Sony str de597 инструкция

STR-DE597

SERVICE MANUAL

Ver 1.0 2004. 04

Photo: Silver type

Manufactured under license from Dolby Laboratories.
“Dolby”, “Pro Logic” and the double-D symbol are
trademarks of Dolby Laboratories.
“DTS”, “DTS-ES”, “Neo:6” and “DTS 96/24” are
trademarks of Digital Theater Systems, Inc.

SPECIFICATIONS

US Model

Canadian Model

AEP Model

UK Model

E Model

Australian Model

AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC

DISTORTION:
(Models of area code US only)

With 8 ohm loads, both channels driven, from
20 – 20,000 Hz; rated 90 watts per channel
minimum RMS power, with no more than

0.09 % total harmonic distortion from 250
milliwatts to rated output.

Amplifier section

Power Output

Models of area code US, CND
Rated Power Output at Stereo Mode
(8 ohms 20 Hz – 20 kHz, THD 0.09 %)

Reference Power Output
(8 ohms 20 Hz – 20 kHz, THD 0.09 %)

(8 ohms 1 kHz, THD 0.7 %)

90 W + 90 W

FRONT
CENTER
SURR
SURR BACK

: 90 W/ch

: 90 W

: 90 W/ch

: 100 W/ch

: 100 W

: 100 W/ch

: 90 W

: 100 W

Models of area code AEP, UK
Rated Power Output at Stereo Mode
(8 ohms 1 kHz, THD 0.7 %)

Reference Power Output
(8 ohms 1 kHz, THD 0.7 %)

Models of area code E2, SP, MY
Rated Power Output at Stereo Mode
(8 ohms 1 kHz, THD 0.7 %)

Reference Power Output
(8 ohms 1 kHz, THD 10 %)

100 W + 100 W

FRONT
CENTER
SURR
SURR BACK

100 W + 100 W

FRONT
CENTER
SURR
SURR BACK

: 100 W/ch

: 100 W

: 100 W/ch

: 120 W/ch

: 120 W

: 120 W/ch

: 100 W

: 120 W

– Continued on next page –

9-877-764-01

2004D04-1
© 2004. 04

FM STEREO/FM-AM RECEIVER

Sony Corporation

Home Audio Company
Published by Sony Engineering Corporation

STR-DE597

Models of area code AR, KR
Rated Power Output at Stereo Mode
(8 ohms 1 kHz, THD 0.7 %)

Reference Power Output

(8 ohms 1 kHz, THD 10 %)

100 W + 100 W
90 W + 90 W

FRONT
CENTER
SURR
SURR BACK

: 120 W/ch

: 120 W

: 120 W/ch

: 120 W

Models of area code AUS
Rated Power Output at Stereo Mode
(8 ohms 20 Hz – 20 kHz, THD 0.09 %)

80 W + 80 W

(8 ohms 1 kHz, THD 0.7 %)

100 W + 100 W

Reference Power Output

(8 ohms 20 Hz – 20 kHz, THD 0.09 %)

FRONT
CENTER
SURR
SURR BACK

(8 ohms 1 kHz, THD 0.7 %)

FRONT
CENTER
SURR
SURR BACK

(8 ohms 1 kHz, THD 10 %)

FRONT
CENTER
SURR
SURR BACK

: 80 W/ch

: 80 W

: 80 W/ch

: 100 W/ch

: 100 W

: 100 W/ch

: 120 W/ch

: 120 W

: 120 W/ch

: 80 W

: 100 W

: 120 W

1) Measured under the following conditions:
Area code Power requirements

US, CND 120 V AC, 60 Hz
AEP, UK, SP, MY, AR, KR 230 V AC, 50 Hz
AUS, E2 240 V AC, 50 Hz

2) Depending on the sound field settings and the
source, there may be no sound output.

3) Measured under the following conditions:

Area code Power requirements
AR, KR 220 V AC, 50 Hz

Frequency response
MULTI CH IN, SA-CD/ 10 Hz – 70 kHz

CD, MD/TAPE, DVD, +0.5/–2 dB (with sound
VIDEO 1, 2 field and tone bypassed)

Inputs (Analog)
MULTI CH IN, SA-CD/ Sensitivity: 500 mV

CD, MD/TAPE, DVD, Impedance: 50 kiloohms
VIDEO 1, 2 S/N

: 96 dB

(A, 500 mV

)

4) INPUT SHORT (with sound field and tone
bypassed).

5) Weighted network, input level.

Inputs (Digital)
DVD (Coaxial) Sensitivity: –

Impedance: 75 ohms
S/N: 100 dB
(A, 20 kHz LPF)

VIDEO 2, SA-CD/CD Sensitivity: –
(Optical) Impedance: –

S/N: 100 dB
(A, 20 kHz LPF)

Outputs (Analog)
MD/TAPE (OUT), Voltage: 500 mV

VIDEO 1 (AUDIO OUT) Impedance: 10 kiloohms
SUB WOOFER Voltage: 2 V

Impedance: 1 kiloohms

Tone
Gain levels ±6 dB, 1 dB step

FM tuner section

Tuning range 87.5 – 108.0 MHz
Antenna FM wire antenna
Antenna terminals 75 ohms, unbalanced
Intermediate frequency 10.7 MHz
Sensitivity

Mono: 18.3 dBf, 2.2 µV/75 ohms

Stereo: 38.3 dBf, 22.5 µV/75 ohms
Useable sensitivity 11.2 dBf, 1 µV/75 ohms
S/N

Mono: 76 dB

Stereo: 70 dB
Harmonic distortion at 1 kHz

Mono: 0.3%

Stereo: 0.5%
Separation 45 dB at 1 kHz
Frequency response 30 Hz – 15 kHz,

+0.5/–2 dB

Selectivity 60 dB at 400 kHz

AM tuner section

Tuning range

Models of area code US, CND

With 10-kHz tuning scale: 530 – 1,710 kHz

With 9-kHz tuning scale: 531 – 1,710 kHz

Models of area code E2

With 10-kHz tuning scale: 530 – 1,610 kHz

With 9-kHz tuning scale: 531 – 1,602 kHz

Models of area code AEP, UK, AUS, SP, MY, KR

With 9-kHz tuning scale: 531 – 1,602 kHz

Models of area code AR

With 10-kHz tuning scale: 530 – 1,610 kHz
Antenna Loop antenna
Intermediate frequency 450 kHz
Usable sensitivity 50 dB/m (at 1,000 kHz or

999 kHz)
S/N 54 dB (at 50 mV/m)
Harmonic distortion 0.5 % (50 mV/m, 400 Hz)
Selectivity

At 9 kHz: 35 dB
At 10 kHz: 40 dB

6) You can change the AM tuning scale to 9 kHz or 10 kHz.

