Pioneer 190 ub инструкция

Картинка с сайта: manualmachine.com

DIGITAL MEDIA RECEIVER
RECEPTEUR NUMERIQUE MULTIMEDIA
RICEVITORE MULTIMEDIALE DIGITALE
RECEPTOR DIGITAL DE MEDIOS
DIGITALER MEDIA RECEIVER
DIGITALE MEDIA-RECEIVER
ЦИФРОВОЙ МЕДИАРЕСИВЕР

MVH-190UI
MVH-190UBG
MVH-190UB

English Français Italiano Español Deutsch Nederlands Русский

Owner’s Manual

Mode d’emploi

Manuale d’istruzioni

Manual de instrucciones

Bedienungsanleitung

Handleiding

Руководство пользователя

Картинка с сайта: manualmachine.com

Table of Contents

Before You Start ………………………………………………………………. 2

Getting Started ……………………………………………………………….. 3

Radio ……………………………………………………………………………….. 5

USB/iPod/AUX …………………………………………………………………. 6

App Mode………………………………………………………………………… 8

Spotify®……………………………………………………………………………. 8

Using Pioneer ARC APP……………………………………………………. 9

Settings………………………………………………………………………….. 10

FUNCTION settings ……………………………………………………… 10

AUDIO settings…………………………………………………………….. 11

SYSTEM settings ………………………………………………………….. 12

ILLUMINATION settings……………………………………………….. 13

Connections/Installation……………………………………………….. 14

Additional Information………………………………………………….. 17

• In the following instructions, a USB memory or USB audio player are referred

to as “USB device”.

• In this manual, iPod and iPhone are referred to as “iPod”.

Before You Start

Thank you for purchasing this PIONEER product

To ensure proper use, please read throug h this manual before using this produc t. It is
especially im portant that you read and observe WAR NING s and CAUTIONs in this manual.
Please keep the manual in a safe and accessible place for future reference.

If you want to dispose this produc t, do not mix it wi th general househo ld waste. There is a
separate collection system for used electronic products in accordance with legislation
that requires proper treatment, recovery and recycling.

Private households in the member states of the EU, in Switzerland and Norway may return
their used electronic products free of charge to designated collection facilities or to a
retailer (if yo u purchase a similar new one).
For countries not mentioned abov e, please contact your local a uthorities for the correct
method of di sposal.
By doing so you will ensure that your disposed product undergoes the necessary treatment,
recovery and recycling and thus prevent potential negative effects on the environment and
human health.

• Do not attempt to install or service this product by yourself. Installation or servicing
of this product by persons without training and experience in electronic equipment
and automot ive accessories may b e dangerous and coul d expose you to the ri sk of
electric shock, injury or other hazards.

• Do not attempt to operate the unit while driving. Make sure to pull off the road and park

your vehicle in a safe location before attempting to use the controls on the device.

• Do not allow this unit to come into contact with moisture and/or liquids. Electrical shock
could result. Also, damage to this unit, smoke, and overheating could result from contact
with liqui ds.

• Always keep the volume low enough to hear outside sounds.

• The Pioneer CarStereo-Pass is for use only in Germany.

2En

Картинка с сайта: manualmachine.com

• This product is evaluated in moderate and tropical climate condition under the Audio,

video and similar electronic apparatus — Safety requirements, IEC 60065.

If you experience problems

Should this unit fail to work properly, please contact your dealer or nearest authorized
PIONEER Service Station.

Getting Started

Basic operation

MVH-190UI/190UBG/190UB

Frequently used operations

Purpose Operation
Turn on the power* Press SR

C/OFF to turn on the power.

Press and hold SRC
power.

/OFF to turn o ff the

Purpose Operation

Adjust the volume Tur n the M.C. dial.

Select a source Press SR
Change the display information Pres s DI
Return to the previous display/lis t Press BAND/ .
Return to the normal di splay from the

menu

* When this unit’s blue/white lead is connected to the vehicle’s auto-antenna relay control

terminal, the vehicle’s antenna extends when this unit’s source is turned on. To retract the
antenna, turn the s ource off.

TE to mute the unit. Press

Press MU
MUTE again or turn the M.C. dial to
unmute.

C/OFF repeatedly.

SP repeated ly.

Press and hold BAND/ .

Display indication

Indication Description

Appears when a lower tier of the menu or folder exists.

Appears when the button is pressed.

Appears when the local seek tun ing function is set (page 11).

Appears when a traffic program is received.

Appears when the TA (traffic announcements) function is set

(page 11).
Appears when the sound retriever function is set (page 11).
Appears when the iPod control function is set (page 7) .

Detaching the front panel

Detach the front panel to prevent theft. Remove any cables and devices
attached to the front panel and turn off the unit before detaching it.

3En

Картинка с сайта: manualmachine.com

3 [QUIT :YES] appears when all the settings have been made.

To return to the first item of the setup menu, turn the M.
[QUIT :NO], then press to confirm.

C. dial to select

4 Press the M.C. dial to confirm the settings.

• You can cancel the menu setting by pressing SRC/OFF.

• These settings can be made at any time from the SYSTEM settings (page 12) and INITIAL

settings (page 4).

• Avoid subjecting the front panel to excessive shock.

• Keep the front panel out of direct sunlight and high temperatures.

• Always store the detached front panel in a protective case or bag.

Setup menu

When you turn the ignition switch to ON after installation, [SET UP :YES]
appears in the display.

1 Press the M.C. dial.

The setup menu disappears after 30 seconds of no operation. If you prefer
n

ot to set at this time, turn the M.C. dial to select [NO], then press to

confirm.

2 Turn the M.C. dial to select the options, then press to confirm.

To proceed to the next menu option, you need to confirm your selection.

Menu Item Description
LANGUAGE Select the language to display the text information from

[ENG](English),

](Russian),

[РУС
[TUR](Turkish)

CLOCK SET Set the clock.
FM STE P Select the FM tuning step from 100 kHz or 50 kHz.

[100], [50]

compressed audio file.

a

4En

Canceling the demonstration display (DEMO
OFF)

1 Press the M.C. dial to display the main menu.
2 Tur n th e M.C. dial to select [SYSTEM], then press to confirm.
3 Tur n th e M.C. dial to select [DEMO OFF], then press to confirm.
4 Tur n th e M.C. dial to select [YES], then press to confirm.

INITIAL settings

1 Press and hold SRC/OFF until the unit turns off.
2 Press and hold SRC/OFF to display the main menu.
3 Tur n th e M.C. dial to select [INITIAL], then press to confirm.
4 Tur n th e M.C. dial to select an option, then press to confirm.

The options var y depending on the unit.

Menu Item Description
FM STEP Select the FM tuning step from 100 kHz or 50 kHz.

[100], [50]

Картинка с сайта: manualmachine.com

Menu Item Description

SP-P/O MODE Select when there is a full-range speaker connected to

[REAR/SUB.W]

[SUB.W/SUB.W] Select when there is a passive subwoofer connected

[REAR/REAR] Select when there are full-range speakers connected to

S/W UPDATE Select to confirm the latest system information on the

[SYSTEM INFO]
[SYSTEM

DATE]

UP

SYSTEM RESET Select [YES] to initialize the unit settings. The unit will be

[YES], [NO]

the rear speaker output leads and there is a subwoofer
connected to the RCA output.

directly to the rear speaker output leads and there is a
subwoofer connected to the RCA output.

e rear speaker output leads and RCA output. If the re is

th
a full-range speaker connected to the rear speaker
output leads, and the RCA output is not used, you may
select either [REAR/SUB.W] or [REAR/REAR].

.

unit

Select to update the unit to the latest software and
initialize the unit settings. For details on the latest
software and updating, visit our website.

restarted automatically.
(Some of the settings may be retained even after

esetting the unit.)

r

2 Press BAND / to select the band from [FM1], [FM2], [FM3], [MW] or

[LW].

3 Press a number button (1/ to 6/ ).

The / buttons can be also used to select a preset station when [SEEK] is set to
[PCH] in the FUNCTION settings (page 11).

Best stations memory (BSM)

The six strongest stations are stored on the number buttons (1/ to 6/ ).

1 After selecting the band, press the M.C. dial to display the main menu.
2 Tur n th e M.C. dial to select [FUNCTION], then press to confirm.
3 Tur n th e M.C. dial to select [BSM], then press to confirm.

To seek a station manually

1 After selecting the band, press / to select a station.

Press and hold / then release to seek an available station.
Scanning stops when the unit receives a station. To cancel seek tuning,
press / .

Radio

The tuner frequencies on this unit are allocated for use in Western Europe,
Asia, the Middle East, Africa and Oceania. Use in other areas may result in poor
reception. The RDS (radio data system) function only works in areas that
broadcast RDS signals for FM stations.

Receiving preset stations

1 Press SRC/OFF to select [RADIO].

[SEEK] needs to be set to [MAN] in the FUNCTION settings (page 11).

To store stations manually

1 While receiving the station you want to store, press and hold one of the

number buttons (1/ to 6/ ) until it stops flashing.

Using PTY functions

The unit searches for a station by PTY (program type) information.

5En

Картинка с сайта: manualmachine.com

1 Press during FM reception.

2 Turn the M.C. dial to select a program type from [NEWS/INFO],

[POPULAR], [CLASSICS] or [OTHERS].

3 Press the M.C. dial.

The unit begins to search for a station. When it is found, its program service
na

me is displayed.

