
Gasoline, which help prevent deposit for­mation in the engine. These gasolines
will help the engine run cleaner and
enhance performance of the Emission
Control System. For more information on
TOP TIER Detergent Gasoline, please
go to the website (www

.toptiergas.com).

For customers who do not use TOP Tier
Detergent Gasoline regularly, and have
problems starting or the engine does not
run smoothly, additives that you can buy
separately may be added to the gasoline.
If TOP TIER Detergent Gasoline is not
available, one bottle of additive added to
the fuel tank at every 12,000 km or every
engine oil change is recommended.
Additives are available from your author­ized Kia dealer along with information on
how to use them. Do not mix other addi­tives.

Operation in foreign countries

If you are going to drive your vehicle in
another country, be sure to:

• Obser ve all regulations regarding reg­istration and insurance.

• Determine that acceptable fuel is avail­able.

No special break-in period is needed. By
following a f e w simple precautions for the
first 1,000 km (600 miles) you may add to
the performance, economy and life of
your vehicle.

• Do not race the engine.

• While dr iving, keep your engine speed
(rpm, or revolutions per minute)
between 2,000 rpm and 4,000 rpm.

• Do not maintain a single speed for long
periods of time, either fast or slow.
Varying engine speed is needed to
properly break-in the engine.

• Avoid hard stops, except in emergen­cies, to allow the brakes to seat prop­erly.

• Don’t tow a trailer during the first 2,000
km (1,200 miles) of operation.

VEHICLE BREAK-IN PROCESS

15

Introduction

INDICATOR SYMBOLS ON THE INSTRUMENT CLUSTER

Seat belt warning light

High beam indicator

Tur n signal indicator

ABS warning light

Parking brake & Brake fluid
warning light

Engine oil pressure warning light

ESC indicator

ESC OFF indicator

Malfunction indicator light

Air bag warning light

Immobilizer indicator

Low fuel level warning light

* : if equipped

Charging system warning light

Tail light indicator

Trunk (tailgate) open ajar war n­ing light

Front fog light indicator*

Electric power steering (EPS)
system warning light*

Door ajar warning light

Shift pattern indicator*

Manual transaxle shift indicator*

Key out warning light*

KEY
OUT

ECO indicator*

ECO

Auto stop for ISG system
indicator*

❈ For more detailed explanations, refer to “Instrument cluster” in section 4.

Low tire pressure telltale* /
TPMS malfunction indicator*

Cruise SET indicator*

Cruise control indicator*

CRUISE

Fuel cap open warning indicator

2

Interior overview / 2-2
Instrument panel overview / 2-3
Engine compartment / 2-4

Your vehicle at a glance

Your vehicle at a glance

22

INTERIOR OVERVIEW

OUB021001K

1. Door lock/unlock button ………………..4-16

2. Central door lock switch………………..4-17

3. Power window switches ………………..4-22

4. Power window lock button…………….4-25

5. Outside rearview mirror control

switch…………………………………………4-39

6. Hood release lever……………………….4-26

7. Fuel filler lid release lever ……………..4-28

8.Trunk lid release lever (4 door)………4-18

9. Steering wheel…………………………….4-35

10. Steering wheel tilt control lever…….4-36

11. Active ECO button ……………………..5-41

12. Instrument panel illumination control

switch……………………………………….4-42

13. ESC OFF button ………………………..5-25

14. Heated steering wheel switch

(if equipped) ………………………………4-36

15. Idle Stop and Go system OFF button

………………………………………………..5-37

16. Fuse box…………………………………..7-49

17. Brake pedal……………………………….5-21

18. Accelerator pedal

❈ The actual interior in the vehicle may differ from the illustration.

