Sony str dh510 инструкция

Multi Channel AV
Receiver

4-168-043-12(1)

Operating Instructions

STR-DH510

©2010 Sony Corporation

WARNING

To reduce the risk of fire or electric
shock, do not expose this apparatus to
rain or moisture.

To reduce the risk of fire, do not cover the
ventilation opening of the apparatus with
newspapers, tablecloths, curtains, etc. Do not place
the naked flame sources such as lighted candles on
the apparatus.

Do not install the appliance in a confined space, such
as a bookcase or built-in cabinet.

To reduce the risk of fire or electric shock, do not
expose this apparatus to dripping or splashing, and
do not place objects filled with liquids, such as
vases, on the apparatus.

As the main plug is used to disconnect the unit from
the mains, connect the unit to an easily accessible
AC outlet. Should you notice an abnormality in the
unit, disconnect the main plug from the AC outlet
immediately.

Do not expose batteries or apparatus with battery­installed to excessive heat such as sunshine, fire or
the like.

The unit is not disconnected from the mains as long
as it is connected to the AC outlet, even if the unit
itself has been turned off.

Excessive sound pressure from earphones and
headphones can cause hearing loss.

This symbol is intended to alert
the user to the presence of the Hot
Surface that may be hot if it is
touched during the normal
operation.

For customers in the United
States

Owner’s Record

The model and serial numbers are located on the rear
of the unit. Record these numbers in the space
provided below. Refer to them whenever you call
upon your Sony dealer regarding this product.
Model No.

This symbol is intended to alert the
user to the presence of uninsulated
“dangerous voltage” within the
product’s enclosure that may be of
sufficient magnitude to constitute a
risk of electric shock to persons.
This symbol is intended to alert the
user to the presence of important
operating and maintenance
(servicing) instructions in the
literature accompanying the
appliance.

Serial No.

Important Safety Instructions

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.

8) Do not install near any heat sources such as
radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.

9) Do not defeat the safety purpose of the polarized
or grounding-type plug. A polarized plug has
two blades with one wider than the other. A
grounding type plug has two blades and a third
grounding prong. The wide blade or the third
prong are provided for your safety. If the
provided plug does not fit into your outlet,
consult an electrician for replacement of the
obsolete outlet.

10)Protect the power cord from being walked on or
pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.

11)Only use attachments/accessories specified by
the manufacturer.

GB

2

12)Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with
the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to
avoid injury from tip-over.

13)Unplug this apparatus during lightning storms or
when unused for long periods of time.

14)Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has
been damaged in any way, such as power-supply
cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.

CAUTION

You are cautioned that any changes or modifications
not expressly approved in this manual could void
your authority to operate this equipment.

To reduce the risk of electric shock, the speaker cord
should be connected to the apparatus and the
speakers in accordance with the following
instructions.

1) Disconnect the AC power cord from the MAINS.

2) Strip 10 to 15 mm of the wire insulation of the
speaker cord.

3) Connect the speaker cord to the apparatus and
the speakers carefully so as not to touch the core
of speaker cord by hand. Also disconnect the AC
power cord from the MAINS before
disconnecting the speaker cord from the
apparatus and the speakers.

The following FCC statement
applies only to the version of
this model manufactured for
sale in the U.S.A. Other
versions may not comply with
FCC technical regulations.

NOTE:

This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However,
there is no guarantee that interference will not occur
in a particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to try
to correct the interference by one or more of the
following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment

and receiver.

– Connect the equipment into an outlet on a circuit

different from that to which the receiver is
connected.

– Consult the dealer or an experienced radio/TV

technician for help.

For customers in Europe

Disposal of Old Electrical &
Electronic Equipment
(Applicable in the European
Union and other European
countries with separate
collection systems)

This symbol on the product or on its packaging
indicates that this product shall not be treated as
household waste. Instead it shall be handed over to
the applicable collection point for the recycling of
electrical and electronic equipment. By ensuring this
product is disposed of correctly, you will help
prevent potential negative consequences for the
environment and human health, which could
otherwise be caused by inappropriate waste
handling of this product. The recycling of materials
will help to conserve natural resources. For more
detailed information about recycling of this product,
please contact your local Civic Office, your
household waste disposal service or the shop where
you purchased the product.

continued

GB

3

Disposal of waste batteries
(applicable in the European
Union and other European
countries with separate
collection systems)

This symbol on the battery or on the packaging
indicates that the battery provided with this product
shall not be treated as household waste.
On certain batteries this symbol might be used in
combination with a chemical symbol. The chemical
symbols for mercury (Hg) or lead (Pb) are added if
the battery contains more than 0.0005% mercury or

0.004% lead.
By ensuring these batteries are disposed of correctly,
you will help prevent potentially negative
consequences for the environment and human health
which could otherwise be caused by inappropriate
waste handling of the battery. The recycling of the
materials will help to conserve natural resources.
In case of products that for safety, performance or
data integrity reasons require a permanent
connection with an incorporated battery, this battery
should be replaced by qualified service staff only.
To ensure that the battery will be treated properly,
hand over the product at end-of-life to the applicable
collection point for the recycling of electrical and
electronic equipment.
For all other batteries, please view the section on
how to remove the battery from the product safely.
Hand the battery over to the applicable collection
point for the recycling of waste batteries.
For more detailed information about recycling of
this product or battery, please contact your local
Civic Office, your household waste disposal service
or the shop where you purchased the product.

For customers in Australia

Disposal of Old Electrical &
Electronic Equipment
(Applicable in the European
Union and other European
countries with separate
collection systems)

Notice for customers: The following
information is only applicable to
equipment sold in countries applying
EU Directives.

The manufacturer of this product is Sony
Corporation, 1-7-1 Konan Minato-ku Tokyo,
108-0075 Japan. The Authorized Representative for
EMC and product safety is Sony Deutschland
GmbH, Hedelfinger Strasse 61, 70327 Stuttgart,
Germany. For any service or guarantee matters
please refer to the addresses given in separate
service or guarantee documents.

GB

4

About This Manual

• The instructions in this manual are for model
STR-DH510. Check your model number by
looking at the lower right corner of the front panel.

• In this manual, models of area code ECE is used
for illustration purposes unless stated otherwise.
Any difference in operation is clearly indicated in
the text, for example, “Models of area code ECE
only”.

• The instructions in this manual describe the
controls on the supplied remote. You can also use
the controls on the receiver if they have the same
or similar names as those on the remote.

About area codes

The area code of the receiver you purchased is
shown on the lower right portion of the rear panel
(see the illustration below).

On Copyrights

This receiver incorporates Dolby* Digital and Pro
Logic Surround and the DTS** Digital Surround
System.
* Manufactured under license from Dolby

Laboratories. Dolby, Pro Logic, and the double­D symbol are trademarks of Dolby Laboratories.

** Manufactured under license under U.S. Patent

#’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762;
6,487,535 & other U.S. and worldwide patents
issued & pending. DTS and DTS Digital
Surround are registered trademarks and the DTS
logos and Symbol are trademarks of DTS, Inc.
© 1996-2008 DTS, Inc. All Rights Reserved.

This receiver incorporates High-Definition
Multimedia Interface (HDMI
HDMI, the HDMI Logo, and High-Definition
Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing LLC in the United
States and other countries.

TM

) technology.

FRONT

SURROUNDCENTER

LLR

R

SPEAKERS

4-XXX-XXX-XX (X) AA

Area code

Any differences in operation, according to the area
code, are clearly indicated in the text, for example,
“Models of area code AA only”.

“x.v.Colour (x.v.Color)” and “x.v.Colour
(x.v.Color)” logo are trademarks of Sony
Corporation.

“BRAVIA” is a trademark of Sony Corporation.