• To cancel the search, press the M.C. dial.

• The program of some stations may differ from that indicated by the transmitted PTY.

• If no station is broadcasting the type of program you searched for, [NOT FOUND] is

displayed for about two seconds and then the tuner returns to the original station.

USB/iPod/AUX

Before removing the device, stop playback.

AOA connections

For details on AOA connection, see page 9.

MTP connection

A device installed with Android OS 4.0 or later can be connected to the unit via MTP, using
the cable supplied with the device. However, depending on the connected device and the
numbers of the files in the device, audio files/songs may not be able to be played back via
MTP. Note th at MTP connection i s not compatible with WAV and FLAC file formats .

If you use an MTP connection, [ANDROID WIRED] needs to be set to [MEMORY] in the
SYSTEM settings (page 13).

AUX

1 Insert the stereo mini plug into the AUX input jack.
2 Press SRC/OFF to select [AUX] as the s ource.

iPod function is not available for MVH-190UBG/190UB.

Playing back

Disconnect headphones from the device before connecting it to the unit.

USB devices (including Android™)/iPod

1 Open the USB port cover.
2 Plug in the USB device/iPod using an appropriate cable.

To automatically switch to [USB] source when a USB device/ iPod is connected to the unit,
set [USB AUTO] to [ON] in the SYSTEM settings (page 13).

Use an optional Pioneer USB cable (CD-U50E) to connect the USB device as any device
connected directly to the unit will protrude out from the unit, which could be dangerous.

6En

If [AUX] is set to [OFF] in the SYSTEM settings, [AUX] cannot be selected as a source
(page 13).

Operations

You can make various adjustments in the FUNCTION settings (page 10) .
Note that the following operations do not work for an AUX device. To operate
an

AUX device, use the device itself.

Purpose Operation

Select a folder/album*1 Press 1/ or 2/ .
Select a track/song (chapter) Press or .
Fast forwa rd or reverse *2 Press and hold or .

Картинка с сайта: manualmachine.com

Purpose Operation

Search for a file from a list 1 Press to display the l ist.

View a list of the files in the selected
folde r/catego ry*1

Play a song in the selected folder/

egory*1

cat
Alphabetical search (iPod only) 1 P

Repeat play Press 6/ .
Random/shuffle play Press 5/ .
Shuffle all play (iPod only) Press and hold 5/ .
Pause/resume playback Press 4/PA
Sound retriever Press 3/S.

Return to root folder (USB only)*1 Press and hold

rn th e M.C. dial to select the

2 Tu

desired file (folder) name or
category, then press to confirm.

rn th e M.C. dial to select the

3 Tu

desired file, then press to confirm.
Playback starts.

Press the M.C. dial when a folder/
category is selected.

Press and hold the M.C. dial when a
folder/category is selected.

ress to display the list.

rn th e M.C. dial to select the

2 Tu

desired category list, then press
to enter the alphabetical search

e.

mod
(Turning the M.
enters the alphabetical search
mode.)

rn th e M.C. dial to select a letter,

3 Tu

then press to display the
alphabetical list.

To cancel alphabetical search, press

ND/ .

BA

[1]: Effective for low compression rates
[2]: Effective for high compression

tes

ra

US E.

Rtrv.

C. dial twice also

.

Purpose Operation

Change drives in USB device
(Devices that support the USB mass

torage device class protocol only)

s

*1 Compressed audio files only
*2 When you use the fast forward or reverse function while playing a VBR file, the playback

time may be not correct.

Press BAND/ .

Useful functions for iPod

Link play mode

You can access songs based on the artist, album, or genre currently playing.

1 While listening to a song, press and hold to enter the link play mode.
2 Turn t he M.C. dial to select the mode ([ARTIST], [ALBUM], [GENRE]), then

press to confirm.

The selected song/album will be played after the currently playing song.

The selected song/album may be canceled if you use functions other than those from the
link play mode (e.g. fast forward and reverse).

iPod control

You can control the unit via a connected iPod.
The following iPod models are not compatible with this function.

–iPod nano 1st generation, iPod with video

1 Press BAND/ during playback, then select the control mode.

[CO

NTRO L iPod]: The unit’s iPod function can be operated from the

connected iPod.
[CO

NTRO L AUDIO]: The unit’s iPod function can only be operated by the

buttons on the unit or suppli ed remote control. In this mode, the connected
iPod cannot be turned on or off.

• Pressing iPod can also switch the control mode (only for MVH-190UI).

7En

Картинка с сайта: manualmachine.com

• Switching the co ntrol mode to [CONTROL iPod] pauses song playback. Use the connected

iPod to resume playback.

• The following operations are still accessible from the unit, even if the control mode is set

to [CONTROL iPod].
– Pause, fast forward/reverse, song/chapter selection

• The volume can only be adjusted from the unit.

App Mode

(APP mode is not available for MVH-190UBG/190UB.)
You can enjoy listening to an application on an iPhone via the unit. In some
cases, y

ou can control an application by using the unit.

For details on compatible devices, visit our website.

Use of third party apps may involve or require the provision of personally identifiable
information, whether through the creation of a user account or otherwise, and for certain
applications, the provision of geo location data.
ALL THIRD PARTY APPS ARE THE SOLE RESPONSIBILITY OF THE PROVIDERS, INCLUDING
WITHOUT LIMITATION COLLECTION AND SECURITY OF USER DATA AND PRIVACY
PRACTICES . BY ACCESSING THIR D PART Y APPS, YOU AGREE TO REVIEW THE TERM S OF
SERVICE AND PRIVACY POLICIES OF THE PROVIDERS. IF YOU DO NOT AGREE WITH THE
TERMS OR POLICIES OF ANY PROVIDER OR DO NOT CONSENT TO THE USE OF
GEOLOCATION DATA WHE RE APPLICABLE, DO NOT USE THAT THIRD PARTY APP.

For iPhone users

This function is compatible with iPhones and iPod touches ins talled with iOS 5.0 or la ter.

3 Operate the mobile device to start up the application.

Basic operations

You can make various adjustments in the FUNCTION settings (page 10) .

Purpose Operation

Select a track Press or .
Fast forwa rd or reverse Press and hold or .
Pause/resume playback Press BAND/ .

Spotify®

(MVH-190UI/190UBG/190UB is only compatible with Spotify installed on
iP

hone.)
Spotify is a music streaming distribution
More information is available at http://www.spotify.com.
The Spotify application is available for compatible smartphones, please visit
h

ttps://support.spotify.com/ for the latest compatibility information.
To enjoy Spotify as you drive, first download the Spotify app to your iPhone.
Y

ou can download it on the iTunes App Store. Choose a free account or a paid
Premium account, either in the app or at spotify.com. A Premium account
gives you more features, like offline listening.

service not affiliated with Pioneer.

PIONEER IS NOT LIABLE FOR ANY THIRD PARTY APPS OR CONTENT, INCLUDING WITHOUT
LIMITATION THEIR ACCURACY OR COMPLETENESS. THE CONTENT AND FUNCTIONALITY OF
SUCH APPS ARE THE SOLE RESPONSIBILITY OF THE APP PROVIDER.

Playback of an application via the unit

1 Connect this unit with the mobile device.

• iP

hone via USB (page 6)

2 Press SRC/OFF to select [APP].

8En

• This product incorporates Spotify software which is subject to 3rd party licenses found

here: www.spotify.com/connect/third-party-licenses.

• For information on the countries an d regions where Sp otify can be used, take a look at

https://www.spoti fy.com/us/select-your-country /.

Listening to Spotify

Update the firmware of the Spotify application to the latest version before use.

1 Connect this unit with the mobile device.

Картинка с сайта: manualmachine.com

• iPhone via USB (page 6)

2 Press SRC/OFF to select [SPOTIFY].
3 Launch the Spotify application on the mobile device and start playback.

Purpose Operation

Store the information about the song
currently being played.
Remove the song information stored.

1 Press and hold 3/S.Rtr v.

[SAVE]/[UNSAVE] appears.

ress the M.C. dial.

2 P

Basic operations

You can make various adjustments in the FUNCTION settings (page 10).

The available operations may vary according to the type of contents (track/album/artist/
playlist/radio) you want to play.

Purpose Operation

Skip a track Press or .
Search for a track from a list 1 Press (list) to display the list.

Pause/resume playback Press 4/
Thumbs Up (Only for radio) Press 1/ .
Thumbs Down (Only for radio) Press 2/ .
Random play (Only for track/album/

a

rtist/p laylist)

Repeat play (Only for track/album/
a

rtist/p laylist)

Start a radio channel based on the
so

ng currently being played.

rn th e M.C. dial to select the

2 Tu

desired category, then press to
confirm.

rn th e M.C. dial to select the

3 Tu

desired file, then press to confirm.
Playback starts.

PAUSE.

Press 5/ .

Press 6/ .

1 Press and hold (list) to star t a

radio.

ress the M.C. dial.

2 P

function may not be available

• This

depending on the selected song.

Some functi ons of Spotify may not be opera ted from the unit.

Using Pioneer ARC APP

(Pioneer ARC APP for iPhone is not available for MVH-190UBG/190UB.)
You can operate the unit from Pioneer ARC APP installed on an iPhone/

ndroid device. In some cases, you can control aspects of the application, such

A
as source selection, pause, etc., by using the unit.
For details on what operations are available on the application, see the
ap

plication’s help section.