23

Your vehicle at a glance

INSTRUMENT PANEL OVERVIEW

OUB021002N

1. Instrument cluster………………………..4-41

2. Horn ………………………………………….4-37

3. Driver’s front air bag…………………….3-41

4. Light control/Turn signals……………..4-70

5.Wiper/Washer……………………………..4-74

6. Ignition switch or ENGINE START/

STOP button……………………………5-4, 5-6

7. Hazard warning flasher switch……4-70, 6-2

8. Audio……………………………………….4-102

9. Climate control system …………………4-81

10. Shift lever………………………….5-12, 5-15

11. Steering wheel audio control……..4-103

12. Passenger’s front air bag……………3-41

13. Glove box…………………………………4-92

14. Parking brake lever……………………5-22

15. Power outlet ……………………………..4-99

16. Cigarette lighter …………………………4-96

17. Seat warmer ……………………………….3-7

❈ The actual instrument panel in the vehicle may differ from the illustration.

Your vehicle at a glance

42

ENGINE COMPARTMENT

OUB071103N

* The actual engine compartment in the vehicle may differ from the illustration.

1. Engine Coolant Reservoir…………….7-26

2. Engine Oil Filler Cap……………………7-25

3. Brake/Clutch Fluid Reservoir ………..7-29

4. Air Cleaner …………………………………7-31

5. Fuse Box……………………………………7-49

6. Negative Battery Ter minal…………….7-34

7. Positive Battery Terminal………………7-34

8. Radiator Cap………………………………7-27

9. Engine Oil Dipstick………………………7-25

10.Windshield Washer Fluid Reservoir..7-30

3

Seat / 3-2
Seat belts / 3-12
Child restraint system / 3-22
Airbag-advanced supplemental restraint system / 3-30

Safety features of your vehicle

Safety features of your vehicle

23

Driver’s seat

(1) Forward and rearward
(2) Seatback angle
(3) Seat cushion height
(4) Seat warmer
(5) Headrest

Front passenger’s seat

(6) Forward and rearward
(7) Seatback angle
(8) Seat warmer
(9) Headrest

Rear seat

(10) Headrest
(11) Seatback folding

SEAT

OUB032001K

■ 5 door

■ 4 door

❈ The actual seats in the vehicle may differ from the illustration.

33

Safety features of your vehicle

WARNING — Driver’s seat

• Never attempt to adjust the seat
while the vehicle is moving. This
could result in loss of control of
your vehicle.

• Do not allow anything to interfere
with the normal position of the
seatback. Storing items against a
seatback or in any other way
interfering with proper locking of
a seatback.

• Sit as far back as possible from
the steering wheel while still
maintaining comfortable control
of your vehicle. A distance of at
least 10″ from your chest to the
steering wheel is recommended.
Failure to do so can result in
airbag inflation injuries to the
driver.

WARNING — Uprighting

seat

Do not press the release lever on a
manual seatback without holding
and controlling the seatback. The
seatback will spring upright possi­bly impacting you or other passen­gers.

WARNING — Loose objects

Do not place anything in the dri­ver’s foot well or under the front
seats. Loose objects in the driver’s
foot area could interfere with the
operation of the foot pedals.

WARNING — Driver respon-

sibility for passengers

The driver must advise the passen­ger to keep the seatback in an
upright position whenever the vehi­cle is in motion. If a seat is reclined
during an accident, the occupant’s
hips may slide under the lap por­tion of the seat belt, applying great
force to the unprotected abdomen.

WARNING— Seat cushion

Occupants should never sit on seat
cushions. The passenger’s hips
may slide under the lap portion of
the seat belt during an accident or
a sudden stop.

WARNING — Seat

adjustment

• Do not adjust the seat while wear­ing seat belts. Moving the seat
forward will cause strong pres­sure on the abdomen.

• Do not place your hand near the
seat bottom or seat track while
adjusting the seat. Your hand
could get caught in the seat
mechanism.

Safety features of your vehicle

43

Front seat adjustment

Forward and backward

To move the seat forward or backward:

1. Pull the seat slide adjustment lever up
and hold it.

2. Slide the seat to the position you
desire.

3. Release the lever and make sure the
seat is locked in place.

Adjust the seat before driving, and make
sure the seat is locked securely by trying
to move forward and backward without
using the lever. If the seat moves, it is not
locked properly.