After tuning in any AM station, turn of f the receiv er . While
holding down PRESET TUNING + or TUNING +, press
?/1. All preset stations will be erased when you change
the tuning scale. To reset the scale to 10 kHz (or 9 kHz),
repeat the procedure.

STR-DE597

1.5 k

Ω

0.15 µF

AC
voltmeter
(0.75 V)

To Exposed Metal
Parts on Set

Earth Ground

Video section

Inputs/Outputs

Video: 1 Vp-p, 75 ohms
COMPONENT VIDEO:
(Except for models of area code AEP, UK)

Y: 1 Vp-p, 75 ohms
PB/CB/B-Y: 0.7 Vp-p,
75 ohms
PR/CR/R-Y: 0.7 Vp-p,
75 ohms

80 MHz HD Pass Through

General

Power requirements
Area code Power requirements

US, CND 120 V AC, 60 Hz
AEP, UK 230 V AC, 50/60 Hz
AUS 240 V AC, 50 Hz
SP, MY, AR, KR 220 – 230 V AC, 50/60 Hz
E2 120/220/240 V AC, 50/60 Hz

Power consumption
Area code Power consumption

US, AEP, UK, E2, AUS, 220 W
SP, MY, AR, KR
CND 300 V A

Power consumption (during standby mode)

0.3 W

Dimensions (w/h/d) (Approx.)

430 × 157.5 × 312 mm
(16 7/8 × 6 2/8 × 12 2/8
inches) including
projecting parts and
controls

Mass (Approx.) 8.0 kg (17 lb 11 oz)

Supplied accessories

FM wire antenna (1)
AM loop antenna (1)
Remote commander RM-U306B (1)
R6 (size-AA) batteries (2)

Design and specifications are subject to change
without notice.

•Abbreviation
CND : Canadian model
E2 : AC 120 V area in E model
AUS: Australian model
SP : Singapore model
MY : Malaysia model
AR : Ar gentina model
KR : Korea model

SAFETY CHECK-OUT (US MODEL)

After correcting the original service problem, perform the following safety check before releasing the set to the customer:
Check the antenna terminals, metal trim, “metallized” knobs, screws,
and all other exposed metal parts for AC leakage.
Check leakage as described below.

LEAKAGE TEST

The AC leakage from any exposed metal part to earth ground and
from all exposed metal parts to any exposed metal part having a
return to chassis, must not exceed 0.5 mA (500 microampers.).
Leakage current can be measured by any one of three methods.

1. A commercial leakage tester , such as the Simpson 229 or RCA
WT-540A. Follow the manufacturers’ instructions to use these
instruments.

2. A battery-operated AC milliammeter. The Data Precision 245
digital multimeter is suitable for this job.

3. Measuring the voltage drop across a resistor by means of a
VOM or battery-operated AC voltmeter. The “limit” indication is 0.75 V, so analog meters must have an accurate lowvoltage scale. The Simpson 250 and Sanwa SH-63Trd are examples of a passive VOM that is suitable. Nearly all battery
operated digital multimeters that have a 2 V AC range are suitable. (See Fig. A)

Fig. A. Using an AC voltmeter to check AC leakage.

SAFETY-RELATED COMPONENT WARNING!!

COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE
WITH MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN
THE PARTS LIST ARE CRITICAL TO SAFE OPERATION.
REPLACE THESE COMPONENTS WITH SONY P ARTS WHOSE
PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR
IN SUPPLEMENTS PUBLISHED BY SONY.

ATTENTION AU COMPOSANT AYANT RAPPORT

À LA SÉCURITÉ!!

LES COMPOSANTS IDENTIFIÉS PAR UNE MARQUE 0 SUR LES
DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES
SONT CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT.
NE REMPLACER CES COMPOSANTS QUE PAR DES PIÈCES
SONY DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL
OU DANS LES SUPPLÉMENTS PUBLIÉS PAR SONY.

STR-DE597

MODEL IDENTIFICATION

— BACK P ANEL —

Part No.

MODEL PART No.

US 4-252-454-0s
CND 4-252-454-1s
AEP 4-252-454-2s
UK 4-252-454-3s
SP, MY 4-252-454-4s
AUS 4-252-454-5s
KR 4-252-454-7s
E2 4-252-454-8s
AR 4-252-454-9s

•Abbreviation
CND: Canadian model
E2 : AC 120 V area in E model
AUS: Australian model
SP : Singapore model
MY : Malaysia model
AR : Argentina model
KR : Korea model

