CHT-R Series
CHT-8R
CHT-10R
CHT-12R
CHT-15R
U S E R ’ S
M A N U A L
D S P — C o n t r o l l e d H o m e T h e a t e r S u b w o o f e r
TM
CHT-8R
TM
CHT-10R
TM
CHT-12R
and
TM
CHT-15R
User’s Manual
DSP-Controlled Home Theater Subwoofer
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Caution
To reduce the risk of electric shock, do not remove cover (or back). No user-serviceable parts inside. Refer
servicing to qualified service personnel.
The lighting flash with arrowhead symbol is intended to alert the user to the presence of uninsulated
«dangerous voltage» within the product’s enclosure that may be of sufficient magnitude to constitute a risk
of electric shock to persons.
The exclamation point symbol is intended to alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature accompanying the subwoofer.
1. Read Instructions — All safety and operating instructions should be read before the subwoofer is operated.
2. Retain Instructions — The safety and operating instructions should be retained for future reference.
3. Heed Warnings — All warnings on the subwoofer and in the operating instructions should be adhered to.
4. Follow Instructions — All operating and use instructions should be followed.
5. Water and Moisture — The subwoofer should not be used near water — for example, near a bathtub,
washbowl, kitchen sink, laundry tub, in a wet basement, near a swimming pool or the like.
6. Carts and Stands — The subwoofer should be used only with a cart or stand recommended by the
manufacturer.
7. Wall or Ceiling Mounting — The subwoofer should be mounted to a wall or ceiling only as recommended
by the manufacturer.
8. Ventilation — The subwoofer should be situated so that its location or position does not interfere with its
proper ventilation. For example, the subwoofer should not be situated on a bed, sofa, rug, or similar surface
that may block the ventilation openings; or placed in a built-in installation such as a bookcase or cabinet
that may impede the flow of air through the ventilation openings.
9. Heat — The subwoofer should be situated away from heat sources such as radiators, heat registers, stoves,
or other subwoofers that produce heat.
10. Power Sources — The subwoofer should be connected to a power supply only of the type described in
the operating instructions or as marked on the subwoofer.
11. Power-Cord Protection — Power-supply cords should be routed so that they are not likely to be walked
on or pinched by items placed upon or against them, paying particular attention to cords at plugs,
convenience receptacles, and the point at which they exit from the subwoofer.
12. «Caution: To prevent electrical shock, match wide blade of plug to wide slot, fully inserted.» «Attention:
Pour eviter les chocs electriques, introduire lame la plus large de la fiche dans la borne correspondante
de la prise et pousser jusqu’ au fond».
13. Cleaning — The subwoofer should be cleaned only as recommended by the manufacturer.
14. Nonuse Periods — The power cord of the subwoofer should be unplugged from the outlet when left unused
for a long period of time.
15. Object and Liquid Entry — Care should be taken so that objects do not fall and liquids are not spilled onto
the enclosure.
16. Damage Requiring Service — The subwoofer should be serviced by qualified service personnel when:
a . The power-supply cord or plug has been damaged.
b. Objects have fallen or liquid has been spilled into the subwoofer.
c. The subwoofer has been exposed to rain.
d. The subwoofer does not appear to operate normally or exhibits a marked change in performance.
e. The subwoofer has been dropped or damaged.
17. Servicing — The user should not attempt to service the subwoofer beyond what is described in the operating
instructions.
18. The apparatus shall not be exposed to dripping or splashing water and that no objects filled with liquids,
such as vases be placed on the apparatus.
19. The disconnect device (the appliance inlet) shall remain readily operable (easily assessible).
All other servicing should be referred to qualified service personnel.
1
☞
Congratulations!
Congratulations on your purchase of a V elodyne Classic Home Theater
(CHT -R) subwoof er. This system represents the state-of-the-art in low
frequency reproduction. Read and follow the instructions below to insure safe and proper system operation.
Warning!
To prevent fire or shock hazard, do not expose this equipment to
rain or moisture. To avoid electrical shock, do not open speaker
enclosure or amp chassis cover. Please observe all warnings on
the equipment itself. There are no user serviceable parts inside.
Please refer all service questions to your authorized Velodyne dealer.