“PLAYSTATION” is a trademark of Sony
Computer Entertainment Inc.

GB

5

Table of Contents

About This Manual………………………………….5

Supplied accessories………………………………..7

Description and location of parts……………….8

Connections

1: Installing the speakers ………………………..17

2: Connecting the speakers……………………..19

3: Connecting the TV …………………………….20

4a: Connecting the audio components………22

4b: Connecting the video components ……..23

5: Connecting the antennas (aerials)…………29

6: Connecting the AC power cord

(mains lead) ……………………………………..29

Preparing the Receiver

Initializing the receiver…………………………..30

Calibrating the appropriate speaker

settings automatically

(AUTO CALIBRATION)…………………..30

(Models of area code ECE, CEK, AU1
only)

Adjusting the speaker levels

(TEST TONE) ………………………………….34

Basic Operations

Playback ………………………………………………35

Viewing information on the display …………36

Using the Sleep Timer ……………………………37

Recording ……………………………………………. 37

Enjoying Surround Sound

Selecting the sound field……………………….. 42

Enjoying the surround effect at low

volume levels (NIGHT MODE) ………… 46

Resetting sound fields to the initial

settings …………………………………………… 46

“BRAVIA” Sync Features

What is “BRAVIA” Sync? …………………….. 47

Preparing for the “BRAVIA” Sync …………. 47

Playing back components with one-touch

operation (One-Touch Play)………………. 48

Enjoying the TV sound from the speakers

connected to the receiver

(System Audio Control)……………………. 49

Turning off the receiver with the TV

(System Power Off) …………………………. 50

Enjoying movies with the optimum sound

field (Theater/Theatre Mode Sync)…….. 51

Enjoying the TV sound via an HDMI

cable (Audio Return Channel) …………… 51

Advanced Operations

Switching between digital and analog

audio (INPUT MODE) …………………….. 52

Enjoying the sound from other inputs……… 53

Enjoying sound/images from the

components connected to the DIGITAL

MEDIA PORT ………………………………… 55

Using the setting menu …………………………. 55

Tuner Operations

Listening to FM/AM radio ……………………..38

Presetting FM/AM radio stations …………….40

Using the Radio Data System (RDS) ……….42

(Models of area code ECE, CEK, AU1
only)

GB

6

Using the Remote

Changing the input button assignments …… 66

Clearing all the contents of the remote’s

memory ………………………………………….. 67

Additional Information

Glossary ……………………………………………… 67

Precautions ………………………………………….. 69

Troubleshooting …………………………………… 70

Specifications ………………………………………. 75

Index…………………………………………………… 77

Supplied accessories

• Operating Instructions (this manual)

• Quick Setup Guide

• FM wire antenna (aerial) (1)

• AM loop antenna (aerial) (1)

• Remote commander (1)
– RM-AAU071 (Models of area code U2,

CA2 only)

– RM-AAU074 (Models of area code ECE,

CEK, AU1 only)

• R6 (size-AA) batteries (2)

• Optimizer microphone (ECM-AC2)
(Models of area code ECE, CEK, AU1 only)
(1)

GB

7

Description and location of parts

Front panel

?/1

PHONES

INPUT SELECTOR

INPUT MODE

TUNING MODE

MEMORY/

TUNING

2CH/

A.DIRECT

A.F.D.

ENTER

54312

MASTER VOLUME

MUSIC

MOVIE

DISPLAY DIMMER

MUTING

qs

A ?/1 (on/standby) (page 30, 39, 46, 67)

B INPUT SELECTOR (page 35)

C Display (page 9)

D Remote sensor

Receives signals from remote commander.

E MASTER VOLUME (page 34, 35)

F MUTING (page 35)

G DIMMER (page 65)

H DISPLAY (page 36)

I 2CH/A.DIRECT, A.F.D., MOVIE, MUSIC

(page 42)

J TUNING MODE, TUNING +/–, MEMORY/

ENTER (page 38)

K INPUT MODE (page 52)

L PHONES jack (page 71)

89q;qa

67

GB

8

Indicators on the display

1234 56

LC

SL S

R

SR

COAX OPT LPCM

HDMI DTS

LFE

SW

Indicator and explanation

A Playback channel indicators

The letters (L, C, R, etc.) indicate the channels
being played back. The boxes around the letters
vary to show how the receiver downmixes or
upmixes the source sound (based on the speaker
settings).

SW
L
R
C
SL
SR
S

B

LFE

Lights up when the disc being played back
contains an LFE (Low Frequency Effect)
channel and the LFE channel signal is actually
being reproduced.

Subwoofer
Front Left
Front Right
Center (monaural)
Surround Left
Surround Right
Surround (monaural or the
surround components
obtained by Pro Logic
processing)

Example:

Speaker pattern: 3/0.1
Recording format: 3/2.1
Sound Field: A.F.D. AUTO

SW

LC

R

SL

SR

LFE

PL II
D

D.RANGEST

RDS

q; 9 8

Indicator and explanation

C Input indicators

Light up to indicate the current input.

HDMI

Lights up when
– INPUT MODE is set to AUTO and the

receiver recognizes a component connected
via an HDMI IN jack (page 23, 52).

– TV input detected Audio Return Channel

(ARC) signals (page 51).

COAX

Lights up when input mode is set to “AUTO” or
“COAX” and the source signals is a digital
signal being input through the COAXIAL jack
(page 52).

OPT

Lights up when input mode is set to “AUTO” or
“OPT” and the source signals is a digital signal
being input through the OPTICAL jack (page

52).

D DTS

Lights up when the receiver is decoding DTS
signals.

Note

When playing a DTS format disc, be sure that
you have made digital connections and that
INPUT MODE is set to “AUTO” (page 52).

E Dolby Pro Logic indicators

Lights up one of the respective indicators when
the receiver performs Dolby Pro Logic
processing. This matrix surround decoding
technology can enhance input signals.

PL
PL II

Note

These indicators do not light up when the center
speaker and surround speaker is not selected.

Dolby Pro Logic
Dolby Pro Logic II

continued

SLEEP

7

9

GB

Indicator and explanation

F SLEEP

Lights up when the sleep timer is activated (page
37, 65).

G D.RANGE

Lights up when dynamic range compression is
activated (page 59).

H Tuning indicators

Lights up when the receiver tunes in radio
stations.

ST

Stereo broadcast

RDS (Models of area code ECE, CEK,
AU1 only)

A station that provides RDS services is tuned in.

Preset station number

Note

The preset station number will change
according to the preset station you select.
For details on presetting radio stations, see page

40.

I D

Lights up when the receiver is decoding Dolby
Digital signals.

Note

When playing a Dolby Digital format disc, be
sure that you have made digital connections and
that INPUT MODE is not set to “ANALOG”
(page 52).

J LPCM

Lights up when Linear PCM signals are
detected.

10

GB

Rear panel

1

IN

TV

OPTICAL

SAT/
CATV

IN

OPTICAL

DVD

IN

COAXIAL

(ASSIGNABLE)

DIGITAL

DC5V

0.7A MAX

DMPORT

6 5

32 1, 2

AM

DVD IN BD IN SAT/CATV IN TV OUT

VIDEO

VIDEO

IN

IN

MONITOR

OUT

DVD

AUDIOINAUDIOINAUDIO

SAT/CATV

TV

AUTO CAL

MIC

Y

P

B

/

B

C

PR/

R

C

SAT/CATV IN

ANTENNA

DVD IN

COMPONENT VIDEO

IN

L

R

SA-CD/CD

1

HDMI

VIDEO

VIDEO

VIDEO

OUT

OUT

IN

MONITOR

AUDIO

AUDIO

AUDIO

OUT

IN

OUT

VIDEO

SUBWOOFER

A Audio signal section

DIGITAL INPUT/OUTPUT jacks (page 20,
23, 26, 27)

HDMI IN/OUT

OPTICAL IN

COAXIAL IN

ANALOG INPUT/OUTPUT jacks (page 19,
20, 22, 27)

White (L)

Red (R)

Black

AUDIO
IN/OUT

AUDIO OUT

ARC

SURROUNDCENTER

LLR

SPEAKERS

4

B Video signal section*

The image quality depends on the connecting
jack.