1. GENERAL

Main unit ……………………………………………………………………… 5

Remote button description………………………………………………. 6

2. DISASSEMBL Y

2-1. Case ………………………………………………………………………….7

2-2. Front Panel Section ……………………………………………………. 8

2-3. Back Panel Section…………………………………………………….. 8

2-4. Digital Board …………………………………………………………….. 9

2-5. Standby Board …………………………………………………………… 9

2-6. Main Board …………………………………………………………….. 10

2-7. SB AMP Board………………………………………………………… 10

3. TEST MODE …………………………………………………………… 11

4. DIAGRAMS

4-1. IC Pin Descriptions ………………………………………………….. 12

4-2. Circuit Boards Location ……………………………………………. 15

4-3. Block Diagram – Tuner/Audio Section –…………………….. 16

4-4. Block Diagram – Digital Section – …………………………….. 17

4-5. Block Diagram – Video Section – ………………………………. 18

4-6. Block Diagram – Key/Display Section – …………………….. 19

4-7. Block Diagram – Power Section – ……………………………… 20

4-8. Printed Wiring Boards – Main Section – …………………….. 22

4-9. Schematic Diagram – Main Section (1/2) – …………………. 23

4-10. Schematic Diagram – Main Section (2/2) – …………………. 24

4-11. Printed Wiring Board – Digital Section (1/2) – ……………. 25

4-12. Printed Wiring Board – Digital Section (2/2) – ……………. 26

4-13. Schematic Diagram – Digital Section (1/3) – ………………. 27

4-14. Schematic Diagram – Digital Section (2/3) – ………………. 28

4-15. Schematic Diagram – Digital Section (3/3) – ………………. 29

4-16. Printed Wiring Boards –

Center/Surround Back Speaker Section – ……………………. 30

4-17. Schematic Diagram –

Center/Surround Back Speaker Section – ……………………. 31

4-18. Printed Wiring Board – Video Section –……………………… 32

4-19. Schematic Diagram – Video Section –………………………… 33

4-20. Printed Wiring Boards – Display Section – …………………. 34

4-21. Schematic Diagram – Display Section –……………………… 35

4-22. Printed Wiring Boards – Power Section – ……………………. 36

4-23. Schematic Diagram – Power Section – ……………………….. 37

4-24. IC Block Diagrams…………………………………………………… 38

5. EXPLODED VIEWS

5-1. Case Section ……………………………………………………………. 40

5-2. Front Panel Section ………………………………………………….. 41

5-3. Back Panel Section…………………………………………………… 42

5-4. Chassis Section ……………………………………………………….. 43

6. ELECTRICAL PARTS LIST …………………………………. 44

SECTION 1

GENERAL

STR-DE597

This section is extracted
from instruction manual.

STR-DE597

SECTION 2

DISASSEMBLY

Note : This set can be disassemble according to the following sequence.

SET

2-1. CASE

(Page 7)

STR-DE597

2-2. FRONT PANEL SECTION

(Page

2-5. STANDBY BOARD

(Page 9)

2-3. BACK PANEL SECTION

(Page

2-4. DIGITAL BOARD

(Page 9)

2-6. MAIN BOARD

(Page 10)

Note : Follow the disassembly procedure in the numerical order given.

2-1. CASE

two screws

(case 3 TP2)

2-7. SB AMP BOARD

(Page 10)

three screws

(case 3 TP2)

two screws

(case 3 TP2)

case

STR-DE597

2-2. FRONT P ANEL SECTION

two screws

(+BVTP 3 x

CNP791

two screws

(+BVTP 3 x

2-3. BACK PANEL SECTION

CNP502

CNP913

front panel section

CN908

CNP904

CNP501

CN906

three screws

(+BVTP 3 x

three screws

(+BVTP 3 x

CNS505

screw

two screws

(+BVTP 3 x

seven screws

(+BVTP 3 x

three screws

(+BVTP 3 x 8

screws

(+BVTP 3 x

back panel section

CNP203

CNS250

CNP503

connector

2-4. DIGIT AL BOARD

screw

(+BVTP 3 x

CNP507

CNP510

CNP506

DIGITAL board

CNP501

CNP500

bracket (digital)

STR-DE597

2-5. ST ANDBY BOARD

three screws

(+BV SUMITITE (B3))

CNP903

CNP902

CNP804

CNP915

screw

(+BVTP 3 x

STANDBY board

STR-DE597

2-6. MAIN BOARD

screw

(+BV SUMITITE (B3))

two screws

(+BV SUMITITE (B3))

CNP915

CNP802

CN912

two screws

(+BV SUMITITE (B3))

two screws

(+BV SUMITITE (B3))

MAIN board

2-7. SB AMP BOARD

SB AMP board

CN572

bracket (SUR)

two screws

(+BVTP 3 x

bracket (SUR)

CN574

three screw

(transistor)

SECTION 3

TEST MODE

STR-DE597

FACTORY PRESET MODE

* All preset contents are reset to the default setting.
* Procedure:

While depressing the [FM MODE] and the [DISPLAY] buttons
simultaneously, press the

?/1 button to turn on the main power .

The message “FA CT OR Y” appears for a moment and the present
contents are reset to the default values.

AM CHANNEL STEP 9 kHz/10 kHz SELECTION
MODE (US, Canadian, E2 model only)

* Either the 9 kHz step or 10 kHz step can be selected for the AM

channel step.

* Procedure:

Press the [TUNER FM/AM] button to set AM and press the ?/1
button to turn off the main power.
While depressing the [PRESET TUNING +] button or the
[TUNING +] button, press the ?/1 button to turn on the main
power.
Either the message “9k STEP” or “10k STEP” appears for a
moment and select the desired step.

SPEAKER SIZE SELECTION MODE

* Either the normal speaker or micro satellite speaker can be se-

lected.

* Procedure:

While depressing the [DIMMER] button, press the ?/1 button to
turn on the main power.
Either the message “NORM. SP .” or “MICRO SP . ” appear s for a
moment and select the desired speaker size.

FLUORESCENT INDICATOR TUBE TEST MODE

* All fluorescent segments are tested.

When this test is activated, all segments light on at the same
time, then each segment lights on one after another.

* Procedure:

While depressing the [TUNING —] and the [SPEAKERS $OFF/A/
B/A+B%] buttons simultaneously , press the
the main power.

1. ALL segments light on.

SP A

LFE

SL S SR

SBL SB SBR

SP B SLEEP OPT COAX MULTI CH IN 96/24

DIGITALEX PRO LOGIC II x DTS-ES NEO:6 MPEG-2 AAC RDS

[2CH], [A.F.D.], [MOVIE], [MUSIC] and [MULTI CHANNEL DECODING] LED light on.

2. Press the [VIDEO 1] button, confirm display.

SP A

LFE

LSWR

SP B SLEEP OPT COAX MULTI CH IN 96/24

DIGITALEX PRO LOGIC II x DTS-ES NEO:6 MPEG-2 AAC RDS

[A.F.D.] and [MUSIC] LED light on.

?/1 button to turn on

MEMORY

kHz
mft.

MHz

kHz
mft.
MHz

DIRECT

MEMORY

DIRECT

D.RANGE EQ STEREO MONO

4. Press the [VIDEO 1] button, all segments and all LEDs light off.

5. Every pressing the [VIDEO 1] button turns on each segment and
LED one after another in the same order.
(Not only the [VIDEO 1] button, b ut also the other b uttons such
as [VIDEO 2], [DVD], [MD/TAPE], [SA-CD/CD] and [TUNER FM/
AM] can be used.)

SOUND FIELD CLEAR MODE

* The preset sound field is cleared when this mode is activated.

Use this mode before returning the product to clients upon
completion of repair.

* Procedure:

While depressing the [2CH] button, press the ?/1 button to turn
on the main power.
The message “SF. CLR.” appears for a moment and initialization is performed.

SOFTWARE VERSION DISPLAY MODE

* The software version is displayed.
* Procedure:

While depressing the [TUNING —] and the [DISPLAY] buttons
simultaneously, press the ?/1 button to turn on the main po wer .
The model name, destination and the software version are displayed for a moment.