Prior to Installation
Please unpack the system carefully. Remove all staples used to seal
the carton as they can scratch the cabinet. Please save the carton
and all packaging materials for future use. Record the serial number
in the space provided on the warranty card for future reference.
Product Features and Controls
• DSP-controlled
• 4 selectable presets for customized listening mode
• Night-mode setting
• Mute control
• Built-in 160 watt (RMS) power amplifier (CHT-8R)
• Built-in 175 watt (RMS) power amplifier (CHT-10R)
• Built-in 200 watt (RMS) power amplifier (CHT-12R)
• Built-in 600 watt (RMS) power amplifier (CHT-15R)
• Adjustable (40 to 120 Hz) low-pass crossover with Subwoofer
Direct setting
• Speaker-level inputs and outputs
• 85 Hz high-pass crossover
• Line-level inputs
• Signal sensing auto turn on/off with bypass option
• Variab le volume control
• Selectable phase control (0, 90, 180, or 270 degrees)
• Dual staggered low-pass crossover; 12 dB/octave initial, 24
dB/octave ultimate
continued. . .
2
☞
• Anti-clipping circuit
• Over excursion protection
• Slot loaded design
Installation
Your new subwoofer system provides for a number of installation
options. Read all the installation information below in order to
determine which installation option is best for your system.
Remember to perform all installation procedures with system power
turned off.
80 Hz
LOW-PASS
CROSSOVER
1
2
3
4
5
6
7
8
DIRECT
VOLUME
AUTO ON/OFF
OUTPUT
INPUT
HIGH-PASS
CROSSOVER
SPEAKER LEVEL INPUT
SPEAKER LEVEL OUTPUT
40 Hz
UP
DOWN
ACTIVE
INACTIVE
R
L
LFE IN
100 Hz
80 Hz
LEFTRIGHT
CHT-R Series
SERIAL #
VELODYNE ACOUSTICS, INC.
WARNING: TO REDUCE THE RISK OF FIRE
OR ELECTRIC SHOCK. DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR MOISTURE.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
RISQUE DE CHOC ELECTRIQUE-NE PAS OUVRIR
AVIS:
DOUBLE INSULATION — WHEN SERVICING USE ONLY IDENTICAL REPLACEMENT PARTS
POWER
ON
OFF
230V~
50Hz
F 1A L
Figure 1. CHT-R Rear Panel Connections
3
☞
Rear Panel Connections
Figure 1 shows the connections on the rear panel of the CHT-R.
Following are brief descriptions of the connections described in Figure
1. More detail on these connections can be found on the next page.
(1) LOW -P ASS CROSSOVER
Use this knob to select the high-frequency range at which you
wish to cut off the signal to the subwoofer. When the knob is
turned all the way to the left, the Subwoofer Direct feature is
invoked and the subwoofer plays all frequencies up to 200 Hz.
(2 ) VOLUME Control
This control allows you to balance the output from the subwoofer
to the main speakers in your system. This control should be set
to achieve similar volume level from between both the main
speakers and subwoofer. When pressing volume up or down, the
speed at which the power light blinks indicates subwoofer volume
— the faster the blinking, the louder the unit plays.
Note: Volume is also controllable by using the supplied remote.
(3 ) AUTO ON/OFF Switch
Use this switch to select between auto-on (active) and constant
on (inactive) operation.
(4 ) LINE OUTPUT
Connect these jacks to the LINE IN preamp input to use the CHT-R’s
internal high pass crossover. See below for a more detailed explanation
of this crossover.
(5 ) LINE INPUT/LFE Input
Connect these jacks to the LINE OUT preamp output, LFE
output, or subwoofer output jacks of your receiver/processor. If
using the LFE output from your receiver or processor, plug the
single cable into the “L” – LFE input or, for more signal, use a “Y”
connector and feed the signal into both “R” and “L” inputs.
4
continued. . .
☞
(6 ) HIGH PASS CR OSSOVER Switch
This switch selects the frequency for the high pass crossover.
This crossover is functional on both line and speaker-level
outputs. Smaller speakers with limited low frequency output may
perform better using the higher 100 Hz setting that will reduce the
low frequencies sent to them. Larger speakers with greater low
frequency output may be able to handle the 80 Hz setting without
strain.