DIGITAL INPUT/OUTPUT
jacks (page 20, 23)

HDMI IN/OUT

COMPONENT VIDEO
INPUT/OUTPUT jacks (page
20, 26, 27)

Green
(Y)

Blue

B/CB)

(P

Red

R/CR)

(P

COMPOSITE VIDEO INPUT/
OUTPUT jacks (page 20, 26,
27, 28)

FRONT

R

Y, PB/CB, PR/CR
IN/OUT

High

quality

image

Yellow

VIDEO IN/OUT

continued

11

GB

C ANTENNA section (page 29)

FM ANTENNA jack

AM ANTENNA terminals

D SPEAKERS section (page 19)

Remote commander

You can use the supplied remote to operate the
receiver and to control the Sony audio/video
components that the remote is assigned to
operate.

RM-AAU071 (Models of area
code U2, CA2 only)

RM-AAU074 (Models of area
code ECE, CEK, AU1 only)

E AUTO CAL MIC section (page 31)

(Models of area code ECE, CEK,
AU1 only)

AUTO CAL MIC jack

F DMPORT section (page 22)

DMPORT jack

* You can watch the selected input image when you

connect the HDMI TV OUT or MONITOR OUT
jack to a TV (page 20, 23).

wk
wj

BD DVD

TV

VIDEO

DMPORT

TUNER

wh

wg
wf

wd

ws

O

wa

MENU

mM

x

X

.

w;
ql

SAT/

CATV

SA-CD/

CD

>

1
2

3

4

5
6
7
8
9

0

qa

qs

qd

qf

qg

qh

12

qk

GB

qj

Using the SHIFT (Q) and TV

.

mM

>

X

x

DMPORT

TUNER

O

MENU

(R) button

SHIFT (Q) button

Press and hold SHIFT (Q), then press the
button with pink printing that you want to use.
Example: Press and hold SHIFT (Q), then
press ENTER (E).

ENTER

SHIFT

TV (R) button

Press and hold TV (R), then press the button
with yellow printing to control the TV.
Example: Press and hold TV (R), then press
TV CH + (RM-AAU071 only) or PROG +
(RM-AAU074 only) (P).

x

X

.

TV

>

TV CH/PROG

To control the receiver

Name and function

B ?/1b) (on/standby)

Turns the receiver on or sets it to standby mode.

Saving the power in standby mode

When “CTRL.HDMI” is set to “CTRL OFF”
(page 58).

C Input buttons (VIDEO

Selects the component you want to use. When
you press any of the input buttons, the receiver
turns on. The buttons are initial assigned to
control Sony components.

D Numeric buttons

Presets or tunes to preset stations.

E ENTER

c)

Enters the selection.

F MEMORY

Stores a station.

G D.TUNING

Enters direct tuning mode.

I DISPLAY

Views information on the display.

K AMP MENU

Displays the menu to operate the receiver.

L

V/v/B/b

,

Press V/v/B /b to select the settings, then press

to enter the selection.

a)

)

c)

(number 5a))

continued

13

GB

Name and function

N MENU/HOME

Displays the menu to operate the receiver.

O TUNING +/–

Scans a station.

PRESET +/–

Selects preset stations.

P SOUND FIELD +

Selects a sound field (page 42).

S MUTING (RM-AAU071 only)

(RM-AAU074 only)

Turns off the sound temporarily.
Press MUTING/ again to restore the sound.

T MASTER VOL +/– (RM-AAU071 only)

+/– (RM-AAU074 only)

Adjust the volume level of all speakers at the
same time.

U RETURN/EXIT O

Returns to the previous menu.

a)

The following buttons have tactile dots:
– RM-AAU071: 5/VIDEO, AUDIO, N and

TV CH +/SOUND FIELD +

– RM-AAU074: 5/VIDEO, , N and

PROG +/SOUND FIELD +/c

Use the tactile dots as references when operating
the receiver.

b)

If you press AV ?/1 (A) and ?/1 (B)
simultaneously, the receiver and connected
components will turn off (SYSTEM STANDBY).

c)

Press and hold SHIFT (Q) then press this button.

d)

Press AMP MENU (K) to activate this button.

d)

a)

/–

To control a Sony TV

Press and hold TV (R) and then press the
yellow printing button to select the function
you want.

Name and function

A TV ?/1 (on/standby)

Turns on or off the TV.

D Numeric buttons (number 5

Selects the TV channels.

E ENTER (RM-AAU071 only)

Enters the selections.

(Previous channel) (RM-AAU074

only)

Returns to the previous channel watched (for
more than five seconds).

I DISPLAY (RM-AAU071 only)

Displays the information of TV.

/ (Info/Text reveal) (RM-AAU074

only)

In digital mode: Displays brief details of the
program currently being watched.
In analog mode: Displays information such as
current channel number and screen format.
In text mode: Reveals hidden information (e.g.
answers to a quiz).

J Color buttons

Displays an operation guide on the TV screen
when the color buttons are available. Follow the
operation guide to perform a selected operation.

M TOOLS/OPTIONS

Displays the TV options.

N MENU/HOME

Displays the TV menus.

a)

P TV CH +

/– (RM-AAU071 only)

Selects the next (+) or previous (–) channel.

a)

PROG +

/–, ca)/C (RM-AAU074 only)

In TV mode: Selects the next (+) or previous
(–) channel.
In text mode: Selects the next (c) or previous
(C) channel.

S MUTING (RM-AAU071 only)

(RM-AAU074 only)

Activates the TV’s muting function.

T TV VOL +/– (RM-AAU071 only)

(RM-AAU074 only)

Adjust the volume.

U RETURN/EXIT O

Returns to the previous TV menu.

a)

)

14

GB

Name and function

V GUIDE (RM-AAU071 only)

(RM-AAU074 only)

Displays the guide when you are watching
analog or digital channel.

a)

W AUDIO

Selects the desired audio signal.

Y DIGITAL (RM-AAU074 only)

Changes to digital mode.

ANALOG (RM-AAU074 only)

Changes to analog mode.

Z / (Text) (RM-AAU074 only)

Displays text.

wj THEATER (RM-AAU071 only)

THEATRE (RM-AAU074 only)

Sets the optimal picture settings automatically
for watching movies when you connect a Sony
TV that is compatible with the THEATER/
THEATRE button function (page 51).

wk INPUT (RM-AAU071 only)

Selects the input signal (TV or video).

(RM-AAU074 only)

In TV mode: Selects the input signal (TV or
video).
In analog text mode: Holds the current page.

a)

The following buttons have tactile dots:
– RM-AAU071: 5/VIDEO, AUDIO, N and

TV CH +/SOUND FIELD +

– RM-AAU074: 5/VIDEO, , N and

PROG +/SOUND FIELD +/c

Use the tactile dots as references when operating
the receiver.