Do not attempt to operate the application while driving. Make sure to pull off the road and
park your vehicl e in a safe location before at tempting to use the controls on the application.

For iPhone users

This function is compatible with iPhones (iPhone 5 or later) and iPod touches
in

stalled with iOS 8.0 or later.

You can download Pioneer ARC APP on iTunes App Store.

For Android device users

This function is compatible with devices that have Android OS 4.1 or later
i

nstalled and also support AOA (Android Open Accessory) 2.0.

You can download Pioneer ARC APP on Google Play™.

Some Android devices connected via AOA 2.0 may not work properly or emit sounds due to
their own software design, regardless of the OS version.

9En

Картинка с сайта: manualmachine.com

Making a connection with Pioneer ARC APP

1 Connect this unit with the mobile device.

• i

Phone/Android device via USB (page 6)

Proceed to step 6 if you select the USB connection for iPhone.

2 Press the M.C. dial to display the main menu.
3 Turn the M.C. dial to select [SYSTEM], then press to confirm.
4 Turn the M.C. dial to select [ANDROID WIRED], then press to confirm.
5 Turn the M.C. dial to select [APP CONTROL] for an Android device

connected via USB.

If [ON] is selec ted in [P.APP AUTO ON] (page 13), Pioneer ARC APP on the
Android device starts automatically, and all the steps are finished.

If Pioneer ARC APP has not been installed on your Android device yet, a message that
prompts you to install th e application will appear on your An droid device. Selec t [OFF]
in [P.APP AUTO ON] to clear the message (page 13).

6 Press SRC/OFF to select any source.
7 Launch Pioneer ARC APP on the mobile device.

You can also launch the application by pressing and holding the M.C. dial for iPhone.

Listening to music on Android

1 Press SRC/OFF to select [ANDROID].

Basic operations

Purpose Operation

Select a track Press or .
Fast forward or reverse Press and hold or .

Purpose Operation

Pause/resume playback Press 4/PAUS E.

Sound retriever Press 3/S.

Rtrv.

[1]: Effective for low compression rates
[2]: Effective for high compression

tes

ra

Settings

You can adjust various settings in the main menu.

1 Press the M.C. dial to display the main menu.
2 Tur n th e M.C. dial to select one of the categories below, then press to

confir m.

• FUNC TION settings (page 10)

• AUDIO s ettings (pag e 11)

• SYSTEM settings (page 12)

• ILLUMINATION settings (page 13)

3 Tur n th e M.C. dial to select the options, then press to confirm.

• iPod-related menu items in the following tables are not available for MVH-190UBG/190UB.

• APP mode-related menu items in the following tables are not available for MVH-190UBG/

190UB.

FUNCTION settings

The menu items vary according to the source.

10En

Картинка с сайта: manualmachine.com

Menu Item Description

FM SETTING

[TALK], [STANDARD], [MUSIC] Match the sound quality level with the

BSM

REGIONAL

[ON], [OFF] Limit the reception to the specific regional

LOC AL

FF], [LV1], [LV2], [LV3],

FM: [O
[LV4]

OFF], [LV1], [LV2]

MW/LW: [

TA

[ON], [OFF] Receive current traffic information if

AF

[ON], [OFF] Allow the unit to retune to a different

NEWS

[ON], [OFF] Interrupt the currently selected source with

bro

adcast signal conditions of the FM band
signal. (Available only when FM band is
selected.)

Store the six strongest stations on the

ber buttons (1/ to 6/ )

num
automatically.

rogr ams wh en AF ( alter native frequ encie s

p
search) is selected. (Available only when
FM band is se lected.)

Restrict the tuning station acco rding to the
sign

al strength.

ailable. (Available only when FM band is

av
selected.)

uency providing the same station.

freq
(Available only when FM band is selected.)

programs. (Available only when FM

news
band is selected.)

Menu Item Description

SEEK

[MAN], [PCH] Assign or buttons to seek the

SAVE

UNSAVE

S.RTRV

[1] (effective for low

mpression rates),

co
[2] (effective for high

mpression rates),

co
[OFF]

AUDI O BOOK

[FASTER], [NORMAL],

LOWER]

[S

PAU SE

stations one by one (manual tuning) or

elect a station from the preset channels.

s

Store the information about the song
currently being played to your music list on
Spotify.

Remove the song information stored in

AVE].

[S

Enhance compressed audio and restore

ch sound.

ri
Not available when the FLAC file is played

k.

bac

Change the playback speed. (Not available
when [CONTROL iPod] is selected in the
control mode.)

Pause or resume playback.

AUDIO settings

Menu Item Description
FAD ER *1

Adjust the front and rear speaker balance.

11En

Картинка с сайта: manualmachine.com

Menu Item Description
BALANCE

Adjust the left and right speaker balance.

EQ SETTING

[SUPER BASS], [POWERFUL],

TURAL], [VOCAL],

[NA
[CUSTOM1], [CUSTOM2],
[FLAT]

Select an equalizer band and

r further customising.

level fo
Equalizer band: [80
[250HZ], [800HZ], [2.5KHZ],
[8KHZ]

Equalizer level: [+

LOU DNES S

[OFF], [LOW], [MID], [HI] Compensate for clear sound at low volume.

SUB.W*2

[NOR], [REV], [OFF] Select the subwoofer phase.

SUB.W CTRL*2

Cut-off frequency: [50HZ],

[63HZ], [80HZ], [100HZ],
[125HZ], [160HZ], [200HZ]

Output level: [
Slope level: [–12],

BASS BOO ST

[0] to [+6] Select the bass boost level.

*3

HZ],

6] to [–6]

–24] to [+6]

[–24]

Select or customise the equalizer curve.
[CUSTOM1] can be set separately for each
source. However, each of the below
combinations are set to the same setting
automatica lly.

SB, iPod, ANDROID, SPOTIFY, and APP

• U

(iPhone)

[CUSTOM2] is a shared setting used for all

urces.

so
You can also switch the equalizer by

ressing re peatedly (Only for

p
MVH-190UBG/190UB).

Only frequencies lower than those in the
selected range are output from the
subwoofer.

Menu Item Description
HPF SETTING

FF],

Cut-off frequency: [O
[50HZ], [63HZ], [80HZ],
[100HZ], [125HZ], [160HZ],
[200HZ]

Slope level: [–12],

SLA

[+4] to [–4] Adjust the volume level for each source

*1 Not available when [SUB.W/SUB.W] is selected in [SP-P/O MODE] in the INITIAL settings

(page 5).

*2 Not available when [REAR/REAR] is selected in [SP-P/O MODE] in the INITIAL settings

(page 5).

*3 Not available when [OFF] is selected in [SUB.W].

[–24]

Only frequencies higher than the high-pass
filter (HPF) cutoff are output from the
speakers.

except FM.
Each of the below combinations are set to

he same setting automatically.

t

SB, iPod, ANDROID, SPOTIFY, an d APP

• U

(iPhone)

SYSTEM settings

You can also access to these menus when the unit is turned off.

Menu Item Description
LANGUAGE

[ENG](English),
[РУС](Russian), [TUR](Turkish)

CLOCK SET

12H/24H

[12H], [24H] Select the time notation.

Select the language to display the text
information from a compressed audio file.

Set the clock (page 4).

12En

Картинка с сайта: manualmachine.com

Menu Item Description
AUTO P I

[ON], [OFF] Search for a different station with the same

AUX

[ON], [OFF] Set to [ON] when using an auxiliary device

SPOTIFY

[ON], [OFF] Set to [ON] when using the Spotify

MUTE MODE (

PW SAVE*

ANDROID WIRED

P. AP P A U TO O N

Only for MVH-190UI)

[MUTE], [20dB ATT], [10dB
AT

T]

[ON], [OFF] Reduce the battery power consumption.

[MEMORY], [APP CONTROL] Select the appropriate connection method

[ON], [OFF]

programming, even if using a preset
station.

nnected to the unit.

co

nction.

fu

Mute or attenuate sound automatically
when a signal from equipment with a mute
function is received.

Turning on the source is the only operation

owed when this function is on.

all

or an Android device.

f

Select [ON] to automatically launch Pioneer
ARC APP when an Android device is
connected to the unit vi a AOA. (Not available
when [MEMORY] is selec ted in [ANDROID
WIRED].)

Menu Item Description
USB AUTO

[ON], [OFF] Select [ON] to automatically swi tch to

* [PW SAVE] is canceled if the vehicle battery is disconnected and will need to be turned

back on once the battery is reconnected. When [PW SAVE] is off, depending on
connection methods, the unit m ay continue to draw pow er from the battery if your
vehicle’s ignition does not have an ACC (accessory) position.

SB] source when a USB device/iPod is

[U
connected to the unit.
Select [OFF] when a USB device/iPod is

eing connected to the unit just for

b
charging.

ILLUMINATION settings

Menu Item Description
DIM SETTING

[SYNC CLOCK], [MANUAL] Change the display brightness.

BRIGHTNESS

[1] to [10] Change the display brightness.

The available setting ranges differ

pending on [DIM SETTING].

de

13En

Картинка с сайта: manualmachine.com

Connections/Installation

Connections

• When installing this unit in a vehicle

without an ACC (accessory) position
on the ignition switch, failure to
connect the red cable to the terminal
that detects operation of the ignition
key may result in batter y drain.