Seatback angle

To recline the seatback:

1. Lean forward slightly and lift up the
seatback recline lever.

2. Carefully lean back on the seat and
adjust the seatback of the seat to the
position you desire.

3. Release the lever and make sure the
seatback is locked in place. (The lever
MUST return to its original position for
the seatback to lock.)

OUB031002

WARNING — Unexpected

seat movement

After adjusting a manual seat,
always check that it is locked by
shifting your weight to the front and
back. Sudden or unexpected move­ment of the driver’s seat could
cause you to lose control of the
vehicle.

OUB031003

35

Safety features of your vehicle

Seat height (for driver’s seat)
(if equipped)

To change the height of the seat, move
the lever upwards or downwards.

• To lower the seat cushion, push down
the lever several times.

• To raise the seat cushion, pull up the
lever several times.

Headrest

The driver’s and front passenger’s seats
are equipped with a headrest for the
occupant’s safety and comfort.

The headrest not only provides comfort
for the driver and front passenger, but
also helps protect the head and neck in
the event of a collision.

For maximum effectiveness in case of an
accident, the headrest should be adjust­ed so the middle of the headrest is at the
same height of the center of gravity of an
occupant’s head. Generally, the center of
gravity of most people’s head is similar
with the height of the top of their eyes.
Also, adjust the headrest as close to your
head as possible.

For this reason, the use of a cushion that
holds the body away from the seatbac k is
not recommended.

OUB031004 OUB031042N

WARNING — Headrest

removal/adjustment

• Do not operate the vehicle with
the headrests removed.
Headrests can provide critical
neck and head support in a
crash.

• Do not adjust the headrest height
while the vehicle is in motion.
Driver may lose control of the
vehicle.

Safety features of your vehicle

63

Forward and backward adjustment

The headrest may be adjusted forw ard to
4 different positions by pulling the head­rest forward to the desired detent. To
adjust the headrest to it’s furthest back­wards position, pull it fully forward to the
farthest position and release it.Adjust the
headrest so that it properly supports the
head and neck.

Adjusting the height up and down

To raise the headrest, pull it up to the
desired position (1). To lower the head­rest, push and hold the release button (2)
on the headrest support and lower the
headrest to the desired position (3).

Removal and installation

To remove the headrest:

1.Recline the seatback (2) with the
recline lever (1).

2. Raise headrest as far as it can go.

3. Press the headrest release button (3)
while pulling the headrest up (4).

OUB031005OUB031007

WARNING

NEVER allow anyone to ride in a
seat with the headrest removed.

OUB034100

37

Safety features of your vehicle

To reinstall the headrest :

1. Put the headrest poles (2) into the holes
while pressing the release button (1).

2.Recline the seatback (4) with the
recline lever (3).

3. Adjust the headrest to the appropriate
height.

Seat warmer (if equipped)

The seat warmers are provided to warm
the front seats during cold weather.With
the ignition switch in the ON position,
push either of the switches to warm the
driver’s seat or the front passenger’s
seat.

During mild weather or under conditions
where the operation of the seat warmer
is not needed, keep the switches in the
OFF position.

With the seat warmer switch in the ON
position, the heating system in the seat
turns off or on automatically depending
on the seat temperature.

OUB031008

CAUTION — Seat damage

• When cleaning the seats, do not
use an organic solvent such as
paint thinner, benzene, alcohol
and gasoline. Doing so may dam­age the surface of the heater or
seats.

• To prevent overheating the seat
warmer, do not place anything on
the seats that insulates against
heat, such as blankets, cushions
or seat covers while the seat
warmer is in operation.

• Do not place heavy or sharp
objects on seats equipped with
seat warmers. Damage to the seat
warming components could
occur.

WARNING

Always make sure the headrest
locks into position after reinstalling
and adjusting it properly.

