View the manual for the Zalman i3 here, for free. This user manual comes under the category computer cases and has been rated by 1 people with an average of a 9. This manual is available in the following languages: English. Do you have a question about the Zalman i3?
Ask your question here
Zalman i3 specifications
Below you will find the product specifications and the manual specifications of the Zalman i3.
The Zalman i3 is a midi tower computer case made of plastic and steel. It features two 3.5″ bays and three 2.5″ bays, with no 5.25″ bays available. The case comes with a side window for viewing the internal components and white LED fans for illumination. It also includes cable management features to keep the interior organized and a reset button for convenience.
One standout feature of the Zalman i3 is its stylish design, with an acrylic side panel adding a modern touch to the overall look of the case. The white LED fans provide a cool illumination effect, adding a touch of flair to the build. The case does not come with transport wheels, so it may not be the most convenient option for those who need to move their setup frequently.
Overall, the Zalman i3 offers a good balance of functionality and aesthetics, making it a suitable choice for users looking for a mid-sized computer case with a sleek design.
Front fans installed
3x 120 mm
Supported HDD sizes
2.5, 3.5 «
General
| Brand | Zalman |
| Model | i3 | I3 |
| Product | computer case |
| EAN | 8809213769092 |
| Language | English |
| Filetype | User manual (PDF) |
Design
| Form factor | Midi Tower |
| Type | PC |
| Material | Plastic, Steel |
| Product colour | Black |
| Supported motherboard form factors | ATX, Micro ATX, Mini-ITX |
| Number of 3.5″ bays | 2 |
| Number of 5.25″ bays | 0 |
| Number of 2.5″ bays | 3 |
| Side window | Yes |
| Illumination | Yes |
| Illumination colour | White |
| Illumination location | Case fans |
| Cable management | Yes |
| Transport wheels | No |
| Reset button | Yes |
| On/off button | Yes |
| LED indicators | HDD, Power |
| Maximum CPU cooler height | 175 mm |
| Maximum graphics card length | 360 mm |
| Maximum PSU length | 180 mm |
Power supply
| Power supply included | No |
| Power supply location | Bottom |
Ports & interfaces
| USB 2.0 ports quantity | 2 |
| USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity | 1 |
| Audio input | Yes |
| Audio output | Yes |
Cooling
| Front fans installed | 3x 120 mm |
| Number of front fans supported (max) | 3 |
| Front fans diameters supported | 120 mm |
| Rear fans installed | 1x 120 mm |
| Number of rear fans supported (max) | 1 |
| Rear fans diameters supported | 120 mm |
| Number of top fans supported (max) | 2 |
| Top fans diameters supported | 120 mm |
| Liquid cooling capability | Yes |
| Front radiator sizes supported | 120,240 mm |
Storage
| Supported HDD sizes | 2.5, 3.5 « |
| SSD form factor | 2.5″ |
Weight & dimensions
| Width | 204 mm |
| Depth | 445 mm |
| Height | 479 mm |
| Weight | 4700 g |
show more
Frequently asked questions
Can’t find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Zalman i3 below.
What is the weight of the Zalman i3?
The Zalman i3 has a weight of 4700 g.
What is the height of the Zalman i3?
The Zalman i3 has a height of 479 mm.
What is the width of the Zalman i3?
The Zalman i3 has a width of 204 mm.
What is the depth of the Zalman i3?
The Zalman i3 has a depth of 445 mm.
Is the manual of the Zalman i3 available in English?
Yes, the manual of the Zalman i3 is available in English .
Is your question not listed? Ask your question here
Table of Contents
- ZALMAN i3 Series ATX Mid Tower Computer Case User Manual
- Precautions
- Specification
- Accessories Component
- 1/O Port
- 1. Separating the side panel
- 2. Mounting the main board
- 3. Mounting PCI-E (VGA) card
- 4. Mounting 2.5″ SSD and HDD
- 5. Mounting the 3.5″ and 2.5″ HDD
- 6. Cable Connection
- 7. Mounting the top fan
- 8. Mounting the fan and radiator in the front
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
ZALMAN i3 Series ATX Mid Tower Computer Case User Manual
i3 Series
To ensure safe and easy installation, please read the following precaution.
Product design and specifications may be revised to improve quality and
performance.
www.ZALMAN.COM
Precautions
-
Read this manual carefully before installing.
-
Check the product and components before installing. If you find any abnormality, contact the location where you purchased the product for a replacement or refund.
Wear gloves to prevent accidents when installing the product. -
Severe damage may occur when mounting the system, so do not apply excessive force.