(7 ) SPEAKER LEVEL INPUT T erminals
Connect these input terminals to the speaker output terminals
of your amplifier or receiver. If you use this method of
connection, when you go to the receiver speaker set up menu,
make sure you select the large speaker option.
(8 ) SPEAKER LEVEL OUTPUT T erminals
Sends a crossed-over speaker-level signal to the front speakers.
See below for a more detailed e xplanation of this crossov er .
Rear Panel Connections – Detailed Explanation
Your new subwoofer is equipped with both speaker-level and linelevel inputs. Use the RCA/Phono type “INPUT” jacks when connecting your subwoofer to a pre-amp, signal processor, or line-level
crossover. The “SPEAKER LEVEL INPUT” jacks connect directly
to the speaker outputs of an integrated amplifier or receiver. Your
amplifier section will notice no additional loading effects when you
use these inputs because of their high impedance.
Note:
Do not use both the RCA/Phono “INPUT” connections and “SPEAKER
LEVEL INPUT” connections simultaneously.
Low-Pass Crossover
Both sets of inputs sum the left and right channels together and the
resulting signal is passed through an adjustable low-pass crossover
before being amplified. The crossover control allows you to adjust
the upper limit of the subwoofer’s frequency response from 40 to
120 Hz. The subwoofer’s response will begin rolling off abov e the
frequency you set this control to.
5
☞
CHT-10, CHT-8, CHT-12 specifications
Velodyne Acoustics has carved a niche in the audio industry with its high-performance subwoofers, especially within the CHT series. The CHT-12, CHT-10, and CHT-8 represent the pinnacle of home theater experience, delivering stunning bass performance and precision for audiophiles and casual listeners alike.
The CHT-12 stands out with its 12-inch driver that produces deep, powerful bass. It is engineered with a built-in digital amplifier that delivers 500 watts of peak power, ensuring robust sound delivery even in larger rooms. This model employs Velodyne’s patented Smart Speaker Technology, which optimizes audio performance and minimizes distortion. Moreover, the CHT-12 features a frequency response ranging from 25 to 120 Hz, providing a solid foundation for music and movie soundtracks alike.
The CHT-10, slightly smaller with a 10-inch driver, is designed for those who desire high-quality bass without overwhelming their living space. This model integrates similar technology as the CHT-12, boasting a powerful 350-watt peak amplifier and a refined frequency response from 30 to 120 Hz. The subwoofer adapts to various room acoustics with its adjustable phase control and variable low-pass filter, allowing users to achieve seamless integration with their existing audio systems.
Meanwhile, the CHT-8 is the compact version with an 8-inch driver, making it ideal for smaller rooms or apartments. Despite its size, it doesn’t compromise on performance, delivering deep, rich bass with 250 watts of peak power and a frequency response down to 35 Hz. The CHT-8’s compact design makes it easier to place in various environments without sacrificing sound quality.
All three models feature a durable enclosure constructed from MDF, designed to minimize vibration and enhance sound clarity. They also come equipped with advanced connectivity options, allowing for easy integration with most home audio systems. Velodyne’s CHT subwoofers are renowned for their reliability and sonic excellence, making them a valuable addition to any home theater setup.
In summary, Velodyne Acoustics’ CHT series, which includes the CHT-12, CHT-10, and CHT-8, exemplifies the brand’s dedication to acoustic innovation. Each model caters to different needs and environments while ensuring high-quality sound reproduction and user-friendly features. Whether for explosive movie scenes or deep musical passages, these subwoofers make a remarkable impact on the overall audio experience.
English
- Bedienungsanleitung Velodyne Acoustics CHT-10
- Velodyne Acoustics CHT-10 User Manual
- Manual Usuario Velodyne Acoustics CHT-10
- Mode d’emploi Velodyne Acoustics CHT-10
- Istruzioni Velodyne Acoustics CHT-10
- инструкция Velodyne Acoustics CHT-10
- Velodyne Acoustics CHT-10の取扱説明書
- Handleiding Velodyne Acoustics CHT-10
- Manual de uso Velodyne Acoustics CHT-10
Need user manual? We will help you to find it and save your time.