• Use of this unit in conditions other

than the following could resul t in fire
or malfunction.
– Vehicles with a 12-volt battery and

tive grounding.

nega

– When speaker output is used by 4

ls, use speakers over 50 W

channe
(maximum input power) and
between 4 Ω to 8 Ω (impedance
value). Do not use 1 Ω to 3 Ω
speakers for this unit.

– When rear speaker output is used

y 2 Ω of subwoofer, use speakers

b
over 70 W (maximum input power).
* Please refer to connections for a

onnecti on method.

c

o prevent a short-circuit,

• T

overheating or malfunction, be sure
to follow the directions below.
– Disconnect the neg ative terminal

the battery before insta llation.

of

• W

– Secure the wiring with cable

amps or adhesive tape. Wrap

cl
adhesive tape around wiring that
comes into contact with metal
parts to protect the wiring.

– Place all cables away from moving

arts, such as the shift lever and

p
seat rails.

– Place all cables away from hot

such as near the heater

places,
outlet.

– Do not connect the yellow cable to

he battery by passing it through

t
the hole to the engine
compartment.

– Cover any disconnected cable

onnectors with insulating tape.

c
– Do not shorten any cables.
– Never cut the insulation of the

wer cable of this unit in order to

po

share the power with other devices.

The current capacity of the cable is

limited.
– Use a fuse of the rating prescribed.
– Never wire the negative speaker

irectly to ground.

cable d
– Never band together negative

les of multiple speakers.

cab

hen this unit is on, control signals
are sent through the blue/white
cable. Connect this cable to the
system remote control of an extern al
power amp or the vehicle’s auto­antenna relay control terminal (max.
300mA 12 V DC). If the vehicle is
equipped with a glass antenna,

connect it to the antenna booster
power supply terminal.

• Never connect the blue/white cable

to the power terminal of an external
power amp. Also, never connect it to
the power terminal of the auto
antenna. Doing so may result in
battery drain or a malfunction.

ack cable is ground. Ground

• The bl

cables for this unit and other
equipment (especially, high-current
products such as power amps) must
be wired separately. If they are not,
an accidental detachment may res ult
in a fire or malfunction.

raphical symbol placed

• The g

on the product means direct current.

This unit

Power cord input
Rear output or subwoofer output
Front output (Only for MVH-190UI)
Antenna input
Fuse (10 A)
Wired remote input (Only for MVH­190UI)
Hard-wired remote control adapter

nnected (sold separately).

can be co

Power cord

To power cord input
Depending on the kind of vehicle,
the function of and may be
different. In this case, be sure to

nnect to and to .

co
Yel l ow
Back-up (or accessory)
Yel l ow
Connect to the constant 12 V

pply terminal.

su
Red
Accessory (or back-up)
Red
Connect to terminal controlled by

he ignition switch (12 V DC).

t
Connect leads of the same colour
to each other.
Black (chassis ground)

14En

Картинка с сайта: manualmachine.com

Blue/white
The pin position of the ISO
connector will differ depending on
the type of vehicle. Connect and

when Pin 5 is an antenna

control type. In another type of

hicle, never connec t and .

ve
Blue/white
Connect to the system control

erminal of the power amp (max.

t
300 mA 12 V DC).
Blue/white
Connect to the auto-antenna relay

ontrol terminal (max. 300 mA 12 V

c
DC).
Yellow/black (Only for MVH-190UI)
If you use equipment with a Mute

unction, wire this lead to the

f
Audio Mute lead on that
equipment. If not, keep the Audio
Mute lead free of any connections.
Speaker leads
White: Front left
White/black: Front left
Gray: Front right
Gray/black: Front right
Green: Rear left or subwoofer
Green/black: Rear left or
subwoofer
Violet: Rear right or subwoofer

Violet/bla ck: Rear right or
subwoofer
ISO connector
In some vehicles, the ISO connector

y be divided into two. In this

ma
case, be sure to connect to both
connectors.

• Change the initial menu of this unit.

Refer to [SP-P/O MODE]

subwoofer output of this unit is

naural.

mo

hen using a subwoofer of 2 Ω, be

• W

sure to connect the subwoofer to the

violet and violet/black leads of this

unit. Do not connect anything to the

green and green/black leads.

(page 5). The

Power amp (sold separately)

Perform these connections when
using the optional amplifier.

System remote control

Connect to blue/white cable.
Power amp (sold separately)
Connect with RCA cables (sold

separately)
To front output*
Front sp eaker*
To rear output or subwoofer output
Rear speaker or subwoofer

* Only for MVH-190UI

Installation

• Check all connections and systems

before final installation.

• Do not use unauthorized parts as

this may cause malfunctions.

onsult your dealer if installation

• C

requires drilling of holes or other
modifications to the vehicle.

not install this unit where:

• Do

– it may interfere with operation of

he vehicle.

t

– it may cause injury to a passenger

a result of a sudden stop.

as

he semiconductor laser will be

• T

damaged if it overheats. Install this
unit away from hot places such as
near the heater outlet.

ptimum

• O

performance is
obtained when the
unit is installed at an
angle of less than 60°.

hen installing, to ensure proper

• W

heat dispersal when us ing this unit,
make sure you leave ample space
behind the rear panel and wrap any
loose cables so they are not blocking
the vents.

DIN mount installation

1 Insert the supplied mounting

sleeve into the dashboard.

2 Secure the mounting sleeve by

using a screwdriver to bend the
metal tabs (90°) into place.

Dashboard
Mounting sleeve

ake sure that the unit is

• M

installed securely in place. An
unstable installation may cause
skipping or other malfunctions.

When not using the supplied
mounting sleeve

1 Line up the holes on the

mounting bracket with the holes
on the sides of the unit to attach
the bracket.

2 Screw in one screw on ea ch side to

hold the unit in place.

15En

Картинка с сайта: manualmachine.com

Tapping screw (5 mm × 9 mm,

not supplied with product)
Mounting bracket
Dashboard or console

Using the included bracket

Check to make sure that the included
bracket matches your partic ular
model of vehicle and then attach it to
the unit as shown below.

16En

Removing the unit (installed
with the supplied mounting
sleeve)

1 Remove the trim ring.

Trim rin g
Notched tab

eleasing the front panel allows

• R

easier access to the trim ring.

hen reattaching the trim ring,

• W

point the side with the notched
tab down.

2 Inser t the supplied extraction

keys into bot h sides of the unit
until they click into place.

3 Pull the unit out of the dashboard.

Картинка с сайта: manualmachine.com

Additional Information

Troubleshooting Error messages

The displa y automatically ret urns to
the normal display.

→ No operations have been made for

about 30 seconds.
– Perform an operation.

The repeat play range changes
unexpectedly.

→ Depending on the repeat play

range, the selected range may
change when another folder or
track is being selected or during
fast forwarding/reversing.
– Select the repeat play range

ain.

ag

A subfolder is not played back.

→ Subfolders cannot be played when

[FLD] (folder repeat) is selected.
– Select another repeat play range.

The sound is intermittent.

→ You are using a device, such as a

cellular phone, that may cause
audible interference.
– Move electrical devices that may

ausing the interference away

be c
from the unit.

Common

AMP ERROR

→ This unit fails to operate or the

speaker connection is incorrect.

→ T

– Check the speaker connection.

–Turn the ignition switch OFF and

NO XXXX (NO TITLE, for example)
→ There is no embedded text

information.

– Switch the displ ay or play another

USB device/iPod

FORMAT READ

→ Sometimes there is a delay

between the start of playback and

when you start to hear any sound.

– Wait until the message

NO AUDIO

→ There are no songs.

– Transfer the audio files to the USB

→ The co

security enabled.

he protective circuit is a ctivated.

ck to ON again. If the message

ba
remains, contact your dealer or an
authorized Pioneer Service
Station for assistance.

ack/file.

tr

isappears and you hear sound.

d

evice and connect.

d

nnected USB device has

–Follow the USB device

instructions to disable the
security.

SKIPPED

→ The connected USB device contains

DRM protected files.
– The protected files are skipped.

PROTECT

→ All the files on the connected USB

device are embedded with DRM.
– Replace the USB device.

N/A USB

→ The connected USB device is not

supported by this unit.
– Disconnect your device and

eplace it with a compatible USB

r
device.

HUB ERROR

→ The USB device connected via a

USB hub is not supported by this
unit.
– Connect the USB device directly

this unit using a USB cable.

to

CHECK USB

→ The USB connector or USB cable

has short-circuited.
– Check that the USB connector or

B cable is not caught in

US
something or damaged.

nnected USB device

→ The co

consumes more than maximum
allowable current.
– Disconnect the USB device and

o not use it. Turn the ignition

d
switch OFF and back to ACC or

ON. Connect only compliant USB
devices.

e iPod operates correctly but

→ Th

does not charge.
– Make sure the connection cable

or the iPod has not shorted out

f
(e.g., not caught in metal objects).
After checking, turn the ignition
switch OFF and back to ON, or
disconnect the iPod and
reconnect.

ERROR-19

→ Communication failed.

– Perform one of the following

perations, then return to the

o
USB source.

urn the ignition switch OFF and

• T

back to ON.

isconnect the USB device.

• D

hange to a different source.

• C

od failure.

→ iP

– Disconnect the cable from the

od. Once the iPod’s main menu

iP
is displayed, reconnect the iPod
and reset it.