OUB034101

Safety features of your vehicle

83

Seatback pocket

The seatback pocket is provided on the
back of the front passenger’s seatback.

Rear seat adjustment

Headrest

The rear seat is equipped with headrests
in all the seating positions for the occu­pant’s safety and comfort.

The headrest not only provides comfort
for passengers, but also helps protect the
head and neck in the event of a collision.

For maximum effectiveness in case of an
accident, the headrest should be adjust­ed so the middle of the headrest is at the
same height of the center of gravity of an
occupant’s head. Generally, the center of
gravity of most people’s head is similar
with the height as the top of their eyes.

WARNING — Seat warmer

burns

Passengers should use extreme
caution when using seat warmers
due to the possibility of excess
heating or burns. The occupants
must be able to feel if the seat is
becoming too warm and to turn the
seat warmer off. The seat warmer
may cause burns even at low tem­peratures, especially if used for
long periods of time.

In particular, the driver must exer­cise extreme care for the following
types of passengers:

1. Infants, children, elderly or dis­abled persons, or hospital outpa­tients

2. Persons with sensitive skin or
those that burn easily

3. Fatigued individuals

4. Intoxicated individuals

5. Individuals taking medication
that can cause drowsiness or
sleepiness (sleeping pills, cold
tablets, etc.)

WARNING — Seatback

pocket

Do not put heavy or sharp objects
in the seatback pocket. An occu­pant could contact such objects in
a crash. Heavy objects in the front
passenger seatback could also
interfere with the airbag sensing
system.

OUB031009 OUB031043N

39

Safety features of your vehicle

Also adjust the headrest as close to your
head as possible. For this reason, the
use of a cushion that holds the body
away from the seatback is not recom­mended.

Adjusting the height up and down
(if equipped)

To raise the headrest, pull it up to the
desired position (1). To lower the head­rest, push and hold the release button (2)
on the headrest support and lower the
headrest to the desired position (3).

Removal and installation

To remove the headrest, raise it as far as
it can go then press the release button
(1) while pulling the headrest upward (2).

To reinstall the headrest, put the head­rest poles (3) into the holes while press­ing the release button (1). Then adjust it
to the appropriate height and ensure that
it locks in position.

Make sure the headrest locks in position
after adjusting.

WARNING — Headrest

removal

Do not operate the vehicle with the
headrests removed. Headrests can
provide critical neck and head sup­port in a crash.

OUB031016N OUB031017N

Safety features of your vehicle

103

Folding the rear seat

The rear seatbacks may be folded to
facilitate carrying long items or to
increase the luggage capacity of the
vehicle.

To fold down the rear seatback:

• 4 door

1. Make sure the rear seat belt webbing
is in the guide to prevent the seat belt
from being damaged.

2. Set the front seatback to the upright
position and if necessary, slide the
front seat forward.

3. Lower the rear headrests to the lowest
position.

4. Pull the lock release lever (1) and fold
the rear seatback forward and down
firmly.

If the seat belt remains extended after
returning the seatback to it’s upright
position, pull the seatbelt outward and
release to retract the seatbelt.

WARNING

Never allow passengers sit on top
of the folded down seatback while
the vehicle is moving.This is not a
proper seating position and no seat
belts are available for use. This
could result in serious injury or
death in case of an accident or sud­den stop.

WARNING — Objects

Objects carried on the folded down
seatback should not extend higher
than the top of the front seatbacks.
This could allow cargo to slide for­ward and cause injury or damage
during sudden stops.

OUB031049K OUB031051K

311

Safety features of your vehicle

• 5 door

1. Make sure the rear seat belt webbing
is in the guide to prevent the seat belt
from being damaged.

2.Set the front seatback to the upright
position and if necessary, slide the
front seat forward.

3.Lower the rear headrests to lowest
position.

4. Pull the lock release lever (1) and fold
the rear seatback forward and down
firmly.

If the seat belt locks after unfolding the
rear seatback, pull out the locked seat
belt, release it then pull it out again.