(RM-AAU071 only)

a)

(RM-AAU074 only)

/ (Input select/Text hold)

continued

15

GB

To control other Sony components

Name

A AV ?/1
D Numeric buttons

E ENTER
H ANGLE

b)

(number 5a))

c)

d)

e)

Blu-ray disc,
DVD player

Power Power Power Power

c)

Track Channel Channel Track

Enter Enter

Select angle

I DISPLAY Display Display Display Display
J Color buttons Menu, guide Menu, guide
L Enter Enter Enter

V/v/B/b Select Select Select

M TOOLS/OPTIONS Options

menu

N MENU/HOME Menu Menu Menu
O m/M

f)

Search forward,
backward

a)f)

N
./>

f)

X

f)

x

f)

Play Play Play

Skip track Skip track Skip track

Pause Pause Pause

Stop Stop Stop

U RETURN/EXIT O Exit menu Exit menu,

V GUIDE

W AUDIO

X SUBTITLE

d)

e)

a)d)

e)

d)

e)

Program
schedule

Select audio

Select subtitle

Y TOP MENU On-screen guide

POP UP/MENU Menu–––

Z CLEAR

a)

The following buttons have tactile dots:

c)

Clear Clear

– RM-AAU071: 5/VIDEO, AUDIO, N and

TV CH +/SOUND FIELD +

– RM-AAU074: 5/VIDEO, , N and

PROG +/SOUND FIELD +/c

Use the tactile dots as references when operating
the receiver.

b)

If you press AV ?/1 (A) and ?/1 (B)
simultaneously, the receiver and connected
components will turn off (SYSTEM STANDBY).
The function of the AV ?/1 (A) changes
automatically each time you press the input
buttons (C).

c)

Press and hold SHIFT (Q) then press this button.

Satellite tuner,
Cable TV tuner

d)

Options

d)

menu

Fast forward,

d)

Live TV

Display

VCR CD player

Enter Enter

e)

––

––

Fast forward,

rewind

rewind

––

––

guide menu

d)

RM-AAU071 only.

e)

RM-AAU074 only.

f)

This button is also available for DIGITAL MEDIA
PORT adapter operation. For details on the
function of the button, refer to the operating
instructions supplied with the DIGITAL MEDIA
PORT adapter.

Notes

• Some functions explained in this section may not
work depending on the model.

• The above explanation is intended to serve as an
example only. Therefore, depending on the
component, the above operation may not be
possible or may operate differently than described.

16

GB

Inserting batteries into the
remote

Insert two R6 (size-AA) batteries in the
RM-AAU071 (Models of area code U2, CA2
only) or RM-AAU074 (Models of area code
ECE, CEK, AU1 only) Remote Commander.
Observe the correct polarity when installing
batteries.

Notes

• Do not leave the remote in an extremely hot or
humid place.

• Do not use a new battery with old ones.

• Do not mix manganese batteries and other kinds of
batteries.

• Do not expose the remote sensor to direct sunlight
or lighting apparatuses. Doing so may cause a
malfunction.

• If you do not intend to use the remote for an
extended period of time, remove the batteries to
avoid possible damage from battery leakage and
corrosion.

• When you replace the batteries, the remote buttons
may be reset to their initial settings. If this happens,
reassign the buttons again (page 66).

• When the remote no longer operates the receiver,
replace all the batteries with new ones.

Connections

1: Installing the speakers

This receiver allows you to use a 5.1 channel
system (5 speakers and one subwoofer).

To fully enjoy theater-like multi channel
surround sound requires five speakers (two
front speakers, a center speaker, and two
surround speakers) and a subwoofer (5.1
channel).

Example of a 5.1 channel
speaker system configuration

AFront speaker (Left)
BFront speaker (Right)
CCenter speaker
DSurround speaker (Left)
ESurround speaker (Right)
FSubwoofer

Connections

continued

17

GB

Note

To enjoy better surround sound, the distance
between the center speaker and the listening position
B cannot be more than 1.5 meters (5 feet) closer
than the one between the listening position and the
front speaker A. Place the speakers so that the
difference in the length of B in the following
diagram is no more than 1.5 meters (5 feet) closer
than the length of A.
Example: Adjust the distance B to 4.5 meters
(15 feet) or more when the distance A is 6 meters
(20 feet).
Also, the distance between the surround speakers
and the listening position C cannot be more than

4.5 meters (15 feet) closer than the distance between
the listening position and the front speakers A.
Place the speakers so that the difference in the length
of C in the above diagram is no more than

4.5 meters (15 feet) closer than the length of A.
Example: Adjust the distance C to 1.5 meters
(5 feet) or more when the distance A is 6 meters
(20 feet).
This is important because incorrect speaker
placement is not conductive to the enjoyment of
surround sound. Please note that placing the
speakers closer than the required will cause a delay
in the output of the sound from that speaker. In other
words, the speaker will sound like it is farther away.
Adjusting these parameter while listening to the
sound often results in much better surround sound.

Tips

• The angle A should be the same.

A A

30˚30˚

100˚-120˚100˚-120˚

• Since the subwoofer does not emit highly
directional signals, you can place it wherever you
want.

18

GB

2: Connecting the speakers

Before connecting the cords, be sure to disconnect the AC power cord (mains lead).

Connections

AM

TENNA

DVD IN

MONITOR

OUT

ENT VIDEO

AUDIO

AUDIO

IN

IN

SA-CD/CD SAT/CATV

TV

Center speaker

VIDEO

AUDIO

HDMI

VIDEO

VIDEO

OUT

OUT

IN

MONITOR

AUDIO

AUDIO

OUT

IN

OUT

VIDEO

SUBWOOFER

DVD IN BD IN SAT/CATV IN TV OUT

VIDEO

VIDEO

IN

IN

DVD

AUDIO

IN

A

ARC

B

CENTER

SURROUND

SPEAKERS

LLR

Front speaker

Left

FRONT

R

B

Right

10 mm

(13/32 in.)

B

LeftRight

Subwoofer* Surround speaker

A Monaural audio cord (not supplied)
B Speaker cord (not supplied)

* When you connect a subwoofer with an auto

standby function, turn off the function when
watching movies. If the auto standby function is
set to on, it turns to standby mode automatically
based on the level of the input signal to a
subwoofer, then sound may not be output.

Notes

• Before connecting the AC power cord (mains
lead), make sure that metalic wires of the speaker
cords are not touching each other between the
SPEAKERS terminals.

• After you have install and connect your speaker, be
sure to select the speaker pattern from SPEAKER
menu (page 60).

19

GB

3: Connecting the TV

Before connecting cords, be sure to disconnect the AC power cord (mains lead).

TV

Audio signals

Video signals

Audio/Video

signals

a)

TV

SAT/
CATV

IN

OPTICAL

DVD

IN

COAXIAL

DIGITAL

DC5V

DMPORT

IN

OPTICAL

(ASSIGNABLE)

0.7A MAX

B

AUTO CAL

MIC

ANTENNA

Y

P

B

/

C

B

PR/
C

R

DVD IN

SAT/CATV IN

COMPONENT VIDEO

AUDIO

IN

L

R

SA-CD/CD

CE

AM

MONITOR

OUT

AUDIO

TV

VIDEO

AUDIO

IN

SAT/CATV

DVD IN BD IN SAT/CATV IN

VIDEO

VIDEO

IN

OUT

IN

DVD

AUDIO

IN

OUT

VIDEO

A

A Audio cord (not supplied)
B Optical digital cord (not supplied)
C Component video cord (not supplied)
D Video cord (not supplied)
E HDMI cable (not supplied)

We recommend that you use a Sony HDMI
cable.

Recommended connection
Alternative connection

D

a)

b)

VIDEO

AUDIO

IN

IN

HDMI

VIDEO

OUT

MONITOR

AUDIO

OUT

SUBWOOFER

TV OUT

ARC

SURROUNDCENTER

LLR

SPEAKERS

a)

To enjoy TV multi channel surround sound
broadcasting from the speakers connected to the
receiver, connect either B or E.
Be sure to turn off the TV’s volume or activate the
TV’s muting function.

b)

If your TV is compatible with the Audio Return
Channel (ARC) function, the TV sound will output
from the speakers connected to the receiver via
HDMI TV OUT connection. In this case, set
“ARC” to “ARC ON” in HDMI menu (page 51).