- 12 pages
- 0.29 mb
The Velodyne Acoustics CHT-10 and other products you use every day were certainly offered in the manual set. We know from our users’ experience that most of people do not really attach importance to these manuals. Many instructions, immediately after the purchase, go into the trash along with the box, which is a mistake. Get acquainted with the information concerning the manual for Velodyne Acoustics CHT-10, which will help you to avoid troubles in the future.
Important note — be sure to read the Velodyne Acoustics CHT-10 at least once
If you do not want to read brochures every time concerning a Velodyne Acoustics CHT-10 or other products, it is enough to read them once only — just after buying the device. You will then acquire basic knowledge to maintain Velodyne Acoustics CHT-10 in good operating condition to make it easily reach the intended life cycle. Then you can put away the manual on a shelf and use it again only in a situation where you’re not sure whether you perform maintenance of the product appropriately. Proper maintenance is a necessary part of your satisfaction from Velodyne Acoustics CHT-10.
Once a year, clean the closet where you keep all your devices manuals and throw out the ones that you don’t use. This will help you maintain order in your home base of manuals.
Summary of Contents for Velodyne Acoustics CHT-10
What does the Velodyne Acoustics CHT-10 manual include? Why is it worth reading?
- Warranty and details concerning the maintenance of the product
It is a good idea to attach a document of purchase of the device to this page of the manual. If something bad happens while using a Velodyne Acoustics CHT-10, you will have a set of documents that are required to obtain warranty repairs. It is in this part of the manual that you will also find information about the authorized service points of Velodyne Acoustics CHT-10 as well as how you can properly maintain the device by yourself so as not to lose the warranty for the product. - Assembly guidelines and Setup
Do not lose your nerves and time for trying to assembly the product and launch it on your own. Use the instructions of the Velodyne Acoustics CHT-10 manufacturer to run the product properly, without unnecessary risk of damage to the equipment. - Information concerning additional parts (included in the set and optional)
By looking through this part of the document, you will be able to verify whether your Velodyne Acoustics CHT-10 has been delivered to you with a full set of accessories. You will also be able to find out what optional parts or accessories to Velodyne Acoustics CHT-10 you will be able to find and buy to your device. - Troubleshooting
The most common problems that concern Velodyne Acoustics CHT-10 and how to solve them. This is a very useful part of the manual which will save you a lot of time related to finding a solution. 90% of the problems with a Velodyne Acoustics CHT-10 are common to many users. - Power requirements and energy class
Information concerning the amount of energy used as well as recommendations regarding the installation and supply for Velodyne Acoustics CHT-10. Read to optimally use the Velodyne Acoustics CHT-10 and not to consume more power than is necessary for the proper operation of the product. - Special functions of the Velodyne Acoustics CHT-10
Here you can learn how to customize the product Velodyne Acoustics CHT-10. You will learn what additional features can help you use the product Velodyne Acoustics CHT-10 in a comfortable way and what functions of your device are the best to perform specific tasks.
As you can see, in the manual you will find information that will really help you use your product. It is good to get acquainted with it to avoid disappointments resulting from a shorter exploitation time of the product Velodyne Acoustics CHT-10 than expected. However, if you cannot be convinced to collect manuals at your home, our website will provide you with help. You should find here the manuals for most of your devices, including Velodyne Acoustics CHT-10.
Comments (0)
Audio/Video Subwoofer
VX-10
Owner’s Manual
Velodyne Acoustics, Inc.
345 Digital Drive
Morgan Hill, CA 95037
408.465.2800 voice
408.779.9227 fax
408.779.9208 service fax
Web Site: www.velodyne.com
Technical e-mail: techhelp@velodyne.com
Service e-mail: service@velodyne.com
Product e-mail: help@velodyne.com
«It delivered room-shaking bass and dramatically demonstrated the
effectiveness of a single subwoofer placed to one side of the room.»
— Julian Hirsh
Stereo Review, January 1997
«In general, the Velodyne could play slightly louder, and often
cleaner, than the Sunfire.»
-D.B. Keele, Jr.
Audio/June 1998
«How do they get this kind of bass out of such a tiny box? Deep, tight,
tuneful and loud enough to rattle pictures on the wall—this is serious
subwoofing.»
-Robert Deutsch
Stereophile Guide to Home Theater/September 1998
Printed on recycled paper
P/N 63-VX10 Rev D 16MAY03