ERROR-23

→ USB device was not formatted

properly.
– Format the USB device with

12 , FAT1 6 or FAT 32.

FAT

ERROR-16

→ The iPod firmware version is old.

– Update the iPod version.

od failure.

→ iP

– Disconnect the cable from the

od. Once the iPod’s main menu

iP

17En

Картинка с сайта: manualmachine.com

is displayed, reconnect the iPod

and reset it.

STOP

→ There are no songs in the current

list.
– Select a list that contains songs.

NOT FOUND

→ No related songs.

– Transfer songs to the iPod.

Apps

START UP APP

→ The application has not started

running yet.
– Operate the mobile device to

art up the application.

st

Spotify

CHECK APP

→ Connection to the Spotify

application failed.
– Follow the instructions that

ar on the screen.

appe

Handling guidelines

USB storage device

• Connections via USB hubs are not

supported.

irmly secure the USB storage device

• F

before driving. Do not let the USB
storage device fall onto the floor,
where it may become jammed under
the brake or accelerator pedal.

epending on the USB storage

• D

device, the following problems may
occur.
–Operations may vary.
–The storage device may not be

gnized.

reco

– Files may not be played back

operly.

pr

– The device may cause audible

erference when you are lis tening

int
to the radio.

iPod

• Do not leave the iPod in places with

high temperatures.

irmly secure the iPod when driving.

• F

Do not let the iPod fall onto the floor,
where it may become jammed under
the brake or accelerator pedal.

he settings of the iPod such as the

• T

equalizer and repeat play are
changed automatically when the
iPod is connec ted to the unit. Once
the iPod is disconnected, those
settings will return to the original
settings.

ncompatible text saved on the iPod

• I

will not be displayed by the unit.

Compressed audio
compatibility

• On

ly the first 32 characters can be
displayed as a file name (including
the file extension) or a folder name.

• The unit may not work properly

depending on the application used
to encode WMA files.

ay be a slight delay at the

• There m

start of the playback of audio files
embedded with image data, or audio
files stored on a USB device with
numerous folder hierarchies.

ussian text to be displayed on this

• R

unit should be encoded in one of the
following character sets:
– Unicode (UTF-8, UTF-16)
– A character set other than Unicode

hat is used in a Windows

t
environment and is set to Russian
in the multi-language setting

• Pioneer cannot guarantee

compatibility with all USB mass
storage devices, and assumes no
responsibility for any loss of data on
media players, smartphones, or
other devices while using this
product.

• Do not leave discs or a USB storage

device in any place that is subject to
high temperatures.

WMA files

File ex tension .wma
Bit rate 48 kbps to 320 kbps

Sampling
frequency

(CBR), 48 kbps to
384 kbps ( VBR)

32 kHz, 44.1 kH z, 48
kHz

Window s Media™
Audio Professiona l,
Lossless, Voice/
DRM Stream/
Stream with video

Not compatible

MP3 files

File ex tension .mp3
Bit rate 8 kbps to 320 kbps

Sampling
frequency

Compatible ID3 tag
versio n

M3u playlist Not compatible
MP3i (MP3

interactive), mp3
PRO

(CBR), VBR
8 kHz to 48 kHz (32

kHz, 44.1 kHz, 48
kHz for empha sis)

1.0, 1.1, 2.2, 2.3, 2.4
(ID3 tag Version 2.x
is given priority
over Version 1.x. )

Not compatible

WAV files

• WAV file formats cannot be

connected via MTP.

File ex tension .wav
Quantization bits 8 and 16 (LP CM), 4

Sampling
frequency

(MSADPCM)
16 kHz to 48 kHz

(LPCM), 22.05 kHz
and 44.1 kHz (MS
ADPCM)

FLAC files

• FLAC file formats cannot be

connected via MTP.

18En

Картинка с сайта: manualmachine.com

• FLAC files may not be playable,

depending on the encoder.

File ex tension .flac
Sampling

frequency

Quantization bit
rate

Channel mode 1/2 ch

USB device

• There may be a slight delay when

starting playback of audio files on a
USB storage device with numerous
folder hierarchies.

Playable folder
hierarchy

Playable folders Up to 500
Playable file s Up to 15 000
Playback of

copyright­protected files

Partitioned USB
device

iPod compatibility

generation)

This unit supports only the following iPod
models. Supported iPod software versions
are shown below. Older versions may not
be supported.
Made for

–iPod touch (1st through 6th

8/11.025/12/16/

22.05/24/32/44.1/
48 kHz

16 bit

Up to eight tiers (A
practical hierarchy
is less than two
tiers.)

Not compatible

Only the firs t
partition can be
played.

–iPod classic
– iPod with video
–iPod nano (1st through 7th

ration)

gene
–iPhone 6s
– iPhone 6s Plus
–iPhone 6
–iPhone 6 Plus
–iPhone 5s
–iPhone 5c
–iPhone 5
–iPhone 4s
–iPhone 4
–iPhone 3GS
–iPhone 3G
–iPhone

perations may vary depending on

• O

the generation and/or software

version of the iPod.

sers of iPod with the Lightning

• U

Connector should use the Lightning

to USB Cable (supplied with iPod).

sers of iPod with the Dock

• U

Connector should use the CD-IU51.

For details, consult your dealer.

efer to the iPod manuals for

• R

information about the file/format

compatibility.

udiobook, Podcast: Compatible

• A

Pioneer accepts no responsibility for
data lost on the iPod, even if that data
is lost while this unit is used.

Sequence of audio files

The user cannot assign folder
numbers and specify playback
sequences with this unit. Sequence of
audio file depends on the connected
device.
Note that the hidden files in a USB

nnot be played back.

device ca

Example of a hierarchy

Russian character
chart

Copyright and
trademark

iTunes

Apple and iTunes are trademarks of

pple Inc., registered in the U.S. and

A
other countries.

19En

Картинка с сайта: manualmachine.com

WMA

Windows Media is either a registered

rademark or trademark of Microsoft

t
Corporation in the United States and/
or other countries.
This product includes technology

ned by Microsoft Corporation and

ow
cannot be used or distributed without
a license from Microsoft Licensing, Inc.

FLAC

Copyright © 2000-2009 Josh Coalson
Copyright © 2011-2013 Xiph.Org

und atio n

Fo
Redistribution and use in source and

inary forms, with or without

b
modification, are permitted provided
that the following conditions are met:
– Redistributions of source code must

etain the above copyright notice,

r
this list of conditions and the
following disclaimer.

– Redistributions in binary form must

duce the above copyright

repro
notice, this list of conditions and the
following disclaimer in the
documentation and/or other
materials provided with the
distribution.

– Neither the name of the Xiph.org

oundation nor the names of its

F
contributors may be used to endorse
or promote products derived from
this software without specific prior
written permission.

THIS SOFTWARE IS PROVIDED BY THE

PYRIG HT HOLDERS AND

CO
CONTR IBUTORS “AS IS” AND ANY
EXPRESS OR IMPLIED WARRANTIES,

INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR
A PARTICULAR PURPOSE ARE
DISCLAIMED. I N NO EVENT SHALL TH E
FOUNDATION OR CONTRIBUTORS BE
LIABLE FOR ANY DIREC T, INDIRECT,
INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE
GOODS OR SERVICES; LOSS OF USE,
DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED
AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT
LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE) ARISING
IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILIT Y OF SUCH DAMAGE.

iPod & iPhone

iPhone, iPod, iPod classic, iPod nano,

iPod touch are trademarks of

and

pple Inc., registered in the U.S. and

A
other countries.
Lightning is a trademark of Apple Inc.
“Made for iPod” and “Made for iPhone”

ean that an electronic accessory has

m
been designed to connect specifically
to iPod or iPhone, respectively, and
has been certified by the developer to
meet Apple performance standards.
Apple is not responsible for the
operation of this device or its
compliance with safety and regulatory
standards. Please note that the use of

this accessory with iPod or iPhone
may affect wireless performance.

Android & Google Play

Android, Google Play, and the Google

logo are trademarks of Google

Play
Inc.

Spotify®

SPOTIFY and the Spotify logo are

ong the registered trademarks of

am
Spotify AB. Compatible mobile digital
devices and premium subscription
required, where available, see https://
www.spotify.com.