FRONT

R

20

GB

Notes

• Be sure to turn on the receiver when the video and
audio signals of a playback component are being
output to a TV via the receiver. Unless the power is
turned on, neither video nor audio signals will be
transmitted.

• Connect image display components such as a TV
monitor or a projector to the HDMI TV OUT or
MONITOR OUT jack on the receiver. You may
not be able to record even if you connect recording
components.

• Depending on the status of the connection between
the TV and the antenna (aerial), the image on the
TV screen may be distorted. In this case, place the
antenna (aerial) farther away from the receiver.

• When connecting optical digital cords, insert the
plugs straight in until they click into place.

• Do not bend or tie optical digital cords.

Tip

All the digital audio jacks are compatible with
32 kHz, 44.1 kHz, 48 kHz, and 96 kHz sampling
frequencies.

Connections

21

GB

4a: Connecting the audio
components

The following illustration shows how to
connect a Super Audio CD player, CD player
and DIGITAL MEDIA PORT adapter. Before
connecting cords, be sure to disconnect the AC
power cord (mains lead).

Super Audio
CD player,
CD player

A

TV

B

Notes on connecting DIGITAL
MEDIA PORT adapter

• Do not connect an adapter other than the
DIGITAL MEDIA PORT adapter.

• Do not connect or disconnect the DIGITAL
MEDIA PORT adapter while the receiver is
turned on.

• When connecting the DIGITAL MEDIA
PORT adapter, be sure the connector is
inserted with the arrow mark facing towards
the arrow mark on the DMPORT jack.

• Be sure to make DMPORT connections
firmly, insert the connector straight in.

• As the connector of the DIGITAL MEDIA
PORT adapter is fragile, be sure to handle
with care when placing or moving the
receiver.

To detach the DIGITAL MEDIA
PORT adapter from DMPORT
jack

AM

Y

P

B

/

C

B

PR/
C

R

SAT/CATV IN

COMPONENT VIDEO

AUTO CAL

MIC

ANTENNA

DVD IN

AUDIO

L

R

SA-CD/CD

VIDEO

IN

MONITOR

OUT

AUDIO

AUDIO

IN

IN

IN

SAT/CATV

TV

IN

TV

OPTICAL

SAT/
CATV

IN

OPTICAL

DVD

IN

COAXIAL

(ASSIGNABLE)

DIGITAL

DC5V

0.7A MAX

DMPORT

DIGITAL MEDIA

PORT adapter

A Audio cord (not supplied)
B Video cord (not supplied)

VIDEO

AUDIO

OUT

OUT

VIDEO

VIDEO

AUDIO

IN

IN

HDMI

VIDEO

OUT

MONITOR

AUDIO

OUT

SUBWOOFER

DVD IN BD IN SAT/CATV IN

VIDEO

IN

DVD

1

DC5V 0.7A MAX

DMPORT

2

Press and hold both sides of the connector and
then pull out the connector.

22

GB

4b: Connecting the video components

Notes

Components to be connected

Connect your video components according to
the table below.

Component Page

Blu-ray disc player* 24

“PlayStation 3”* 24

DVD player* 24, 26

DVD recorder* 24, 26, 28

Satellite tuner*, Cable TV tuner* 24, 27

VCR 28

* We recommend that you connect your video

components via HDMI connection if they have
HDMI jacks.

• Before connecting cords (mains lead), be sure to
disconnect the AC power cord.

• It is not necessary to connect all the cords. Connect
according to the availability of jacks on the
connected components.

• Be sure to turn on the receiver when the video and
audio signals of a playback component are being
output to a TV via the receiver. Unless the power is
turned on, neither video nor audio signals will be
transmitted.

• When connecting optical digital cords, insert the
plugs straight in until they click into place.

• Do not bend or tie optical digital cords.

Tip

All the digital audio jacks are compatible with
32 kHz, 44.1 kHz, 48 kHz, and 96 kHz sampling
frequencies.

Connections

You can watch the selected input image when
you connect the HDMI TV OUT or
MONITOR OUT jack to a TV (page 20).

If you want to connect several
digital components, but cannot
find an unused input

See “Enjoying the sound from other inputs”
(page 53).

Connecting components with
HDMI jacks

HDMI is the abbreviated name for High­Definition Multimedia Interface. It is an
interface which transmits video and audio
signals in digital format.

HDMI features

• A digital audio signals transmitted by HDMI

can be output from the speakers connected to
the receiver. This signal supports Dolby
Digital, DTS, and Linear PCM.

• This receiver can receive multi channel

Linear PCM with a sampling frequency of
192 kHz or less with an HDMI connection.

• This receiver supports Deep Colour (Deep

Color) and x.v.Colour (x.v.Color).

• This receiver supports the Control for HDMI

function. For details, see ““BRAVIA” Sync
Features” (page 47).

continued

23

GB

DVD player, DVD recorder Blu-ray disc player, “PlayStation 3” Satellite tuner, Cable TV tuner

Audio/video
signals

Audio/video
signals

Audio/video
signals

AAA

TV

SAT/

CATV

IN

OPTICAL

DVD

IN

COAXIAL

DIGITAL

DC5V

OPTICAL

(ASSIGNABLE)

DMPORT

IN

0.7A MAX

Y

B

/

P
C

B

PR/
C

R

SAT/CATV IN

COMPONENT VIDEO

AUTO CAL

MIC

ANTENNA

DVD IN

AUDIO

L

R

SA-CD/CD

AM

IN

MONITOR

OUT

AUDIO

IN

TV

VIDEO

AUDIO

SAT/CATV

DVD IN BD IN SAT/CATV IN

VIDEO

VIDEO

IN

OUT

IN

DVD

AUDIO

IN

OUT

VIDEO

VIDEO

AUDIO

IN

IN

A HDMI cable (not supplied)

We recommend that you use a Sony HDMI cable.

* See page 20 for the audio connection of the TV to

the receiver.

HDMI

VIDEO
OUT

MONITOR

AUDIO

OUT

SUBWOOFER

TV OUT

ARC

SURROUNDCENTER

LLR

R

SPEAKERS

A

Audio/video
signals

TV, etc.*

Notes

• The initial setting for the DVD input button is as
follows:
– RM-AAU071: DVD player
– RM-AAU074: DVD recorder
Be sure to change the initial setting of the DVD
input button on the remote so that you can use the
button to control your DVD player/recorder.
For details, see “Changing the input button
assignments” (page 66).

• You can also rename the DVD input so that it can
be displayed on the receiver’s display. For details,
see “Naming inputs” (page 36).

FRONT

24

GB

Loading…

4-168-043-82(1)

Multi Channel AV

Receiver

STR-DH510

©2010 Sony Corporation

Для покупателей в Poccии

ПРЕДУПРЕЖДЕНИЕ

Для предотвращения возгорания

или поражения электрическим

током не подвергайте аппарат

воздействию дождя или влаги.

Для предотвращения возгорания не

Для покупателей в странах

накрывайте вентиляционные отверстия

Европы

аппарата газетами, скатертями, шторами т.п.

Утилизация отслужившего

Не ставьте на аппарат источники открытого

электрического и

огня, например, зажженные свечи.

электронного

Нельзя устанавливать аппарат в тесных

оборудования (директива

местах как в книжном шкафу или углублении

применяется в странах

в стенке.

Евросоюза и других

европейских странах, где

Для предотвращения возгорания или

действуют системы

поражения электрическим током не

раздельного сбора

допускайте попадания жидкости на аппарат и

отходов)

не ставьте на корпус аппарата предметы,

содержащие жидкость, например цветочные

вазы и т.п.