KEY CHECK MODE

* Button check
* Procedure:

While depressing the [TUNING —] and the [MAIN MENU] buttons
simultaneously, press the ?/1 button to turn on the main po wer .
Either the message “REST 28” appears.
Every pressing of any button other than the

?/1 counts down

the buttons. The buttons which are already counted once are not
counted again. When all buttons are pr essed “REST 00” appears.

AUTOBETICAL MODE (AEP, UK model only)

* When this mode is used, the receiver scans the broadcasts that

can be received by the tuner, and sets up the broadcasts.
Be sure to start scanning after connecting the antenna.

* Procedure:

Check that the antenna is connected.
While depressing the [MEMORY] button, press the ?/1 button
to turn on the main power.
The message “AUTO-BETICAL SELECT” appears for a moment and the receiver starts scanning.

COMMAND MODE SELECTION MODE

* The command mode (AV1 or AV2) of the remote commander

can be selected.

* Procedure:

While depressing the [ENTER] button, press the ?/1 button to
turn on the main power.
Either the message “C.MODE.AV 1” or “C.MODE.AV 2” appears for a moment and select the desired mode.

3. Press the [VIDEO 1] button, confirm display.

SP A

DIGITALEX PRO LOGIC II x DTS-ES NEO:6 MPEG-2 AAC RDS

D.RANGE EQ STEREO MONO

kHz
mft.
MHz

SL SR

SBL SBR

SP B SLEEP OPT COAX MULTI CH IN 96/24

[2CH], [MOVIE] and [MULTI CHANNEL DECODING] LED light
on.

MEMORY

DIRECT

STR-DE597

SECTION 4
DIAGRAMS

4-1. IC PIN DESCRIPTIONS

• IC1501 CXD9718Q (DSP) (DIGITAL Board (2/3))

Pin No. Pin Name I/O Pin Description

1 VSS — Ground
2 XRST I Reset signal input from SYSTEM CONTROL IC
3 EXTIN I Not used (Connect to ground)
4 LRCKI3 I Not used (Connect to ground)
5 VDDI I Power supply pin (+2.6 V)
6 BCKI3 I Not used (Connect to ground)
7 PLOCK O Not used (Open)
8 VSS — Ground

9 MCLK1 I Clock signal input (13.5 MHz)
10 VDDI I Power supply pin (+2.6 V)
11 VSS — Ground
12 MCLK2 O Clock signal output (13.5 MHz)
13 MS I Not used (Fixed at L)
14 SCKOUT O Internal system clock signal output for 2CH/6CH DAC IC
15 LRCKI1 I Sampling clock signal input from ADC IC
16 VDDE I Power supply pin (+3.3 V)
17 BCKI1 I Bit clock signal input from ADC IC
18 SDI1 I Audio IF data input from ADC IC
19 LRCKO O Sampling clock signal output for 2CH/6CH DAC IC
20 BCKO O Bit clock signal output for 2CH/6CH DAC IC
21 VSS — Ground
22 KFSIO I/O Audio clock signal (384fs/256fs) input/output for DIR IC

23 to 25 SDO1 to SDO3 O Digital audio serial data output for 6CH DAC IC

26 SDO4 O Digital audio serial data output for 2CH DAC IC
27 SPDIF O Not used (Open)
28 LRCKI2 I Sampling clock signal input from ADC IC
29 BCKI2 I Bit clock signal input from ADC IC
30 SDI2 I Digital audio serial data input from DIR IC
31 VSS — Ground
32 HACN O Acknowledge signal output for SYSTEM CONTROL IC
33 HDIN I Serial data input from SYSTEM CONTROL IC
34 HCLK I Clock signal input from SYSTEM CONTROL IC
35 HDOUT O Serial data output for SYSTEM CONTROL IC
36 HCS I Chip select signal input from SYSTEM CONTROL IC
37 GP12 I GP12 signal input from SYSTEM CONTROL IC

38, 39 GP13, GP14 O Not used (Open)

40 VDDI I Power supply pin (+2.6 V)
41 VSS — Ground
42 GP15 O Not used (Open)
43 OE0 O Not used (Open)
44 CS0 O External memory chip select signal output for D/A converter IC (SRAM)
45 WE0 O SRAM write enable signal output for D/A converter IC
46 VDDE I Power supply pin (+3.3 V)
47 WMD1 I Not used (Fixed at H)
48 VSS — Ground
49 WMD0 I Not used (Fixed at H)
50 PAGE2 O Not used (Open)
51 VSS — Ground

52, 53 PAGE1, PAGE0 O Not used (Open)

54 BOOT I Not used (Connect to ground)
55 TST1 O Not used (Open)

STR-DE597

Pin No. Pin Name I/O Pin Description

56 BST I Boot stop signal input from SYSTEM CONTROL IC
57 MOD1 I Operation mode signal input (L: 386fs, H: 256fs) (Fixed at H)
58 MOD0 I Operation mode signal input (L: single chip mode, H: use prohibited) (Fixed at L)
59 EXLOCK I Error detection signal input from DIR IC
60 VDDI I Power supply pin (+2.6 V)
61 VSS — Ground

62, 63 A17, A16 O Not used (Open)

64 to 66 A15 to A13 O External memory address signal output for D/A converter IC (SRAM)

67 GP10 O Not used (Open)
68 GP9 O GP9 signal output for SYSTEM CONTROL IC
69 GP8 I Audio signal input from DIR IC
70 VDDI I Power supply pin (+2.6 V)
71 VSS — Ground

72 to 75 D15/GP7 to D12/GP4 I/O External memory data input/output for D/A converter IC (general port)

76 VDDE I Power supply pin (+3.3 V)

77 to 80 D11/GP3 to D8/GP0 I/O External memory data input/output for D/A converter IC (general port)

81 VSS — Ground
82 A9 O External memory address signal output for D/A converter IC (SRAM)

83 to 85 A12 to A10 O External memory address signal output for D/A converter IC (SRAM)

86 TDO O Not used (Fixed at H)
87 TMS I Not used (Fixed at H)
88 XTRST I Not used (Fixed at H)
89 TCK I Not used (Fixed at H)
90 TDI I Not used (Fixed at H)
91 VSS — Ground

92 to 97 A8 to A3 O External memory address signal output for D/A converter IC (SRAM)

98, 99 D7, D6 I/O External memory data input/output for D/A converter IC (SRAM)