To unfold the rear seat

1. To use the rear seat, lift and pull the
seatback backward. Pull the seatback
firmly until it clicks into place. Make
sure the seatback is locked in place.
When you return the seatback to its
upright position, always be sure it has
locked into position by pushing on the
top of the seatback.

If you can not see the red line at the
bottom of folding lever, it means the
seatback is locked completely.

2. Retur n the rear seat belt to the proper
position.

3.When the seatback is completely
installed, check the seatback folding
lever again.

When returning the rear seatbacks to the
upright position, remember to return the
rear shoulder belts to their proper posi­tion.

OUB032049 OUB032018N

Safety features of your vehicle

123

Seat belt restraint system

Seat belts are designed to bear upon the
bony structure of the body, and should
be worn low across the front of the pelvis
or the pelvis, chest and shoulders, as
applicable; wearing the lap section of the
belt across the abdominal area must be
avoided.

Seat belts should be adjusted as firmly
as possible, consistent with comfort, to
provide the protection for which they
have been designed.

A slack belt will greatly reduce the pro­tection afforded to the wearer.

Care should be taken to avoid contami­nation of the webbing with polishes, oils
and chemicals, and particularly battery
acid. Cleaning may safely be carried out
using mild soap and water. The belt
should be replaced if webbing becomes
frayed, contaminated or damaged.

• For maximum restraint system protec­tion, the seat belts must always be
used whenever the vehicle is moving.
A properly positioned shoulder belt
should be positioned midway ov er your
shoulder across your collarbone.

• Never allow children to ride in the front
passenger seat. See child restraint
system section for further discussion.

WARNING — Shoulder belt

Never wear the shoulder belt under
your arm or behind your back. An
improperly positioned shoulder
belt cannot protect the occupant in
a crash.

WARNING — Damaged seat

belt

Replace the entire seat belt assem­bly if any part of the webbing or
hardware is damage as you can no
longer be sure that a damage seat
belt will provide protection in a
crash.

WARNING — Rear seatback

When returning the rear seatback
from a folded to an upright posi­tion, hold the seatback and return it
slowly. Ensure that the seatback is
completely locked into its upright
position by pushing on the top of
the seatback. In an accident or sud­den stop, the unlocked seatback
could allow cargo to move forward
with great force and enter the pas­senger compartment.

WARNING — Cargo

Do not place heavy objects in the
rear seats, since they cannot be
properly secured and may hit vehi­cle occupants in a frontal collision.

SEAT BELTS

313

Safety features of your vehicle

Seat belt warning (for driver’s seat)

The driver’s seat belt warning light and
chime will activate to the following table
when the ignition switch is in «ON» posi­tion.

*

1

Warning pattern repeats 11 times with
an interval of 24 seconds.If the driver’s
seat belt is buckled, the light will stop
within 6 seconds and chime will stop
immediately.

*

2

The light will stop within 6 seconds and
chime will stop immediately.

1GQA2083

WARNING — Twisted seat

belt

Make sure your seat belt is not
twisted when worn. A twisted seat
belt may not properly pr otect y ou in
an accident and could even cut into
your body.

WARNING — Seat belt

buckle

Do not allow foreign material (gum,
crumbs, coins, etc.) to obstruct the
seat belt buckle. This may prevent
the seat belt from fastening secure­ly.

Conditions Warning Pattern

Seat Belt

Vehicle

Speed

Light-Blink

Chime-

Sound

Unbuckled 6 seconds

Buckled 6 seconds None

Buckled →

Unbuckled

Below 5 km/h

(3 mph)

6 seconds None

5 km/h~
10 km/h

6 seconds

Above 10 km/h

(6 mph)

6 sec. on / 24 sec. off

(11 times)

Unbuckled

Abo v e 10 km/h

(6 mph)

↓

Below 5 km/h

(3 mph)

6 seconds *

1

↓

Stop *

2

Safety features of your vehicle

143

Seat belt warning (for front passen­ger’s seat)

The front passenger’s seat belt warning
light will activate to the following table
when the ignition switch is in «ON» posi­tion.