Утилизация

использованных

Так как кабель питания используется для

элементов питания

отсоединения аппарата от электросети,

(применяется в странах

подключайте аппарат к расположенной в

Евросоюза и других

легкодоступном месте розетке электросети.

европейских странах, где

В случае нарушения нормальной работы

действуют системы

устройства незамедлительно отсоедините

раздельного сбора

штекер кабеля питания от розетки

отходов)

электросети.

Не подвергайте батарею или аппарат с

Информация для покупателей:

установленной батареей чрезмерному

следующая информация относится

нагреванию, например не оставляйте под

только к оборудованию,

солнечными лучами, рядом с огнем и т.п.

приобретенному в странах, где

действуют директивы ЕС.

Пока аппарат включен в розетку

Производителем данного устройства

электросети, он остается подключенным к

является корпорация Sony Corporation, 1-7-1

сети электропитания, даже если питание на

Konan Minato-ku Tokyo, 108-0075 Japan.

самом устройстве выключено.

Уполномоченным представителем по

Избыточное звуковое давление при

электромагнитной совместимости (EMC) и

применении наушников может вызвать

безопасности изделия является компания

потерю слуха.

Sony Deutschland GmbH, Hedelfinger Strasse

61, 70327 Stuttgart, Germany. По вопросам

обслуживания и гарантии обращайтесь по

Этот символ – знак

адресам, указанным в соответствующих

“Осторожно! Горячая

документах.

поверхность!” –

предупреждает пользователя

о том, что поверхность

может быть горячей в

нормальном режиме работы.

RU

2

Об авторских правах

О данном

В ресивер встраиваются системы Dolby*

руководстве

Digital и Pro Logic Surround, а также DTS**

Digital Surround.

Изложенные в данном руководстве

* Изготовлено по лицензии компании

инструкции относятся к модели

Dolby Laboratories. Dolby, Pro Logic и

STR-DH510. Номер модели указан в

двойной символ D являются товарными

нижнем правом углу на фронтальной

знаками компании Dolby Laboratories.

панели.

** Изготовлено по лицензии и в

В настоящем руководстве модели с

соответствии с патентами США №:

региональным кодом ECE приведены

5451942; 5956674; 5974380; 5978762;

только в качестве примеров, если не

6487535, а также другими патентами в

указано иное. Если существуют какие-либо

США и прочих странах, выданных и

различия в эксплуатации, они явно указаны

находящихся на рассмотрении. DTS и DTS

в тексте: “Только модели с региональным

Digital Surround являются

кодом ECE”.

зарегистрированными товарными

Инструкции в данном руководстве

знаками, а логотипы DTS и символ

относятся к элементам управления на

являются товарными знаками DTS, Inc.

прилагаемом пульте ДУ. Можно также

© 1996-2008 DTS, Inc. Все права

использовать элементы управления на

защищены.

ресивере с теми же или похожими

названиями, что и на пульте ДУ.

В ресивере используется технология High-

TM

Definition Multimedia Interface (HDMI

).

О региональных кодах

HDMI, логотип HDMI и High-Definition

Региональный код приобретенного

Multimedia Interface являются товарными

ресивера находится на нижней правой

знаками или зарегистрированными

части на задней панели (см. рисунок ниже).

товарными знаками компании HDMI

Licensing LLC в США и других странах.

“x.v.Colour (x.v.Color)” и логотип “x.v.Colour

FRONT

SURROUNDCENTER

L

(x.v.Color)” являются товарными знаками

R

L

R

Sony Corporation.

SPEAKERS

4-XXX-XXX-XX (X) AA

“BRAVIA” является товарным знаком Sony

Региональный код

Corporation.

Если существуют какие-либо различия в

эксплуатации в соответствии с

“PLAYSTATION” является товарным

региональным кодом, они явно указаны в

знаком Sony Computer Entertainment Inc.

тексте: “Только модели с региональным

кодом AA”.

RU

3

Sony STR-DH510 User Manual [PDF]

Pages: 80 | Size: 1.21 MB

Table of Contents

  • About This Manual
  • Description and location of parts
  • Connections
    • 1: Installing the speakers
    • 2: Connecting the speakers
    • 3: Connecting the TV
    • 4a: Connecting the audio components
    • 4b: Connecting the video components
    • 5: Connecting the antennas (aerials)
    • 6: Connecting the AC power cord (mains lead)
  • Preparing the Receiver
    • Initializing the receiver
    • Calibrating the appropriate speaker settings automatically (AUTO CALIBRATION)
    • Adjusting the speaker levels (TEST TONE)
  • Basic Operations
    • Playback
    • Viewing information on the display
    • Using the Sleep Timer
    • Recording
  • Tuner Operations
    • Listening to FM/AM radio
    • Presetting FM/AM radio stations
    • Using the Radio Data System (RDS)
  • Enjoying Surround Sound
    • Selecting the sound field
    • Enjoying the surround effect at low volume levels (NIGHT MODE)
    • Resetting sound fields to the initial settings
  • “BRAVIA” Sync Features
    • What is “BRAVIA” Sync?
    • Preparing for the “BRAVIA” Sync
    • Playing back components with one-touch operation (One-Touch Play)
    • Enjoying the TV sound from the speakers connected to the receiver (System Audio Control)
    • Turning off the receiver with the TV (System Power Off)
    • Enjoying movies with the optimum sound field (Theater/Theatre Mode Sync)
    • Enjoying the TV sound via an HDMI cable (Audio Return Channel)
  • Advanced Operations
    • Switching between digital and analog audio (INPUT MODE)
    • Enjoying the sound from other inputs
    • Enjoying sound/images from the components connected to the DIGITAL MEDIA PORT
    • Using the setting menu
  • Using the Remote
    • Changing the input button assignments
    • Clearing all the contents of the remote’s memory
  • Additional Information
    • Glossary
    • Precautions
    • Troubleshooting
    • Specifications
    • Index

Инструкция

Посмотреть инструкция для Sony STR-DH510 бесплатно. Руководство относится к категории приемники, 7 человек(а) дали ему среднюю оценку 7.5. Руководство доступно на следующих языках: русский. У вас есть вопрос о Sony STR-DH510 или вам нужна помощь?

Задайте свой вопрос здесь

Ниже вы найдете технические характеристики изделия и руководства по эксплуатации Sony STR-DH510.

Ресивер Sony STR-DH510 обеспечивает вашу домашнюю развлекательную систему мощным усилением. С изготовленными из 5 HD входов (3 HDMI, 2 компонентов) легко интегрировать ваши HD компоненты, такие как проигрыватель Blu-ray Disc или игровая система PlayStation3. Вы также получите звук ближе к тому, как он был записан, благодаря встроенной декодировке аудио с Blu-ray Disc (только LPCM). Дополнительные функции включают в себя канал возврата аудиосигнала, который устраняет необходимость дополнительных кабелей, подключенных к вашему телевизору, а также режим ожидания, который позволяет получить доступ ко всем подключенным через HDMI устройствам без включения ресивера.

С пятью HD входами вы получаете разнообразные опции подключения. Три HDMI входа (до 1080/24p) позволяют подключить игровую систему Sony PlayStation 3, проигрыватель Blu-ray Disc и другие два устройства, совместимые с HDMI, для высококачественного видео и аудио. Два компонентных входа (1080/60i) обеспечивают дополнительные возможности подключения в HD и универсальность.

Имеется возможность канала возврата аудиосигнала, которая устраняет необходимость дополнительных кабелей, подключенных к вашему телевизору.