100 VDDI I Power supply pin (+2.6 V)
101 VSS — Ground

102 to 105 D5 to D2 I/O External memory data input/output for D/A converter IC (SRAM)

106 VDDE I Power supply pin (+3.3 V)
107, 108 D1, D0 I/O External memory data input/output for D/A converter IC (SRAM)
109, 110 A2, A1 O External memory address signal output for D/A converter IC (SRAM)

111 VSS — Ground

112 A0 O External memory address signal output for D/A converter IC (SRAM)

113 PM I PLL initialization signal input from SYSTEM CONTROL IC
114, 115 SDI3, SDI4 I Not used (Open)

116 SYNC I Sync/async select signal input (L: sync, H: async) (Fixed at H)

117 TST2 I Not used (Connect to ground)

118 GP11 I Not used (Connect to ground)

119 TST3 I Not used (Connect to ground)

120 VDDI I Power supply pin (+2.6 V)

STR-DE597

• IC1101 MB90478PF-G-183-BND (SYSTEM CONTROL) (DIGITAL Board (3/3))

Pin No. Pin Name I/O Pin Description

1DATAO I Serial data line signal input from DIR IC
2GP9 I GP9 signal input from DSP IC
3 BST O Boot stop control signal output for DSP IC
4 HCS O Chip select signal output for DSP IC
5HACNIAcknowledge signal input from DSP IC
6 XRST O Reset signal output for DSP IC
7PMOPLL control signal output for DSP IC
8 GP12 O GP12 signal output for DSP IC

9 AK5380_PDN O Power down signal output for ADC IC
10 AK4355_CSN O Chip select signal output for 6CH DAC IC
11 VSS — Ground
12 AK4355_PDN O Power down signal output for 6CH DAC IC
13 AK4381_PDN O Power down signal output for 2CH DAC IC
14 AK4381_CSN O Chip select signal output for 2CH DAC IC
15 AK4355_CLK O Clock signal output for 2CH/6CH DAC IC

18 HDOUT I Serial data input from DSP IC
19 HDIN O Serial data output for DSP IC
20 HCLK O Serial data clock signal output for DSP IC
21 AK4355_CDT1 O CDT1 signal output for 2CH/6CH DAC IC
22 VOL_LATCH O Latch signal output for FUNCTION SELECT IC
23 VCC5 — Power supply pin (+3.3 V)
24 SYS_MUTE O System mute control signal output
25 ANA/DIG O Muting and error port signal output
26 FL_CLEAR O Not used (Open)
27 FLASH2 — Flash programming signal output 2
28 FLASH1 — Flash programming signal output 1

29, 30 ENC_A, ENC_B — Not used (Fixed at L)
31, 32 F_A, F_B — Not used (Fixed at L)

33 SCL O Clock signal output for EEPROM IC
34 SDA I/O Serial data input/output for EEPROM IC
35 AVCC — Power supply pin (+3.3 V)
36 AVRH — Power supply pin (+3.3 V)
37 AVSS — Ground

38 to 40 A/D0 to A/D2 I Key signal input (A/D port)

41 VERSION I

42 VSS — Ground
43 RDS_SIG I RDS signal level input (AEP, UK model only)
44 MODEL I Model detection signal input
45 VOL_ENC (A) I Volume encoder (A) signal input
46 VOL_ENC (B) I Volume encoder (B) signal input
47 BLUE_LED O LED (MULTI CHANNEL DECODING) driver signal output
48 STOP I AC off detection signal input
49 MOD0 — Selection of micon operation mode
50 MOD1 — Not used (Connect to AVCC)
51 MOD2 — Selection of micon operation mode
52 RDS_CLK I RDS data clock signal input (AEP, UK model only)
53 RDS_DATA I RDS data input (AEP, UK model only)

(VOL_TUNER_TC9273)

IC_CLK

IC_DATA

O Clock signal output for FUNCTION SELECT IC and tuner pack

O Serial data signal output for FUNCTION SELECT IC and tuner pack

Destination detection signal input
(Fixed at L: US, Canadian model, H: Except for US, Canadian model)

STR-DE597

DIGITAL board

POWER board

STANDBY board

AC SELECT board
(E2 model only)

BRIDGEABLE board

VIDEO board

SB AMP board

SPEAKER board

MAIN board

TUNING board

HEADPHONE board

DISPLAY board

Pin No. Pin Name I/O Pin Description

54 SIRCS I SIRCS signal input
55 HP_DETECT I Headphones detection signal input
56 POWER_KEY I Power key detection signal input
57 FL_LAT O Latch signal output for FL driver IC
58 POWER_RY O Power relay driver control signal output
59 FL_DATA O Serial data output for FL driver IC
60 FL_CLK O Clock signal output for FL driver IC
61 PROTECTOR I Protector detection signal input
62 HP_RY O Headphones relay driver control signal output
63 FUSE_DETECT I Fuse open detection signal input
64 A1_OUT O Not used (Fixed at L)
65 A1_IN I Not used (Fixed at L)
66 FRONT_RY O Front speaker A relay driver control signal output
67 SP_B_RY O Front speaker B relay driver control signal output
68 C_RY O Center speaker relay driver control signal output
69 REAR_RY O Surround speaker relay driver control signal output
70 SW_RY O Sub woofer relay driver control signal output
71 NC — Not used (Fixed at L)
72 BRIDGEABLE_RY O Bridgeable relay driver control signal output
73 D0 I Tuner serial data input
74 SLATCH O Tuner latch signal output
75 TUNED I Tuned signal detection input
76 STEREO I Stereo signal detection input
77 RSTX I Reset signal input
78 MUTE O Tuner mute signal output
79 X1A — Not used (Open)
80 X0A — Not used (Connect to VSS)
81 VSS — Ground
82 X0 — Clock signal input (16 MHz)
83 X1 — Clock signal output (16 MHz)
84 VCC3 — Power supply pin (+3.3 V)
85 GROUPING_SW — Not used (Open)

86 to 89 SW1 to SW4 O Video select signal output

90 SELECT2 O Digital input select 2 signal output
91 SELECT1 O Digital input select 1 signal output
92 BST_SEL O 96/24 signal output for DSP IC
93 XMODE O Xmode signal output for DIR IC
94 CKSEL1 O Clock select signal output for DIR IC
95 CLK O Data clock signal output for DIR IC
96 CE O Latch signal output for DIR IC
97 DI O Data output for DIR IC
98 DO I Data input from DIR IC
99 ERROR I Error detection signal input from DIR IC