Specifications

General

Power source: 14.4 V DC (10.8 V to 15.1

V allowable)
Grounding system: Negative type
Maximum current consumption: 10.0

A
Dimensions (W × H × D):

DIN

Chassis: 178 mm × 50 mm × 97

mm

Nose: 188 mm × 58 mm × 17 mm

D

Chassis: 178 mm × 50 mm × 97

mm

Nose: 170 mm × 46 mm × 17 mm
Weight : 0.5 kg

Audio

Maximum power output:

• 50 W × 4 ch/4 Ω (for no
ubwoofer)

s

• 50 W × 2 ch/4 Ω + 70 W × 1 ch/2
Ω (for subwoofer)

Continuous power output:

22 W × 4 (50 Hz to 15 000 Hz, 5 %

D, 4 Ω load, both channels

TH

ven)

dri

Load impedance: 4 Ω (4 Ω to 8 Ω

lowable)

al
Preout maximum output level: 2.0 V
Loudness contour: +10 dB (100 Hz),

6.5 dB (10 kHz) (volume: –30 dB)

+
Equalizer (5-Band Graphic Equalizer):

Frequency: 80 Hz/250 Hz/800 Hz/

Hz/8 kHz

2.5 k

Equalization range: ±12 dB (2 dB

ep)

st
Subwoofer (mono):

Frequency: 50 Hz/63 Hz/80 Hz/

125 Hz/160 Hz/200 Hz

100 Hz/

Slope: –12 dB/oct, –24 dB/oct

Gain: +6 dB to –24 dB

Phase: Normal/Reverse

USB

USB standard specification: USB 2.0

full speed
Maximum current supply: 1 A
USB Protocol:

MSC (Mass Storage Class)

MTP (Media Transfer Protocol)

AOA (Android Open Accessory)

2.0
Fi le s yst em: FAT 12, FAT 16, FAT32
MP3 decoding format: MPEG-1 & 2

dio Layer 3

Au

WMA decoding format: Ver. 7, 7.1, 8, 9,

1, 12 (2 ch audio) (Windows

10, 1
Media Player)

20En

Картинка с сайта: manualmachine.com

FLAC decoding format: v1.3.0 (Free

Lossless Audio Codec)

WAV signal format: Linear PCM & MS

ADPCM (Non-compressed)

FM tuner

Frequency range: 87.5 MHz to 108.0

MHz

Usable sensitivity: 1 1 dBf (1.0 μV/75 Ω,

o, S/N: 30 dB)

mon

Signal-to-noise ratio: 72 dB (IEC-A

work)

net

MW tuner

Frequency range: 531 kHz to 1 602 kHz
Usable sensitivity: 25 μV (S/N: 20 dB)
Signal-to-noise ratio: 62 dB (IEC-A

work)

net

LW tuner

Frequency range: 153 kHz to 281 kHz
Usable sensitivity: 28 μV (S/N: 20 dB)
Signal-to-noise ratio: 62 dB (IEC-A

work)

net

Specifications and the design are
subject to modifications without
notice.

21En

Картинка с сайта: manualmachine.com

Table des matières

Avant de commencer………………………………………………………. 2

Mise en route…………………………………………………………………… 3

Radio ……………………………………………………………………………….. 5

USB/iPod/AUX …………………………………………………………………. 6

Mode d’application …………………………………………………………. 9

Spotify®……………………………………………………………………………. 9

Utilisation de Pioneer ARC APP……………………………………… 11

Réglages………………………………………………………………………… 12

Réglages FUNCTION ……………………………………………………. 12

Réglages AUDIO…………………………………………………………… 13

Réglages SYSTEM ………………………………………………………… 14

Réglages ILLUMINATION ……………………………………………… 15

Raccordements/Installation ………………………………………….. 16

Informations complémentaires …………………………………….. 19

• Parmi les instructions suivantes, les clés USB ou les lecteurs audio USB sont

collectivement désignés sous le nom de « périphérique USB ».

• Dans ce mode d’emploi, les iPod et les iPhone sont collectivement désignés

sous le nom d’« iPod ».

Avant de commencer

Nous vous remercions d’avoir acheté cet appareil PIONEER

Pour garantir une utilisation correcte, lisez bien ce mode d’emploi avant d’utiliser cet
appareil. Il est particulièrement important que vous lisiez et respec tiez les indications
ATTENTION et PRÉCAUTION de ce mode d’emploi. Conservez-le dans un endroit sûr et
facilement acces sible pour toute consultation ul térieure.

Si vous souhaitez vous débarrasser de cet appareil, ne le mettez pas à la poubelle avec
vos ordures ménagères. Il existe un système de collecte séparé pour les appareils
électroniques usagés, qui doivent être récupérés, traités et recyclés conformément à la
législation.

Dans les états membres de l’UE, en Suisse et en Norvège, les foyers domestiques peuvent
rapporter le urs produits électroniques u sagés gratuitement à des points de col lecte
spécifiés ou à un revendeur (sous réserve d’achat d’un produit similaire).
Dans les pays qui ne sont pas mentionnés ci-dessus, veuillez contacter les autorités locales
pour vous informer de la méthode correcte de mise au rebut.
En agissant ainsi vous assurerez que le produit que vous mettez au rebut est soumis au
processus de traitement, de récupération et de recyclage nécessaire et éviterez ainsi les
effets négatifs potentiels sur l’environnement et la santé publique.

• N’essayez pas d’installer cet ap pareil ou d’en faire l’entretien vous-mê me.
L’installa tion ou l’entretien de cet a ppareil par des p ersonnes sans for mation et sans
expérience en équipem ent électronique et en accessoires auto mobiles peut être
dangereux et vous exposer à des risques d’électrocution ou à d’autres dangers.

• N’essayez pas de démonter ou de modifier cet appareil. Veillez à quitter la route et garer

votre véhicule en lieu sûr avant d’essayer d’utiliser les commandes de l’appareil.

• Ne laissez pas cet appareil entrer en contact avec de l’humidité et/ou des liquides. Cela
pourrait provoquer une décharge électrique. Tout contact avec des liquides pour rait
également provoquer des dommages, de la fumée et une surchauffe de l’appareil.

2Fr

Картинка с сайта: manualmachine.com

• Maintenez le niveau d ’éco ute à une valeur telle que vous pu issiez entendre les sons

provenant de l’extérieur.

• Le Pioneer CarStereo-Pass est utilisable seulement en Allemagne.

• Ce produit est évalué sous des conditions climatiques modérées et tropicales

conformément à la norme C EI 60065 sur les Appareils audio, vidéo et appare ils
électroniques analogues — Exigences de sécur ité.

Si vous rencontrez des problèmes

En cas d’anomalie, veuillez contac ter votre revendeur ou le centre d’entretien agréé par
PIONEER le plus proc he.

Mise en route

Fonctionnement de base

MVH-190UI/190UBG/190UB

Opérations fréquemment utilisées

Objectif Opération

Mettre l’appareil sous tension* Appuyez sur SR

Régler le volume Tournez la molette M.

Sélectionner une source Appuyez plusieurs fois sur SR
Modifier les informations d’affichage Appuyez plusieurs fois sur DIS
Revenir à l’affichage/la liste

précéd

ent(e)

Revenir à l’affichage normal à partir du
me

nu

* Si le fil bleu/blanc de l’appareil est relié à la borne de commande du relais d’antenne

automatique du véhicule, l’antenne se déploie lorsque la source de cet appareil est m ise
en service. Pour rétracter l’antenne, mettez la source hors service.

l’appareil sous tension.
Appuyez longuement sur SRC/
pour mettre l’appareil hors tension.

Appuyez sur MU
de l’appareil. Appuyez à nouveau sur
MUTE ou tournez la molette M.C. pour
rétablir le son.

Appuyez sur BAND/ .

Appuyez longuement sur BAND / .

C/OFF pour mettre

OFF

C..

TE pour couper le son

C/OFF.

P.

Indication de l’affichage

Indication Description

Apparaît lorsqu’il existe un niveau inféri eur de menu ou de

Apparaît lorsqu’un programme d’informations routières est capté.

Apparaît lorsque la fonction TA (informations routières) est

ossier.

d
Apparaît lorsque vous appuyez sur la touche .

Apparaît lorsque la fonction d’accord sur une station locale est en

rvice (page 12).

se

activée (page 12).

3Fr

Картинка с сайта: manualmachine.com

Indication Description

Apparaît lorsque le sound retriever (correcteur de son compressé)
est en service (page 13).

Apparaît lorsque la fonction de commande d’iPod est en ser vice
(page 8).

Retrait de la face avant

Retirez la face avant pour empêcher tout v
périphériques branchés à la face avant et mettez l’appareil hors tension avant
de le retirer.

• Évitez de soumettre la face avant à des chocs excessifs.

• Tenez la face avant à l’abri du soleil et des températures élevées.

• Stockez touj ours la face avant détac hée, dans un étui de protection ou un s ac.

ol. Débranchez tous les câbles et les

Menu de configuration

Lorsque vous mettez le contact sur ON après avoir installé l’appareil, [SET UP
:YES] s’affiche.

1 Appuyez sur la molette M.C..

Si vous n’utilisez pas l’appareil dans les 30 secondes qui suivent, le menu
de

configuration disparaît. Si vous préférez ne pas effectuer la

configuration pour l’instant, tournez la molette M.C. pour sélectionner
[NO], puis appuyez pour valider.

2 Tournez la molette M.C. pour sélectionner les options, puis appuyez

pour valider.

Pour passer à l’option de menu suivante, vous devez valider votre
sélec

tion.

Élément de m enu Description
LANGUAGE Sélectionnez la langue d’affichage des informations

[ENG] (anglais),

] (russe),

[РУС

R] (turc)

[TU

CLOCK SET Réglez l’horloge.
FM STEP Sélect ionnez l’incrément d’accord FM à partir de 100 kHz

[100], [50]

t

extuelles à partir d’un fichier audio compressé.

50 kHz.

ou de

3 [QUIT :YES] apparaît lorsque tous les réglages sont terminés.

Pour revenir au premier élément du menu de configuration, tournez la
mo

lette M.C. pour sélectionner [QUIT :NO], puis appuyez pour valider.

4 Appuyez sur la molette M.C. pour valider les réglages.

• Vous pouvez annuler le réglage du menu en appuyant sur SRC/OFF.

• Ces paramètres peuvent être ajustés à tout moment à partir des réglages SYSTEM

(page 14) et des réglages INITIAL (page 5).