Диапазон частот

20 — 20000 Hz

Компонентный видео вход (YPbPr/YCbCr)

2

Технология подключения

Проводная

Главная
Бренд Sony
Модель STR-DH510 | STR-DH510
Изделие приемник
EAN 4905524627381
Язык русский
Тип файла Руководство пользователя (PDF), Инструкция по установке (PDF)
Технические характеристики
Эквалайзер Да
Аудио декодеры Dolby Digital, Dolby Pro Logic II, dts
Пульт дистанционного управления Да
Цвет товара Черный
Дисплей VFL
Совместимость подключения с устройствами Apple Не поддерживается
AirPlay Нет
Аудио
Диапазон частот 20 — 20000 Hz
Суммарный коэффициент гармоник (THD) 1 %
Полное сопротивление 8 Ω
Выходные звуковые каналы 5.1 канала
Номинальная RMS-мощность 500 W
Выходная мощность на канал (20-20кГц@8 Ом) 100 W
Выходная мощность на канал (1кГц@8 Ом) 100 W
Тип ресивера Объемный звук
Входные соединения
Компонентный видео вход (YPbPr/YCbCr) 2
Вход линии Да
Цифровой оптический аудио вход 1
Цифровой коаксиальный аудио вход 1
Вход HDMI 3
Порты и интерфейсы
Технология подключения Проводная
Тип подключения колонок
Выходные соединения
Линейный выход Да
Порт подключения наушников 3,5 мм
Количество HDMI выходов 1
Вес и размеры
Вес 7400 g
Ширина 430 mm
Глубина 322 mm
Высота 157.5 mm
Радио
Автоматическая цифровая настройка Да
AM диапазон 530 — 1710 kHz
FM диапазон 87.5 — 108 MHz
Поддерживаемые диапазоны радио AM, FM
Содержимое упаковки
Инструкция Нет
Гарантийная карточка Да
Руководство пользователя Да
Энергопитание
Потребляемая мощность (в обычном режиме) 230 W
Потребляемая мощность (в режим ожидания) 0.3 W
Сеть
Подключение Ethernet Нет
Wi-Fi Нет
Оптический привод
Встроенный оптический привод Нет
Устройства хранения данных
Видео

показать больше

Часто задаваемые вопросы

Не можете найти ответ на свой вопрос в руководстве? Вы можете найти ответ на свой вопрос ниже, в разделе часто задаваемых вопросов о Sony STR-DH510.

Какой вес Sony STR-DH510?

Sony STR-DH510 имеет вес 7400 g.

Могут ли устройства разных марок подключаться друг к другу при помощи Bluetooth?

Да, Bluetooth — универсальный метод, позволяющий различным устройствам, оснащенным Bluetooth, подключаться друг к другу.

Какая высота Sony STR-DH510?

Sony STR-DH510 имеет высоту 157.5 mm.

Какая ширина Sony STR-DH510?

Sony STR-DH510 имеет ширину 430 mm.

Что такое Bluetooth?

Bluetooth — это способ обмена данными по беспроводной сети между электронными устройствами с помощью радиоволн. Расстояние между двумя устройствами обменивающимися данными в большинстве случаев составляет не более десяти метров.

Какая толщина Sony STR-DH510?

Sony STR-DH510 имеет толщину 322 mm.

Что такое HDMI?

HDMI расшифровывается как «интерфейс для мультимедиа высокой четкости». Кабель HDMI используется для передачи аудио- и видеосигналов между устройствами.

Когда звук считается слишком громким?

Уровень звука выше 80 децибел может нанести вред слуху. Уровень звука выше 120 децибел может нанести прямое повреждение слуху. Вероятность повреждения слуха зависит от частоты и продолжительности прослушивания.

Как лучше всего выполнять чистку приемник?

Для удаления отпечатков пальцев лучше всего использовать слегка влажную салфетку для уборки или мягкую чистую ткань. Пыль в труднодоступных местах лучше всего удаляется потоком сжатого воздуха.

Что такое Dolby Atmos?

Dolby Atmos — это технология, которая обеспечивает отражение звука от потолка к месту нахождения слушателя. Это позволяет создать эффект 5.1 при помощи всего лишь одного динамика.

Инструкция Sony STR-DH510 доступно в русский?

Да, руководствоSony STR-DH510 доступно врусский .

Не нашли свой вопрос? Задайте свой вопрос здесь

Краткое содержание страницы № 1

4-168-043-12(1)
Multi Channel AV
Receiver
Operating Instructions
STR-DH510
©2010 Sony Corporation

Краткое содержание страницы № 2

For customers in the United WARNING States To reduce the risk of fire or electric Owner’s Record shock, do not expose this apparatus to The model and serial numbers are located on the rear rain or moisture. of the unit. Record these numbers in the space provided below. Refer to them whenever you call To reduce the risk of fire, do not cover the upon your Sony dealer regarding this product. ventilation opening of the apparatus with Model No. Serial No.

Краткое содержание страницы № 3

12)Use only with the cart, stand, tripod, bracket, or CAUTION table specified by the manufacturer, or sold with You are cautioned that any changes or modifications the apparatus. When a cart is used, use caution not expressly approved in this manual could void when moving the cart/apparatus combination to your authority to operate this equipment. avoid injury from tip-over. To reduce the risk of electric shock, the speaker cord should be connected to the apparatus and the speakers in acc

Краткое содержание страницы № 4

Disposal of waste batteries For customers in Australia (applicable in the European Disposal of Old Electrical & Union and other European Electronic Equipment countries with separate (Applicable in the European collection systems) Union and other European This symbol on the battery or on the packaging countries with separate collection systems) indicates that the battery provided with this product shall not be treated as household waste. On certain batteries this symbol might be used in

Краткое содержание страницы № 5

On Copyrights About This Manual This receiver incorporates Dolby* Digital and Pro Logic Surround and the DTS** Digital Surround � The instructions in this manual are for model System. STR-DH510. Check your model number by * Manufactured under license from Dolby looking at the lower right corner of the front panel. Laboratories. Dolby, Pro Logic, and the double- � In this manual, models of area code ECE is used D symbol are trademarks of Dolby Laboratories. for illustration purposes unless

Краткое содержание страницы № 6

Table of Contents About This Manual………………………………….5 Enjoying Surround Sound Supplied accessories………………………………..7 Description and location of parts……………….8 Selecting the sound field……………………….. 42 Enjoying the surround effect at low volume levels (NIGHT MODE) ………… 46 Connections Resetting sound fields to the initial 1: Installing the speakers ………………………..17 settings ……………………..

Краткое содержание страницы № 7

Using the Remote Supplied accessories Changing the input button assignments …… 66 Clearing all the contents of the remote’s � Operating Instructions (this manual) memory ………………………………………….. 67 � Quick Setup Guide � FM wire antenna (aerial) (1) Additional Information Glossary ……………………………………………… 67 � AM loop antenna (aerial) (1) Precautions………………………………………….. 69 Troubleshooting ………………

Краткое содержание страницы № 8

Description and location of parts Front panel 12 3 4 5 MASTER VOLUME ?/1 INPUT SELECTOR MEMORY/ 2CH/ INPUT MODE TUNING MODE TUNING ENTER A.DIRECT A.F.D. MOVIE MUSIC DISPLAY DIMMER MUTING PHONES qs qa q; 9 8 7 6 A ?/1 (on/standby) (page 30, 39, 46, 67) B INPUT SELECTOR (page 35) C Display (page 9) D Remote sensor Receives signals from remote commander. E MASTER VOLUME (page 34, 35) F MUTING (page 35) G DIMMER (page 65) H DISPLAY (page 36) I 2CH/A.DIRECT, A.F.D., MOVIE, MUSIC (page 42) J TUNING