100 XSTATE I Xstate signal input from DIR IC

4-2. CIRCUIT BOARDS LOCA TION

15 15

STR-DE597

4-3. BLOCK DIAGRAM — TUNER/AUDIO SECTION —

AEP,UK MODEL

EXCEPT

AEP,UK MODEL

ANTENNA

TN1

FM/AM TUNER UNIT

FM 75Ω

COAXIAL

TU+10V

TU+3.3V

3.3V

(STBY)

J401

-1 -2 -3 -4 -5 -6

FRONT

RDS DATA

RDS INT

FM SIG OUT

MUTING

R-CH

SURROUND

MULTI CH IN

L-CH

R-CH

STEREO

TUNED

DATA

CLOCK

R-CH

CENTER

3.3V

SA-CD/CDINMD/TAPE

J402 J403 J404

R-CH

SUB

WOOFER

R-CH

53
52
43

76
75
78

74
73

OUT

RDS DATA
RDS CLK
RDS SIG

STEREO
TUNED
MUTE

S LATCH
DO

SW RY

R-CH

IC.DATA

IC.CLK

VOL LATCH

SYSTEM

CONTROL

IC1101 (1/4)

MD/TAPEINDVD AUDIO

LRLR

-1 -2 -3 -4-1 -2 -3 -4

16
17
22

R-CH

DIR

FUNCTION SELECT

SW
SEL

IC401

SEL

R-CH

R-CH
R-CH

DIGITAL

SECTION

(Page 17)

SEL
SW

MCU

I/F

56
53

R-CH

SBL OUT

SW OUT

C OUT

SL OUT

L OUT

SBL
SEL

R-CH

15 11 12 13 10

REG

Q471

21 24 22

DVDD

R-CH

+7V

+7V-7V

AVCCAVEE

67
70
69

Q379

VIDEO 1

AUDIO OUT AUDIO INAUDIO IN

-3 -4 -5 -6

MUTE

Q300,310

MUTE

Q320,330

MUTE

Q350

MUTE

Q340

MUTE

Q360

SYSTEM MUTE

VIDEO 2

RLR

-1 -2

L-CH

R-CH

FL-CH

FR-CH

SL-CH

SR-CH

C-CH

SB-CH

5 7

SUB WOOFER

AMP

IC402

DIGITAL

SECTION

(Page 17)

RELAY

DRIVER

Q560

DIGITAL

SECTION

(Page 17)

POWER

SECTION

(Page 20)

J309

RY560

AUDIO

OUT

SUB

WOOFER

• Signal path
: TUNER (FM/AM)
: VIDEO (AUDIO)

• R-ch is omitted due to
same as L-ch.

1616

4-4. BLOCK DIAGRAM — DIGIT AL SECTION —

STR-DE597

DIGITAL

TUNER/

AUDIO

SECTION

(Page 16)

DVD

(COAXIAL)

SA-CD/CD

(OPTICAL)

VIDEO 2

(OPTICAL)

J1301

IC1354

IC1351

OUT

A/D

CONVERTER

BPSYNC

LPF

CKSEL1

IC1401

MCLK

XMCK

DETECTION

XSTATE

AUDIO

XMODE

DSP

IC1501

SDTO

LRCK

SCLK

PDN

10
12

D1301

9 18

+2.5V

VDDI

+3.3V

VDDE

I/F

AUDIO

CKOUT

13 22

BCK

14 29

LRCK

15 28

DATAO

16 30

ERROR

34 59

SDI1 SD01

GP8

KFSI0

BCKI2

LRCKI2

SDI2

LRCKI1

BCKI1

EXLOCK

GP12

GP9

HACN

HCS

XRST

2 11336 35 33 3432

SD02

SD03

SD04

SCKOUT

LRCKO

BCKO

MCLK1

MCLK2

CSO

WEO

BST

HDIN

HDOUT

D0-15A0-15

HCLK

44
45

108,107,105 -102,99,

112,110,109,97 — 92,

X1502

13.5MHz

98,80 — 77,75 — 72

85-82,66 — 64

SWITCH

IC1503

MCLK

LRCKO

BCKO

SDRAM

IC1502

D0-15A0-15

16-13,10 — 7

29 — 32,35 — 38,

1 — 5,18 — 21

24 — 27,42 — 44,

LRCKO

MCLK
LRCKO
BCKO
CSN-1
PDN-1
CLK
CDTI

MCLK
LRCKO
BCKO
CSN-2
PDN-2
CLK
CDTI

SDTI3

SDTI1

SDTI2

MCLK

LRCK

BICK

CSN

PDN
CCLK

CDTI

SDTI

MCLK

LRCK

BICK

CSN

PDN

CLK

DTI

AMP

IC1402

L-IN

R-IN

3 7
5

R-CH

IC1303

WAVE

SHAPER

SELECTOR

IC1302

14 2

3 1

X1301

12.288MHz

D1105

DIGITAL AUDIO

I/F RECEIVER

DOUT

DIN2

DIN1

DIN0

XOUT

XIN

+3.3V

Q1105

+5V-2

IC1301

INPUT

VDD

INV.

AINL

A.5V

CLKCEDI

38 37 36 35 33 47 17

ADC

DATA

DEMODULATOR

Pa,Pb DETECTION LOCK

C bit DETECTION

MICROPROCESSOR

I/F

6CH DAC

IC1452

DAC

2CH DAC

IC1451

DAC

LOUT3LOUT3+

ROUT3ROUT3+

LOUT1LOUT1+

ROUT1ROUT1+

LOUT2LOUT2+

ROUT2ROUT2+

OUTLOUTL+

OUTROUTR+

AMP

IC1403

AMP

IC1405

AMP

IC1404

AMP

IC1406

L OUT

R-CH

SL OUT

R-CH

TUNER/

AUDIO

C OUT

SW OUT

SBL OUT

SECTION

(Page 16)

TUNER/

AUDIO

SECTION

(Page 16)

SYSTEM MUTE

Q1103

INV.

Q1104

GATE

D1106

D1103

SYSTEM_MUTE

ERROR

ANA/DIG

95 96 97 98

DIR DI

DIR CE

DIR_CLK

DIR DO

DIR CKSEL1

93100

DIR_XMODE

DIR_XSTATE

SELECT1

SELECT2

DIR_DATAO

AK5380-PDN

GP12

GP9

17 17

HCS1

6 74 18 19 205

HACN1

PM1

XRST1

HDOUT

HDIN

HCLK

BST SEL

SYSTEM

CONTROL

IC1101 (2/4)

CSN-1

BST

PDN-2

PDN-1

CSN-2

AK4355_CSN

AK4381_CSN

AK4355_PDN

CDTI

CLK

211513121410

AK4355_CLK

AK4381_PDN

AK4355_CDTI

• R-ch is omitted due to
same as L-ch.