Annulation de l’affichage de démonstration
(DEMO OFF)

1 Appuyez sur la molette M.C. pour afficher le menu principal.
2 Tournez la molette M.C. pour sélectionner [SYSTEM], puis appuyez pour

valider.

3 Tournez la molette M.C. pour sélectionner [DEMO OFF], puis appuyez

pour valider.

4Fr

Картинка с сайта: manualmachine.com

4 Tournez la molette M.C. pour sélectionner [YES], puis appuyez pour

valider.

Réglages INITIAL

1 Appuyez longuement sur SRC/OFF jusqu’à ce que l’appareil se mette

hors tension.

2 Appuyez longuement sur SRC/OFF pour afficher le menu principal.
3 Tournez la molette M.C. pour sélectionner [INITIAL], puis appuyez pour

valider.

4 Tournez la molette M.C. pour sélectionner une option, puis appuyez

pour valider.

Les options varient selon les appareils.

Élément de menu Description
FM STEP Sélect ionnez l’incrément d’accord FM à partir de 100 kHz

[100], [50]

SP-P/O MODE À sélectionner lorsqu’un haut-parleur à gamme étendue

[REAR/SUB.W]

[SUB.W/SUB.W] À sélectionner lorsqu’un haut-parleur d’extrêmes graves

[REAR/REAR] À sélectionner lorsque des haut-parleurs à gamme

de 50 kHz.

ou

relié aux fils de sortie du haut-pa rleur arrière et qu’un

est
haut-parleur d’extrêmes graves est branché à la sortie
RCA.

est directement relié aux fils de sortie du haut-

passif
parleur arrière et qu’un haut-parleur d’extrêmes graves
est branché à la sortie RCA.

endue sont reliés aux fils de sortie du haut-parleur

ét
arrière et à la sortie RCA. Si un haut-parleur à gamme
étendue est relié aux fils de sortie du haut-parleur arr ière
et que la sortie RCA n’est pas utilisée, vous pouvez
sélectionner [REAR/SUB.W] ou [REAR/REAR].

Élément de menu Description
S/W UPDATE À sélectionner pour valider les dernières informations

[SYSTEM INFO]
[SYSTEM

UPDATE]

SYSTEM RESET Sélectionnez [YES] pour réinitialiser les réglages de

[YES], [NO]

relatives au système de l’appareil.

À sélectionner pour effectuer la dernière mise à jour des
logiciels de l’appareil et réinitialiser ses réglages. Pour
obtenir de plus amples informations sur les derniers
logiciels et mises à jour, veuillez vous rendre sur notre
site Web.

’appareil. L’appareil redémarre automatiquement.

l
(Certains réglages sont conservés même après la

ialisation de l’appareil.)

réinit

Radio

Les fréquences du syntoniseur de cet appareil sont destinées à une utilisation
en Europe de l’Ouest, Asie, Moyen-Orient, Afrique et Océanie. Son utilisation
dans d’autres régions peut se traduire par une réception de mauvaise qualité.
La fonction RDS (Radio Data System) n’est opérationnelle que dans les régions
où des signaux RDS sont diffusés pour les stations FM.

Réception des stations présélectionnées

1 Appuyez sur SRC/OFF pour sélectionner [RADIO].
2 Appuyez sur BAND/ pour sélectionner la bande [FM1], [FM2], [FM3],

[MW] ou [LW].

3 Appuyez sur l’une des touches numériques (1/ à 6/ ).

Les touches / peuvent également servir à sélectionner une station préréglée
lorsque [SEEK] est réglé sur [PCH] dans les réglages FUNCTION (page 13).

5Fr

Картинка с сайта: manualmachine.com

Mémoire des meilleures stations (BSM)

Les six stations les plus puissantes sont mémorisées sur les touches
num

ériques (1/ à 6/ ).

1 Après avoir sélectionné la bande, appuyez sur la molette M.C. pour

afficher le menu principal.

2 Tournez la molette M.C. pour sélectionner [FUNCTION], puis appuyez

pour valider.

3 Tournez la molette M.C. pour sélectionner [BSM], puis appuyez pour

valider.

2 Tournez la molette M.C. pour sélectionner le type de programme

[NEWS/INFO], [POPULAR], [CLASSICS] ou [OTHERS ].

3 Appuyez sur la molette M.C..

L’appareil continue à rechercher une sta
nom de service de programme s’affiche.

• Pour annuler la recherch e, appuyez sur la mol ette M.C..

• Le programme de certaines stations peut différer de celui qu’indique le PTY transmis.

• Si aucune station ne diffuse le type de programme que vous recherchez, [NOT FOUND]

s’affiche pendant environ deux secondes, puis le syntoniseur revient à la station de
départ.

tion. Lorsqu’il en trouve une, son

Pour rechercher une station manuellement

1 Après avoir sélectionné la bande, appuyez sur / pour

sélectionner une station.

Appuyez longuement sur / , puis relâchez pour rechercher une
station disponible. Le balayage s’arrête lorsq
Pour annuler l’accord par recherche, appuyez sur / .

[SEEK] doit être réglé sur [MAN] dans les réglages FUNCTION (page 13).

ue l’appareil capte une station.

Pour mémoriser des stations manuellement

1 Lorsque vous captez la station que vous souhaitez mémoriser, appuyez

longuement sur l’une des touches numériques (1/ à 6/ ) jusqu’à ce
qu’elle cesse de clignoter.

Utilisation des fonctions PTY

L’appareil recherche une station diffusant
programme).

des informations PTY (type de

1 Appuyez sur pendant la réception FM.

6Fr

USB/iPod/AUX

La fonction iPod n’est pas disponible pour l e MVH-190UBG/190UB.

Lecture

Débranchez le casque ou les écouteurs du périphérique avant de raccorder ce
dernier à l’appareil.

Périphériques USB (y compris Android™)/iPod

1 Ouvrez le cache du port USB.
2 Raccordez le périphérique USB/l’iPod à l’aide d’un câble approprié.

Pour basculer automatiquement sur une source [USB] lorsqu’un périphérique USB/iPod est
connecté à l’appareil, réglez [USB AUTO] sur [ON] dans les paramètres SYSTEM (page 15).

Картинка с сайта: manualmachine.com

Utilisez un câble USB Pioneer en option (CD-U50E) pour raccorder le périphérique USB, car

tout périphériq ue raccordé directement à l’apparei l dépasse de ce dernier, ce qui pe ut être
dangereux.

Avant de retirer le périphérique, arrêtez la lecture.

Connexions AOA

Pour plus de détails sur la connexion AOA, voir page 11.

Connexion MTP

Il est possible de connecter un périphérique Android (utilisant le système d’exploitation
Android 4.0 ou une version supérieure) via une connexion MTP à l’aide du câble fourni avec
le périphérique. Toutefois, selon le périphérique connecté et les numéros des fichiers qu’il
contient, il se peut que la lecture de fichiers audio/morce aux soit impossible vi a MTP. Notez
que la connexion MTP est incompati ble avec les formats de fichier WAV et FLAC.

Si vous utilisez une connexion MTP, vous devez régler [ANDROID WIRED] sur [MEMORY]
dans les paramètres SYSTEM (page 15).

AUX

1 Insérez la mini-fiche stéréo dans la prise d’entrée AUX.
2 Appuyez sur SRC/OFF pour sélectionner la source [AUX].

Si [AUX] est réglé sur [OFF ] dans les réglages SYSTEM, il est impos sible de sélectionner [AUX]
en tant que source (page 14).

Opérations

Vous pouvez procéder à différents ajustements dans les réglages FUNCTION
(page 12).
Notez que les opérations suivantes ne fonctionnent pas pour un périphérique
A

UX. Pour utiliser un périphérique AUX, utilisez le périphérique proprement

dit.

Objectif Opération
Sélectionner un dossier/album*1 Appuyez sur 1/ ou 2/ .

Objectif Opération

Sélectionner une piste/un morceau
(chapitre)

Avance ou retour r apide*2 Appuyez longuement sur ou

Rechercher un fichier dans une liste 1 Ap

Afficher une liste de fichiers dans la

égorie/le dossi er sélectionné(e)*1

cat

Lire un morceau de la catégorie/du
dossier sélectionné(e)*1

Appuyez sur ou .

.
puyez sur pour afficher la liste.

ournez la molette M.C. pour

2 T

sélectionner la catégorie ou le nom
de fichier (dossier) de votre choix,
puis appuyez pour valider.

ournez la molette M.C. pour

3 T

sélectionner le fichier de votre
choix, puis appuyez pour valider.
La lecture démarre.

Appuyez sur la molette M.C.
lorsqu’une catégorie/un dossier est
sélectionné(e).

Appuyez longuement sur la molette
M.C. lorsqu’une catégorie/un dossier
est sélectionné(e).

7Fr

Картинка с сайта: manualmachine.com

Objectif Opération

Recherche alphabétique (iPod
uniquement)

Lecture ré pétée Appuyez sur 6/ .
Lecture aléatoire Appuyez sur 5/ .
Lecture aléatoire de toutes les pistes

(iPod uniquement)
Pause/Reprise de la lecture Appuyez sur 4/PA
Sound retriever (correcteur de son

mpress é)

co

Retour au dossier racine (USB

uement)*1

uniq

1 Appuyez sur po ur afficher l a liste.

ournez la molette M.C. pour

2 T

sélectionner la liste de catégories de
votre choix, puis appuyez sur
pour accéder au mode de recherche

ique.

alphabét
(Pour accéder au mode de

echerche alphabétique, vous

r
pouvez également tourner
deux fois la molette M.

ournez la molette M.C. pour

3 T

sélectionner une lettre, puis
appuyez pour afficher la liste
alphabétique.