Краткое содержание страницы № 9

Indicators on the display 1234 5 6 LFE HDMI DTS PL II SW COAX OPT LPCM D SLEEP LC R ST D.RANGE SL S SR RDS q; 9 8 7 Indicator and explanation Indicator and explanation A Playback channel indicators C Input indicators The letters (L, C, R, etc.) indicate the channels Light up to indicate the current input. being played back. The boxes around the letters vary to show how the receiver downmixes or HDMI upmixes the source sound (based on the speaker Lights up when settings). – INPUT MODE is set to

Краткое содержание страницы № 10

Indicator and explanation F SLEEP Lights up when the sleep timer is activated (page 37, 65). G D.RANGE Lights up when dynamic range compression is activated (page 59). H Tuning indicators Lights up when the receiver tunes in radio stations. ST Stereo broadcast RDS (Models of area code ECE, CEK, AU1 only) A station that provides RDS services is tuned in. Preset station number Note The preset station number will change according to the preset station you select. For details on presetting r

Краткое содержание страницы № 11

Rear panel 1 32 1, 2 AM HDMI DVD IN BD IN SAT/CATV IN TV OUT ANTENNA ARC IN Y TV PB/ OPTICAL CB VIDEO VIDEO VIDEO VIDEO VIDEO IN IN OUT IN OUT SAT/ CATV PR/ IN CR OPTICAL FRONT SAT/CATV IN DVD IN MONITOR OUT L DVD CENTER SURROUND IN MONITOR COMPONENT VIDEO DVD R L COAXIAL AUDIO AUDIO AUDIO AUDIO AUDIO AUDIO DIGITAL (ASSIGNABLE) IN IN IN OUT IN OUT L R R DC5V 0.7A MAX SA-CD/CD TV SAT/CATV VIDEO SUBWOOFER SPEAKERS AUTO CAL DMPORT MIC 6 5 1 4 A Audio signal section B Video signal section* The imag

Краткое содержание страницы № 12

C ANTENNA section (page 29) Remote commander FM ANTENNA jack You can use the supplied remote to operate the receiver and to control the Sony audio/video AM ANTENNA terminals components that the remote is assigned to operate. D SPEAKERS section (page 19) RM-AAU071 (Models of area code U2, CA2 only) RM-AAU074 (Models of area code ECE, CEK, AU1 only) wk 1 wj 2 E AUTO CAL MIC section (page 31) (Models of area code ECE, CEK, SAT/ BD DVD CATV 3 AU1 only) SA-CD/ TV VIDEO CD 4 AUTO CAL MIC jac

Краткое содержание страницы № 13

TV (R) button Using the SHIFT (Q) and TV Press and hold TV (R), then press the button (R) button with yellow printing to control the TV. SHIFT (Q) button Example: Press and hold TV (R), then press Press and hold SHIFT (Q), then press the TV CH + (RM-AAU071 only) or PROG + button with pink printing that you want to use. (RM-AAU074 only) (P). Example: Press and hold SHIFT (Q), then press ENTER (E). . X x > TV CH/PROG DMPORT TUNER ENTER TV O To control the receiver MENU Name and function mM b

Краткое содержание страницы № 14

To control a Sony TV Name and function Press and hold TV (R) and then press the d) N MENU/HOME yellow printing button to select the function Displays the menu to operate the receiver. you want. O TUNING +/– Scans a station. Name and function PRESET +/– A TV ?/1 (on/standby) Selects preset stations. Turns on or off the TV. a) P SOUND FIELD + /– a) D Numeric buttons (number 5 ) Selects a sound field (page 42). Selects the TV channels. S MUTING (RM-AAU071 only) E ENTER (RM-AAU071 only) (RM-AAU

Краткое содержание страницы № 15

Name and function V GUIDE (RM-AAU071 only) (RM-AAU074 only) Displays the guide when you are watching analog or digital channel. a) W AUDIO (RM-AAU071 only) a) (RM-AAU074 only) Selects the desired audio signal. Y DIGITAL (RM-AAU074 only) Changes to digital mode. ANALOG (RM-AAU074 only) Changes to analog mode. Z / (Text) (RM-AAU074 only) Displays text. wj THEATER (RM-AAU071 only) THEATRE (RM-AAU074 only) Sets the optimal picture settings automatically for watching movies when you connect

Краткое содержание страницы № 16

To control other Sony components Blu-ray disc, Satellite tuner, VCR CD player Name DVD player Cable TV tuner b) A AV ?/1 Power Power Power Power c) D Numeric buttons Track Channel Channel Track a) (number 5 ) c) d) E ENTER Enter Enter Enter Enter d) H ANGLE Select angle – – – e) I DISPLAY Display Display Display Display e) J Color buttons Menu, guide Menu, guide–– L Enter Enter Enter – V/v/B/b Select Select Select – M TOOLS/OPTIONS Options Options –– d) menu menu N MENU/HOME Menu Menu Menu

Краткое содержание страницы № 17

Connections Inserting batteries into the remote Connections Insert two R6 (size-AA) batteries in the RM-AAU071 (Models of area code U2, CA2 1: Installing the speakers only) or RM-AAU074 (Models of area code ECE, CEK, AU1 only) Remote Commander. This receiver allows you to use a 5.1 channel Observe the correct polarity when installing system (5 speakers and one subwoofer). batteries. To fully enjoy theater-like multi channel surround sound requires five speakers (two front speakers, a ce

Краткое содержание страницы № 18

Note Tips To enjoy better surround sound, the distance � The angle A should be the same. between the center speaker and the listening position B cannot be more than 1.5 meters (5 feet) closer than the one between the listening position and the A A front speaker A. Place the speakers so that the 30˚ 30˚ difference in the length of B in the following 100˚-120˚ 100˚-120˚ diagram is no more than 1.5 meters (5 feet) closer than the length of A. Example: Adjust the distance B to 4.5 meters (1

Краткое содержание страницы № 19

Connections 2: Connecting the speakers Before connecting the cords, be sure to disconnect the AC power cord (mains lead). Center speaker Front speaker Left Right B B AM HDMI DVD IN BD IN SAT/CATV IN TV OUT TENNA ARC VIDEO VIDEO VIDEO VIDEO VIDEO IN IN OUT IN OUT FRONT DVD IN MONITOR OUT L CENTER SURROUND NENT VIDEO DVD MONITOR R L AUDIO AUDIO AUDIO AUDIO AUDIO AUDIO IN IN IN OUT IN OUT R SA-CD/CD TV SAT/CATV VIDEO SUBWOOFER SPEAKERS 10 mm (13/32 in.) A B Right Left Subwoofer* Surround speaker AM

Краткое содержание страницы № 20

3: Connecting the TV Before connecting cords, be sure to disconnect the AC power cord (mains lead). TV Audio signals Video signals Audio/Video signals a) a) A BCE D b) AM HDMI DVD IN BD IN SAT/CATV IN TV OUT ANTENNA ARC IN Y TV PB/ OPTICAL CB VIDEO VIDEO VIDEO VIDEO VIDEO IN IN OUT IN OUT SAT/ CATV PR/ IN CR FRONT OPTICAL SAT/CATV IN DVD IN MONITOR OUT L DVD CENTER SURROUND IN COMPONENT VIDEO DVD MONITOR R L COAXIAL AUDIO AUDIO AUDIO AUDIO AUDIO AUDIO DIGITAL (ASSIGNABLE) IN IN IN OUT IN OUT L R

Понравилась статья? Поделить с друзьями:
0 0 голоса
Рейтинг статьи
Подписаться
Уведомить о
guest

0 комментариев
Старые
Новые Популярные
Межтекстовые Отзывы
Посмотреть все комментарии
  • Casio amw 830 инструкция
  • Нимика инструкция по применению от чего помогает взрослым отзывы
  • Должностная инструкция уборщицы библиотеки
  • Как оплатить за газ через госуслуги пошаговая инструкция
  • Часы полет с будильником инструкция