STR-DE597

4-5. BLOCK DIAGRAM — VIDEO SECTION —

J301 (1/2)

12
13

5
3

2
1

SELECTOR

VIDEO 2

COMPONENT

VIDEO

VIDEO 1

DVD

VIDEO

DVD

B/CB/

R/CR/

B/CB/

R/CR/

VIDEO

-1

-2

-1

B-Y

R-Y

B-Y

R-Y

J201 (1/2)

J200 (1/2)

-4

-5

-6

-1

-2

-3

COMPONENT VIDEO SELECTOR

0X
1X

0Z
1Z

0Y
1Y

VIDEO

IC203

DVD

IC301

BCA

10 9 11

XCOM

ZCOM

YCOM

INH

EXCEPT AEP,UK MODEL

VIDEO AMP

IC302

6dB AMP

Q301

INV.

VIN2

6dB AMP

VIN3

6dB AMP

VIN1

6dB AMP

75Ω

DRIVER

75Ω

DRIVER

75Ω

DRIVER

75Ω

DRIVER

75Ω

DRIVER

VOUT2

VOUT3

VOUT1

V1.OUT

M.OUT

VCC

+5V-3

VEE

-5V-3

V-SW4

V-SW3

VCC

+5V-3

-5V-3

J301 (2/2)

-7

-8

-9

IC807

+5V

3 1

REG

IC804

-5V

3 2

REG

B/CB/

R/CR/

B-Y

R-Y

MONITOR

OUT

+15V

-15V

COMPONENT

VIDEO

J200 (2/2)

J201 (2/2)

-3

VIDEO

OUT

-2

VIDEO

OUT

VIDEO 1

MONITOR

• Signal path
: VIDEO

VEE

SW2

SW3

SW4

V-SW4

SW1

V-SW1

D203,204

10 6 14 2

V-SW2

V-SW3

SW5

-5V-3

V-SW1
V-SW2

V-SW3
V-SW4

V SW1
V SW2

V SW3
V SW4

KEY/DISPLAY

SECTION

(Page 19)

1818

Loading…

Источник

model name1[STR-DE597]

[4-252-271-12(1)]

lename[C:\Data\Sony SEM_Janet\STR-

DE597_Data\J904000_4252271121DE597UCA\4252271121\4252271121DE597UCA\GB01CO
V_STR-DE597-UCA.fm]

masterpage:Right

4-252-271-12(1)

FM Stereo
FM/AM Receiver

Operating Instructions

Owner’s Record

The model and serial numbers are located on the rear of the unit. Record the serial
number in the space provided below. Refer to them whenever you call upon your
Sony dealer regarding this product.

Model No.

Serial No.

STR-DE597

GB01COV_STR-DE597-UCA.book Page 1 Monday, March 8, 2004 12:15 PM

Источник

Характеристики, спецификации

Цвет корпуса:

серебристый, черный

Декодеры:

Dolby Digital, Dolby Digital EX, Dolby Pro Logic, Dolby Pro Logic II, DTS decoder, DTS Neo:6, DTS-ES decoder

Digital Sound Processor (DSP):

есть

Соотношение сигнал/шум:

96 дБ

Разрядность аудио ЦАП:

24 бит

Частота дискретизации аудио ЦАП:

96 кГц

Входное сопротивление:

50 кОм

Диапазон воспроизводимых частот:

30- 15000 Гц

Мощность на канал:

6-канальный режим 100 g

Диапазон принимаемых частот:

AM: 531-1602 КГц, FM: 87.5-108.0 МГц

Количество запоминаемых настроек:

всего — 30

Коэффициент гармоник:

FM моно: 0.30%, FM стерео: 0.50 %

Поддержка технологии «RDS»:

есть

Диапазон регулировки тембра ВЧ:

6 дБ

Диапазон регулировки тембра НЧ:

6 дБ

Потребляемая мощность:

180 Вт

Потребляемая мощность в режиме ожидания:

0.5 Вт

Входы:

5.1CH x 1, коаксиальные x 1, композитные x 3, линейные x 5, оптические x 2

Выходы:

композитные x 2, линейные x 2, наушники x 1, выходы на сабвуфер x 1

Тип разъема для подключения наушников:

6.3 мм

Варианты работы селектора акустических комплектов:

A/B, A+B

Размеры:

430 x 145 x 298 мм

lename[E:\SEM_Janet\Data_STR—

model name1[STR—DE597]

[4-255-413-31(1)]

masterpage:Right

E597\J903000_4255413311DE597CEL_RU\4255413311\RU01COV_STR-DE597-CEL.fm]

4-255-413-31(1)

FM Stereo

FM/AM Receiver

Инструкция по эксплуатации

STR-DE597

lename[E:\SEM_Janet\Data_STR—

masterpage:Left

E597\J903000_4255413311DE597CEL_RU\4255413311\RU02REG_STR-DE597-CEL.fm]

ПРЕДУПРЕЖДЕНИЕ

Во избежание пожара или поражения

электрическим током нельзя

подвергать аппарат воздействиям

дождя и влаги.

Во избежание пожара нельзя закрывать

вентиляционное отверстие аппарата газетой,

скатертью, шторой и т.п. Также нельзя ставить

зажженную свечу на аппарат.

Во избежание пожара или поражения

электрическим током нельзя ставить вазу и

другую посуду, наполненную жидкостью, на

аппарат.

Нельзя устанавливать аппарат в тесных

местах, например, в книжном шкафу или

углублении в стенке.

Отработанные батарейки не

следует выбрасывать вместе с

другими домашними

отходами; их следует

выбрасывать как химические

отходы.

model name1[STR-DE597]

[4-255-413-31(1)]

lename[E:\SEM_Janet\Data_STR—

masterpage:Right

E597\J903000_4255413311DE597CEL_RU\4255413311\RU02REG_STR-DE597-CEL.fm]

О Настоящем Руководстве

• Настоящее руководство содержит

инструкции к моделям STR-DE597.

Проверьте номер вашей модели, указанный в

нижнем правом углу передней панели.