Pour annuler la recherche

lphabétique, appuyez sur BAND/

a

.

Appuyez longuement sur 5/ .

Appuyez sur 3/S.Rtrv.
[1]: efficace pour les taux de

mpression faibles

co
[2]: efficace pour les taux de

mpression élevés

co
Appuyez longuement sur .

US E.

C..)

Objectif Opération

Changer de lec teur sur le périphérique
USB
(périphériques prenant en charge le

otocole de classe de périphérique

pr
de stockage de masse USB
uniquement)

*1 Fichiers d’audio compressé uniquement
*2 Si vous utilisez la fo nction avance ou retour rapide au moment de la le cture d’un fichier

VBR, la durée de lecture peut ne pas être correcte.

Appuyez sur BA

ND/ .

Fonctions utiles pour iPod

Mode de lecture en lien

Vous pouvez accéder à des morceaux en vous basant sur l’artiste, l’album ou le
genre en cours de lecture.

1 Pendant l’écoute d’un morceau, appuyez longuement sur pour entrer

en mode de lecture en lien.

2 Tournez la molette M.C. pour sélectionner le mode ([ARTIST], [ALBUM],

[GENRE]), puis appuyez pour valider.

Le morceau/l’album sélectionné est lu après le morceau en cours de lecture.

Le morceau/l’album sélectionné peut être annulé si vous utilisez d’autres fonctions que le
mode de lecture en lien (ex. : avance et retour rapides).

Commande d’un iPod

Vous pouvez commander l’appareil via un iPod raccordé.
Les modèles d’iPod suivants ne sont pas compatibles avec cette fonction.

–iPod nano 1e génération, iPod avec vidéo

1 Appuyez sur BAND/ en cours de lecture, puis sélectionnez le mode

de commande.

8Fr

Картинка с сайта: manualmachine.com

[CONTR OL iPod] : la fonc tion iPod de l’appareil peut être activée à partir de

l’iPod raccordé.
[CO

NTROL AUDI O] : la fonction iPod de l’appareil ne peut être activée que

par les touches situées sur l’appareil ou par la télécommande fournie. Dans
ce mode, il est impossible de mettre l’iPod raccordé sous ou hors tension.

• Vous pouvez également commuter le mode de commande en appuyant sur iPod

(uniquement pour le modèle MVH-190UI).

• La commutation du mode de commande sur [CONTR OL iPod] met en pause la lecture

d’un morceau. U tilisez l’iPod raccordé pour re prendre la lecture.

• Les opérations suivantes sont toujours accessibles à partir de l’appareil, même si le mode

de commande est réglé sur [CONTROL iPod].
– Pause, avance/retour rapide, sélection d’un morceau/chapitre

• Le volume ne peut être réglé qu’à partir de cet appareil.

Mode d’application

(Le mode APP n’est pas disponible pour le modèle MVH-190UBG/190UB.)
Vous pouvez écouter une application sur un iPhone via cet appareil. Dans
cer

tains cas, vous pouvez commander une application en uti lisant cet appareil.

Pour plus de détails sur les périphériques compatibles, visitez notre site Web.

L’utilisation d’applications tierces peut impliquer ou nécessiter la fourniture d’informations
personnelles, que ce soit en créant un compte d’utilisateur ou une autre mét hode ainsi que,
pour certaines applications, la fourniture de données de géolocalisation.
TOUTES LES APPLICATIONS TIERCES RELÈVENT DE L’ENTIÈRE RESPONSABILITÉ DES
FOURNISSEURS, NOTAMMENT MAIS SANS S’Y LIMITER, LA COLLECTE ET LA PROTECTION
DES DONNÉES UTILISATEUR ET LES BONNES PRATIQUES DE CONFIDENTIALITÉ. EN
ACCÉDANT À UNE AP PLICATION TIERCE, VOUS ACCEPT EZ DE PRENDRE CONNAIS SANCE DES
CONDITIONS DE SERVICE ET DES RÈGLES DE CONFIDENTIALITÉ DES FOURNISSEURS. SI
VOUS N’ACCEPTEZ PAS LES CONDITIONS OU RÈGLES D’UN FOURNISSEUR OU SI VOUS
N’ACCEPTEZ PAS L’UTILISATION DES DONNÉES DE GÉOLOCALISATION, LE CAS ÉCHÉANT,
N’UTILISEZ PAS CETTE APPLICATION TIERCE.

Pour les utilisateurs d’iPhone

Cette fonction est compatible avec les iPhone et les iPod touch installés avec iOS 5.0 ou une
version ultérieure.

PIONEER DÉCL INE TOUTE RESPONSABILITÉ Q UANT AUX APPLIC AT IONS OU AUX CONTENUS
TIERS, Y COMPRI S, SANS S’Y LIMITER, QUANT À LEUR EXAC TITUDE OU À LEUR
EXHAUSTIVITÉ. LE CONTENU ET LA FONCTIONNALITÉ DE CES APPLICATIONS RELÈVENT DE
LA SEULE RESPONSABILITÉ DU FOURNISSEUR DE L’APPLICATION.

Lecture d’une application via cet appareil

1 Connectez cet appareil au périphérique mobile.

Phone via USB (page 6)

• i

2 Appuyez sur SRC/OFF pour sélectionner [APP].
3 Activez le périphérique mobile pour lancer l’application.

Opérations de base

Vous pouvez procéder à différents ajustements dans les réglages FUNCTION
(page 12).

Objectif Opération

Sélectionner une piste Appuyez sur ou .
Avance ou retour r apide Appuyez longuement sur ou

Pause/Reprise de la lecture Appuyez sur BAN

.

D/ .

Spotify®

(MVH-190UI/190UBG/190UB est compatible uniquement avec les iPhone sur

squels Spotify est installé.)

le
Spotify est un service de diffusion de musique en continu non affilié à Pioneer.
D

es informations complémentaires sont disponibles sur http://

www.spotify.com.

9Fr

Картинка с сайта: manualmachine.com

L’application Spotify est disponible pour les smartphones compatibles ;

v

euillez consulter https://support.spotify.com/ afin d’obtenir les dernières
informations sur la compatibilité.
Pour profiter de Spotify pendant que vous conduisez, téléchargez d’abord
l’

application Spotify sur votre iPhone. Vous pouvez la télécharger sur iTunes
App Store. Optez pour un compte gratuit ou payant Premium, sur l’application
ou sur spotify.com. Un compte Premium vous permet d’accéder à davantage
de fonctionnalités, comme l’écoute hors-ligne.

• Ce produit contient le logiciel Spotify qui fait l’objet de licences tierces que vous trouverez

ici : www.spotify.com/connec t/third-party-licenses.

• Pour obtenir de plus amples informations sur les pays et les régions où Spotify peut être

utilisé, consultez https://www.spotify.com/us/select-your-country/.

Écoute de Spotify

Mettez à jour le microprogramme de l’application Spotify à sa dernière version
avant de l’utiliser.

1 Connectez cet appareil au périphérique mobile.

hone via USB (page 6)

• iP

2 Appuyez sur SRC/OFF pour sélectionner [SPOTIFY].
3 Lancez l’application Spotify sur le périphérique mobile, puis lancez la

lecture.

Opérations de base

Vous pouvez procéder à différents ajustements dans les réglages FUNCTION
(page 12).

Les opérations disponibles peuvent varier selon le type de contenus (titres/albums/artistes/
listes de lecture/radios) que vous souhaitez lire.

Objectif Opération

Sauter une piste Appuyez sur ou .

Objectif Opération

Rechercher un titre dans une liste 1 Appuyez sur (liste) pour afficher

Pause/Reprise de la lecture Appuyez sur 4/
Pouces levés (uniquement pour la

ra

dio)

Pouces baissés (uniquement pour la
ra

dio)

Lecture aléatoire (uniquement pour
l

es titres/albums/artistes/listes de

lecture)
Lecture répétée (uniquement pour les

titres/albums/artistes/listes de lecture)
Lancez une station de radio en

fo

nction de la chanson en cours de

lecture.

Enregistrez les informations

ncernant la chanson en cours de

co
lecture.
Supprimez les informations relatives à

anson enregistrées.

la ch

Certaines fonctions de Spotif y ne peuvent pas être ac tivées à partir de cet appareil.

la liste.

ournez la molette M.C. pour

2 T

sélectionner la catégorie de votre
choix, puis ap puyez pour valider.

ournez la molette M.C. pour

3 T

sélectionner le fichier de votre
choix, puis ap puyez pour valider.
La lecture commence.

PAUSE.

Appuyez sur 1/ .

Appuyez sur 2/ .

Appuyez sur 5/ .

Appuyez sur 6/ .

1 Appuyez longuement sur (liste)

pour lancer une radio.

puyez sur la molette M.C..

2 Ap

ette fonction peut ne pas être

• C

disponible selon la chanson
sélectionnée.

ez longuement sur 3/S.Rtr v.

1 Appuy

[SAVE]/[UNSAVE] apparaît.

2 Appuyez sur la molette M.C..

10Fr