-
Connecting the cable incorrectly may cause a fire due to a short circuit. Make sure to refer to the manual when connecting the cable.
-
Be careful not to block the ventilation hole of the product when using the system.
-
Avoid locations with direct sun ight, water, moisture, oil, and excessive dust. Store and use the product in a well-ventilated location.
-
Do not wipe the surface of the product using chemicals. (organic solvents such as alcohol or acetone)
-
Do not insert your hand or other object into the product during operation, as this may injure your hand or damage the object
-
Store and use the product out of children’s reach.
-
Our company assumes no responsibility for any problem that occurs due to the use of the product for purposes other than its designated purposes and/or the carelessness of the consumer.
-
The exterior design and specifications of the product are subject to change without prior notice to consumers for quality improvement.
Specification
Accessories Component
1/O Port
1. Separating the side panel
Side Panel Removal
2. Mounting the main board
As 6 stand-offs are mounted by default, insert an additional standoff
according to the type of main board by referring to the mounting position of
the main board, and mount the main board on the case.
3. Mounting PCI-E (VGA) card
Loosen the screw, separate the PCI cover, mount the graphic card, and fix it
using the screw.
4. Mounting 2.5″ SSD and HDD
2.5″ HDD and SSDs can be installed on the right side of case as shown in the
diagram below.
5. Mounting the 3.5″ and 2.5″ HDD
Separate the tool-free 2.5″ and 3.5″ combo HDD cage and assemble the HDD or
SSD. Mount the assembled HDD on the slot.
6. Cable Connection
7. Mounting the top fan
As shown in the picture, install the fan on the top of the case using bolts
8. Mounting the fan and radiator in the front
After Front Cover Removal and Mount the fan or the radiator on the mount hole
in the front as shown in the figure.
(For liquid-coders, only products with a hose length of 280 mm or more can be
installed)
Read More About This Manual & Download PDF:
References
- ANDPRO.RU — интернет магазин компьютерной и офисной техники с выгодными ценами и доставкой
- Manual-Hub.com – Free PDF manuals!
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>
Download This Manual (PDF format)
Download this manual >>
Корпус ATX Zalman i3, Midi-Tower, без БП, черный [i3 black]
- Форм-фактор: Midi-Tower, совместимые МП: ATX, mATX, mini-ITX
- Размеры корпуса ШхВхГ (внешние): 204 х 479 х 445 мм
- Установленные вентиляторы: спереди 3×120 мм, сзади 1х120 мм
- Блок питания: размещение: нижнее
- Внутренние отсеки: 3.5″х 2шт, 2.5″х 3шт
- Фронтальные разъемы: USB 2.0: 2шт, USB 3.0: 1шт, аудио
- Максимальные размеры: видеокарта 360 мм, длина БП 180 мм
- Особенности: прозрачная боковая панель, для геймеров
Появились вопросы о товаре?
- Форм-фактор: Midi-Tower, совместимые МП: ATX, mATX, mini-ITX
- Размеры корпуса ШхВхГ (внешние): 204 х 479 х 445 мм
- Установленные вентиляторы: спереди 3×120 мм, сзади 1х120 мм
- Блок питания: размещение: нижнее
- Внутренние отсеки: 3.5″х 2шт, 2.5″х 3шт
- Фронтальные разъемы: USB 2.0: 2шт, USB 3.0: 1шт, аудио
- Максимальные размеры: видеокарта 360 мм, длина БП 180 мм
- Особенности: прозрачная боковая панель, для геймеров
Появились вопросы о товаре?
I3
ATX Mid-Tower Computer Case
| Model | i3 |
|---|---|
| Case Form Factor | ATX Mid-Tower |
| Dimensions | 445 x 196 x 456(H)mm |
| Weight | 4.7kg |
| Materials | Plastic, Steel |
| Motherboard Support | ATX / mATX / Mini-ITX |
| Maximum VGA Length | 360mm |
| Maximum CPU Cooler Height | 156mm |
| Maximum PSU Length | 180mm |
| PCI Expansion Slots | 7 |
| Drive Bays | 2 x Combo (3.5″ or 2.5″), 3 x 2.5″ |
| Fan Support | Front: 3 x 120mm Top : 2 x 120mm Rear: 1 x 120mm |
| Fan(s) Included | Front : 3 x 120mm (with White LED effect) Rear : 1 x 120mm (with White LED effect) |
| Radiator Support | Front : 120mm / 240mm |
| I/O Ports | USB 3.0 x 1, USB 2.0 x 2, Fan Controller, Headphone jack, Microphone jack |
- · i3 Manual
Download
- DOWNLOAD
CNPS9X Optima
VS
CNPS9900 MAX