*

1

The seat belt warning light will go off if
the vehicle speed decreases below 5
km/h (3 mph). If the vehicle speed
increases above 5 km/h (3 mph), the
warning light will blink again.

• You can find the front passenger’s seat
belt warning light on the center fascia
panel.

• Although the front passenger seat is
not occupied, the seat belt warning
light will blink for 6 seconds.

• The seat belt warning light can blink
when a briefcase or purse is placed on
the front passenger seat.

Conditions Warning Pattern

Seat Belt

Vehicle

Speed

Light-Blink

Unbuckled 6 seconds

Unbuckled

Above 10 km/h

(6mph)

Continuously

Buckled 6 seconds

Buckled →
Unbuckled

Above 10 km/h

(6mph)

Continuously *

1

Below 10 km/h

(6mph)

None

OUB034014N

WARNING

Riding in an improper position
adversely affects the front passen­ger’s seat belt warning system. It is
important for the driver to instruct
the passenger as to the proper
seating instructions as contained
in this manual.

315

Safety features of your vehicle

Seat belt — Driver’s 3-point system
with emergency locking retractor

To fasten your seat belt:

To fasten your seat belt, pull it out of the
retractor and insert the metal tab (1) into
the buckle (2). There will be an audible
«click» when the tab locks into the buc kle.

The seat belt automatically adjusts to the
proper length only after the lap belt por­tion is adjusted manually so that it fits
snugly around your hips. If you lean for­ward in a slow, easy motion, the belt will
extend and let you move around. If there
is a sudden stop or impact, however, the
belt will lock into position. It will also lock
if you try to lean forward too quickly.

If you are not able to pull out the seat belt
from the retractor, firmly pull the belt out
and release it. Then you will be able to
pull the belt out smoothly.

Height adjustment

You can adjust the height of the shoulder
belt anchor to one of the 4 positions for
maximum comfort and safety.

The height of the adjusting seat belt
should not be too close to your neck. The
shoulder portion should be adjusted so
that it lies across your chest and midway
over your shoulder near the door and not
your neck.

To adjust the height of the seat belt
anchor, lower or raise the height adjuster
into an appropriate position.

OTA030017

Front seat

B180A01NF-1

Safety features of your vehicle

163

To raise the height adjuster, pull it up (1).
To lower it, push it down (3) while press­ing the height adjuster button (2).

Release the button to lock the anchor
into position. Try sliding the height
adjuster to make sure that it has locked
into position.

You should place the lap belt portion as
low as possible and snugly across your
hips. If the lap belt is located too high on
your waist, it may increase the chance of
injury in the event of a collision.

The arm closest to the seat belt buckle
should be over the belt while the other
arm should be under the belt as shown in
the illustration.

Seat belts — Front passenger and rear
seat 3-point system with combination
locking retractor

To fasten your seat belt:

Combination retractor type seat belts are
installed in the rear seat positions to help
accommodate the installation of child
restraint systems. Although a combina­tion retractor is also installed in the front
passenger seat position, it is strongly
recommended that children always be
seated in the rear seat. NEVER place
any infant restraint system in the front
seat of the vehicle.

This type of seat belt combines the fea­tures of both an emergency locking
retractor seat belt and an automatic lock­ing retractor seat belt.T o f asten y our seat
belt, pull it out of the retractor and insert
the metal tab into the buckle. There will
be an audible «click» when the tab locks
into the buckle. When not securing a
child restraint, the seat belt operates in
the same way as the driver’s seat belt
(Emergency Locking Retractor Type). It
automatically adjusts to the proper length
only after the lap belt portion of the seat
belt is adjusted manually so that it fits
snugly around your hips.

WARNING — Shoulder belt

position

Never position the shoulder belt
across your neck or face.