• В настоящем руководстве описаны органы

управления, размещенные на ресивере. Вы

также можете воспользоваться органами

управления, расположенными на

поставляемом с ресивером пульте ДУ, если

они имеют одинаковые или подобные

наименования, как на самом ресивере.

Подробнее об использовании вашего пультa

ДУ см. стр. 47–51.

О региональных кодах

Региональный код приобретенного вами

ресивера указан на нижней части задней

панели (смотрите приведенный ниже

рисунок).

SURROUND BACK

–

CENTER

FRONT A

+ +

–

SURROUND

AC OUTLET

4-XXX-XXX-XX AA

Региональный код

Любые различия в управлении в

соответствии с отдельными региональными

кодами ясно указаны в тексте, например

“Только для моделей с кодом региона AA”.

Настоящий ресивер оснащен системами Dolby*

Digital и Pro Logic Surround и DTS** Digital

Surround System.

* Изготовлено по лицензии компании Dolby

Laboratories.

“Долби”, “Pro Logic” и знак в виде двойной

буквы D являются товарными знаками

компании Dolby Laboratories.

**“DTS”, “DTS-ES”, “Neo:6” и “DTS 96/24”

являются торговыми марками Digital

Theater Systems, Inc.

model name1[STR-DE597]

[4-255-413-31(1)]

lename[E:\SEM_Janet\Data_STR—

masterpage:Left

E597\J903000_4255413311DE597CEL_RU\4255413311\RU01COV_STR-DE597-

ELTOC.fm]

1: Проверка правильности подключения ваших

компонентов

В пунктах 1а – 1c, начиная со стр. 7, изложено, как подключить ваши компоненты к этому

ресиверу. Перед подключением компонентов следует изучить описание “Компоненты,

которые могут быть подключены” для правильного подключения каждого компонента.

По окончании подключения всех ваших компонентов, следует перейти к разделу

“2: Подключение антенн” (стр. 14).

Компоненты, которые могут быть подключены

Подключаемые компоненты Стр.

Проигрыватель DVD

С цифровым аудиовыходом

7–8

С многоканальным аудиовыходом

10–11

Только с аналоговым аудиовыходом

7–8

Телемонитор

С видеовходом для компонентов

8 или 11

Только с композитным видеовходом 13

Спутниковый тюнер

С цифровым аудиовыходом

7–8

Только с аналоговым аудиовыходом

7–8

Проигрыватель Super Audio CD/CD

С цифровым аудиовыходом

С многоканальным аудиовыходом

Только с аналоговым аудиовыходом

MD/Кассетная дека

Только с аналоговым аудиовыходом

Многоканальный декодер 10

Видеомагнитофон 13

Модель с гнездом DIGITAL OPTICAL OUTPUT или DIGITAL COAXIAL OUTPUT и т.п.

Модель с гнездами MULTI CH OUTPUT и т.п. Это соединение используется для вывода

аудиосигналов, декодированных встроенным многоканальным декодером компонента с помощью

этого ресивера.

Модель, оснащенная только гнездами AUDIO OUT L/R и т.п.

Модель с входными видеогнездами (Y, P

/B-Y, P

/R-Y) для подключения компонентов.

продолжение на следующей

model name1[STR-DE597]

[4-255-413-31(1)]

lename[E:\SEM_Janet\Data_STR—

masterpage:Left

E597\J903000_4255413311DE597CEL_RU\4255413311\RU03CON_STR-DE597-CEL.fm]

Необходимые кабели

Схемы соединений компонентов, приведенные на последующих страницах,

предусматривают применение нижеуказанных соединительных кабелей (A–G)

(не прилагаются).

A Аудиокабель

F Монофонический аудиокабель

Белый (

)

Черный

Красный (

)

Совет

B Аудио/видеокабель

Аудиокабель A может разделяться на два

Желтый (видео)

монофонических аудиокабеля F.

Белый (Л/аудио)

Красный (П/аудио)

G Видеокабель для подключения

компонентов

C Видеокабель

(За исключением моделей с кодом

Желтый

области CEL, CEK)

D Оптический цифровой кабель

Зеленый

Голубой

Красный

E Коаксиальный цифровой кабель

Примечания

• Перед выполнением каких-либо соединений следует выключить электропитание всех

компонентов.

• Во избежание возникновения шумов и помех соединения следует выполнить надежно.

• При соединении аудио/видеокабелей следует подключать штекеры к гнездам, имеющим

одинаковую цветовую маркировку на компонентах: желтый (видео) к желтому; белый (левый,

аудио) к белому; и красный (правый, аудио) к красному.

• При подключении оптических цифровых кабелей вставляйте разъемы кабелей до щелчка.

• Не следует сгибать или скручивать оптический кабель.

model name1[STR-DE597]

[4-255-413-31(1)]

Источник

Скачать

Страница из 51

The Sony Guide to

Home Theater

Источник

Руководства по ремонту

1
Инструкции по эксплуатации

5

Языки:

SONY STR-DE597 инструкция по эксплуатации
(64 страницы)

Языки:Русский
Тип:
PDF
Размер:
1.09 MB
Описание:
Ресивер

Просмотр

SONY STR-DE597 инструкция по эксплуатации
(2 страницы)

Языки:Датский, Португальский, Русский, Финский
Тип:
PDF
Размер:
337.62 KB

Просмотр

SONY STR-DE597 инструкция по эксплуатации
(60 страниц)

Языки:Английский, Испанский
Тип:
PDF
Размер:
2.7 MB

Просмотр

SONY STR-DE597 инструкция по эксплуатации
(164 страницы)

Языки:Немецкий, Нидерландский, Шведский
Тип:
PDF
Размер:
5.3 MB

Просмотр

SONY STR-DE597 инструкция по эксплуатации
(2 страницы)

Языки:Итальянский, Польский
Тип:
PDF
Размер:
333.28 KB

Просмотр

На NoDevice можно скачать инструкцию по эксплуатации для SONY STR-DE597. Руководство пользователя необходимо для ознакомления с правилами установки и эксплуатации SONY STR-DE597. Инструкции по использованию помогут правильно настроить SONY STR-DE597, исправить ошибки и выявить неполадки.

Источник

TABLE OF CONTENTS

GENERAL

DISASSEMBLY

case

front panel section

back panel section

DIGITAL board

STANDBY board

MAIN board

SB AMP board

TEST MODE

Характеристики, спецификации

Инструкция по эксплуатации

Оглавление

1: Проверка правильности подключения ваших

компонентов