Видеорегистратор navitel r200 nv инструкция

NAVITEL R200 NV
Portable Video Recorder
User Manual

Introduction

Dear Customer!
Thank you for purchasing this NAVITEL® product.
NAVITEL R200 NV is a multifunctional high-definition DVR with many functions
and features that are described in this User Manual. Please read the manual
carefully before using the device and keep it for future reference.

Device layout

Specifications

Polish, Romanian, Russian, Slovak, Ukrainian

Note: the specifications may change due to upgrades.

Installation

| |
—|—|—

1. Put the microSD card into the DVR. Use a high-speed SD card (Class10 or above); capacity should be within 8-64 GB.
   • To avoid malfunctions of the DVR and/or SD-card, don’t insert and remove SD-
   card during DVR operation.
   • Before using a microSD card, please format it inside the DVR to avoid data
   errors. For formatting the SD-card in Menu mode select Format SD-card and
   confirm it.

2. Secure the device on the windshield with the holder.

3. Connect the car charger to the cigarette lighter socket.

4. Connect the car charger to the DVR (micro-USB).

5. Adjust the camera position.

6. Turn the power on; check whether the device is installed correctly. If the device is installed correctly, the indicator will glow red; the device will start up and begin recording  (indicated by flashing blue light).

Precautions

• Use only the original charger adapter. Using another adapter may negatively affect the device’s battery.
  Use accessories only approved by the manufacturer.

• Permissible ambient temperature in operating mode: 0 to +35 °С. Storage temperature: +5 to +45 °С. Relative humidity: 5% to 90% without condensation (25 °С).

• Put the device away from fire sources to avoid explosion or fire.

• Do not expose the device to physical impacts.

• Avoid contacting the device with sources of electromagnetic radiation.

• Keep the lens clean. Do not use chemicals or detergents to clean the product; always turn off the device before cleaning.

• Strictly follow the laws and regulatory acts of the region where the device is used. This device can not be used for illegal purposes.

• Do not disassemble or repair the device by yourself. In case of device failure, contact the service center.

Buttons

Press to turn the screen on / off.
| In Record mode (STBY), press to switch between Record, Capture, and Playback
modes.
In Record mode (REC), press to lock a file (protected file cannot be deleted
or overwritten).
In Menu press to choose the next menu section.
| Press to enter Menu mode.
In Menu press to choose the next menu section.
| In Record mode (STBY), press to start recording; press again to stop
recording.
In Capture mode, press to take a picture.
In Playback mode, press to select a file, or pause/resume video.
In Menu, press to select a menu item.
| In Record mode, press Down to turn the microphone on / off.
In Playback mode, press to select the previous/next file.
In Menu, press to select the previous/next menu item.
Reset| If the device is not responding, press to reset.

Note: the built-in battery is designed only for recording an emergency event
in parking mode and turning off the device correctly when the power is turned
off; for the full operation of the device in any mode, a constant power
connection is required.
NAVITEL s.r.o. hereby declares that the device NAVITEL R200 NV is compatible
with the European directive EMC 2014/30/EU.
The full text of Declaration of conformity is available at the following
internet address:
www.navitel.cz/en/declaration_of_conformity/r200nv

Device functions

Format SD-card| Formatting a microSD card in the DVR is necessary for the
correct operation of the device. Before using a microSD card or in case of a
data error, please format the microSD card. For formatting the SD-card in Menu
mode select Format SD-card and confirm it.
—|—
Record| Connect the device to an external power supply and it will start
recording automatically (indicated by the flashing blue light). Press the OK
button to stop recording. Press OK again to record another video. Each video
will be saved automatically.
Capture| In Record mode (STBY), press the Mode button to enter a Capture mode,
press the OK button to take a photo (it will be saved automatically).
Playback| In Record mode (STBY), press the Mode button twice to enter Playback
mode; press the Up and Down buttons to select a file; press the  OK button to
play a file. During playback, press OK to pause/unpause; press the Up and Down
buttons to fast forward / rewind.
Loop recording| This feature allows you to save a video as a set of files
given in the duration menu. If the memory card runs out of space, the
unprotected files will be overwritten in the order in which they were created.
Interval record| Recording parameters: 100 ms – recording at 10 frames per
second (fps), 200 ms – 5 fps recording, 500 ms – 2 fps recording. Only fast
playback of a recording is available (30 fps). Normal playback is not
possible.
Motion detection| When an object is moving the device will automatically start
recording. If the object does not move for more than 20 seconds, the recording
stops.
Record audio| Record video with or without sound.
Lock file| In Record mode (REC), press Mode to protect the current recording.
A key symbol will appear at the bottom of the screen. Press again to remove
protection. In Playback mode, select a file, press Menu, and select Protect,
then Lock Current or Lock All. Protected files cannot be deleted or
overwritten. Select Unlock Current / Unlock All to remove protection.
Stamp| This function adds a date stamp to the record.
G-sensor| If the vehicle is hit by something, the DVR will automatically lock
the current video.
Parking monitor| In the shutdown state, if the vibration is detected, the
device will turn on automatically and start recording. The file will be
protected (locked).
Battery| The red indicator lights up when the device is plugged into an
external power supply; as the battery is charging, the red light becomes
green.
LCD OFF| The device can automatically shut off the screen to reduce power
consumption; time intervals can be set in the LCD OFF menu.
USB-connection *| When connecting the device to a PC using a USB cable, two
connection options will appear:

1. Mass Storage: play, copy and delete files.
2. Record: standard mode.

• This function is available only in firmware version 20200505_AC5601 and higher.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>