WARNING — Seat belt

replacement

Replace your seat belts after being
in an accident. Failure to replace
seat belts after an accident could
leave you with damaged seat belts
that will not provide protection in
the event of another collision.

B200A01NF

317

Safety features of your vehicle

When the seat belt is fully extended from
the retractor to allow the installation of a
child restraint system, the seat belt oper­ation changes to allow the belt to retract,
but not to extend (Automatic Locking
Retractor Type). Refer to “Using a child
restraint system” in this section.

To convert from the automatic locking
feature to the emergency locking opera­tion mode, allow the unbuckled seat belt
to fully retract.

When using the rear center seat belt, the
buckle with the “CENTER”mark must be
used.

To release the seat belt:

The seat belt is released by pressing the
release button (1) of the locking buckle.
When it is released, the belt should auto­matically draw back into the retractor.

If this does not happen, check the belt to
be sure it is not twisted, then try again.

B210A01NF-1

OUB031020N

Safety features of your vehicle

183

Pre-tensioner seat belt

Your vehicle is equipped with driver’s and
front passenger’s pre-tensioner seat
belts.The purpose of the pre-tensioner is
to make sure that the seat belts fit tightly
against the occupant’s body in certain
frontal collisions (or side collisions). The
pre-tensioner seat belts may be activated
in crashes, where the frontal collision is
severe enough.

When the vehicle stops suddenly, or if
the occupant tries to lean forward too
quickly, the seat belt retractor will lock
into position. In certain frontal collisions,
the pre-tensioner will activate and pull
the seat belt into tighter contact against
the occupant’s body.

If the system senses excessive seat belt
tension on the driver or passenger’s seat
belt when the pre-tensioner activates, the
load limiter inside the pre-tensioner will
release some of the pressure on the
affected seat belt.

The seat belt pre-tensioner system con­sists mainly of the following components.
Their locations are shown in the illustra­tion:

1. SRS air bag war ning light

2. Retractor pre-tensioner assembly

3. SRS control module

4. Anchor pre-tensioner assembly

1KMB3311A

OMG035300

Kia Rio (2014)

View the manual for the Kia Rio (2014) here, for free. This manual comes under the category cars and has been rated by 51 people with an average of a 8.8. This manual is available in the following languages: English. Do you have a question about the Kia Rio (2014) or do you need help?

Ask your question here

Index

Product Images (2)

Картинка с сайта: www.manuals.ca

Картинка с сайта: www.manuals.ca

Картинка с сайта: www.manuals.ca

Kia Rio (2014) specifications

Below you will find the product specifications and the manual specifications of the Kia Rio (2014).

The Kia Rio (2014) is a popular subcompact car that has been designed for urban driving. It is a practical and affordable option for those who want a reliable and efficient vehicle for their daily commute or short trips around the city. The exterior of the car features a modern and sleek design, with smooth lines and a low-slung profile that gives it a sporty look. The interior is functional and comfortable, with ample legroom for its size and a range of features that are designed to make the driving experience more enjoyable.

Under the hood, the Kia Rio (2014) is equipped with a 1.6-liter four-cylinder engine that delivers 138 horsepower and 123 lb-ft of torque. It can be paired with either a six-speed manual or six-speed automatic transmission, depending on your preference. The car is relatively fuel-efficient, with an EPA-estimated fuel economy of up to 28 mpg city and 37 mpg highway.

The Kia Rio (2014) comes in three different trims: LX, EX, and SX. The LX is the base model and comes with standard features such as air conditioning, satellite radio, and Bluetooth connectivity. The EX adds features such as a rearview camera, a touchscreen display, and a USB port, while the SX has a sport-tuned suspension, larger wheels, and a rear spoiler. It is also equipped with safety features such as anti-lock brakes, stability control, and front and side airbags.

Overall, the Kia Rio (2014) is a solid choice for those who want a practical, efficient, and reliable subcompact car that doesn’t compromise on style or features.

Questions & answers

Can’t find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Kia Rio (2014) below.

Is your question not listed? Ask your question here