4.LED indicators, Wires, Auxiliary Input and Output
Notes:
1)Meaning of LED indicators:
LINK indicator(green): always(green) indicates TCP/IP
ACT indicator(yellow): flashing indicates data is in transmitting
TX indicator(yellow): flashing indicates it is sending data through
RX indicator(green): flashing indicates it is receiving data through
Auxiliary output indicator(green):always(green) indicates it is in use.
Lock indicator(green):always(green) indicates lock is open.
POWER indicator(red): always(red) indicates control panel power is on.
RUN indicator(green): flashing indicates the system works normally.
CARD indicator(yellow): flashing indicates card is punched on reader.
A Use 2-conducotor power cord
2)Recommended use of wires：
3)The auxiliary input may be connnected to infrared body detectors,
4)The auxiliary output may be connected to door bells,alarms,etc.
B Use 6-conductor wire between wiegand reader and control panel
C Use 4-conducotor lock power cord (RVV 4*0.75mm)
D Use 2-conducotor switch power cord（RVV 2*0.5mm)
communication is proper;
alam switches,etc.
through TCP/IP communication.
RS485 communication.
RS485 communication.
(RVVP 6*0.5mm) (Choose the appropriate cord for the interface
you connect, such as 6,8,10 cord.)
C3-200 Installation Instructions and Connection Guide
Version:1.2
Date: Jan. 2014
1.Cautions
1
2
3
Please note the following cautions. Mis-operation may lead to personal injury or
equipment failure:
1）Do not energize the system before installation is complete; never carry out
installation activities when the system is energized.
2）All peripheral devices must be grounded.
3）The conduits of wires under relay must be matched with metaled conduits, other
wires can use PVC conduits.
4）It is strongly recommended that the length of exposed part of any connection cable
should not be longer than 4 mm. Professional clamping tools may be used to avoid
unintentional contact of exposed wires to avoid short-circuit or communication failure.
5）It is recommended that card readers and buttons be installed at height of 1.4m-1.5m
above ground.
6）It is recommended to use the power supply for control panel, and external power
supply for each lock.
7）The appliance shall be installed and wired in accordance with national electrical
code and by qualified personnel only.
Description of normal working state:
Connect the system to the power supply. If the system works properly, the POWER
indicator (red) is lit constantly and the RUN indicator (green) flashes.
Valve regulated lead-acid battery:
Constant voltage charge voltage regulation
Cycle use : 14.5V~14.9V(25)
Initial current: less than 2.88A
Standby use: 13.6V~13.8V(25)
Capacity: 12V, 7.2Ah/20hr,
Battery Type: LC-RA127R2T1
Caution:
Do not charge in a gas tight container.
Do not short the battery terminals.
Do not incinerate
Flush with water at once if contact is made with
electrolyte (Acid)
Do not attempt to disassemble the battery.
Get through the thread hole Fixed case
Control panel
The charging
circuit board
Backup battery
Heat
dissipation
hole Thread hole Key hole
Wiring the Control Panel, The Charging
Circuit Board and Backup Battery
PO
W
E
R
2.Fixed and Installation
GND
IN
BUTTON2
GND
GND
+12V
+12V
WD1
WD1
WD0
WD0
READER3
GLED
GLED
BEEP
BEEP
GND
+12V
WD1
WD0
READER2
GLED
BEEP
AUX1
AUX2
EXT
BUTTON1
READER1
+12V
GND
WD1
WD0
GLED
BEEP
+12V
GND
485-
485+
GND
GND
IN
IN
IN
GND
TX
RX
ACT
LINK
POWER
CARD
RUN
LAN
1
1
TX
RX
V+
POWER
PC
NC
NC
COM
COM
NO
NO
COM
COM
NO
NO
NC
NC
LOCK1 LOCK2
GND
GND
SEN
SEN
V—
GND
485-
485+
AUXOUT1 AUXOUT2
LOCK
GND
+12V
1 2 3 4
ON
5 6 7 8
SD card
Advanced Access Control
READER4
GND
IN
BUTTON2
GND
GND
WD1
WD1
WD0
WD0
READER3
GLED
GLED
BEEP
BEEP
GND
WD1
WD0
READER2
GLED
BEEP
AUX1
AUX2
EXT
BUTTON1
READER1
GND
WD1
WD0
GLED
BEEP
GND
GND
GND
IN
IN
IN
GND
TX
RX
ACT
LINK
POWER
CARD
RUN
LAN
1
1
TX
RX
POWER
PC
NC
NC
COM
COM
NO
NO
COM
COM
NO
NO
NC
NC
LOCK1 LOCK2
GND
GND
SEN
SEN
GND
AUXOUT1 AUXOUT2
LOCK
GND
SD card
Advanced Access Control
READER4
V+
V-
+12V
LAN
485+
485-
+12V
+12V
+12V
+12V
485+
485-
+12V
ON
1
4
6
2
3
5
7
8
A
A
C
C
D
D
D
D
D
B
B
D
B
B
PC RS485 interface
Ethernet interface
Dip switch
Auxiliary output1
Auxiliary output2
Lock1
Lock2
Power of lock
Power of control panel
Auxiliary input1
Auxiliary input2
Extended
RS485 output
1# Door Button
1# Door
W iegand reader
1# Door
W iegand reader
2# Door Button
2# Door
W
iegand reader
2# Door
W
iegand reader
Note：
AUX Input (1-2) connect to the
infrared human body induction,
wireless exit button, windows
sensor with dry contact (no
voltage);
Note：
AUX Input (1-2) connect way is
same
Note：
Output Electrical
Parameters:
Rated Voltage：
12V(DC)
Rated Current:
0.5A
Note:
1、Door button (1-2) connect to Exit
button with dry contact.(no voltage);
2、Wiegand Reader (1-4) connect to
WG Reader;
Port (+12V)Output Electrical
Parameters:
Rated Voltage: 12V(DC)
Rated Current: 0.5A
Port (BEEP GLED) Output Ele ct rical
Parameters:
Rated Voltage: 5V(DC)
Raged Current: 0.5mA
Note:
AUX Output (1-2)
connect to alarm, door
bell and so on;
Port (NO,COM,NC)
Electrical Parameters:
MAX Voltage:
36V(DC)
MAX Current: 1.25A
Note:
AUX Output (1-2)
connect way is same
SD Card Interface;
Function: Backup Access Control Logs
Note：
Lock Power Input
Electrical Parameters:
Rated Voltage: 36V(DC)
Rated Current: 2A
Device Power Input
Electrical Parameters:
Rated Voltage: 12V(DC)
Rated Current: 2A
Note:
Lock(1-2):
Port (SEN)connect to door sensor single wit h
dry contact (no voltage);
Port (NO, COM, NC) Electrical Parameters:
MAX Voltage: 36V(DC)
MAX Current: 2A
Note:
When you select Wet mode, The power is Lock
power, Lock (1-2) total load don’t more than
Lock power Rated current (2A)
Note:
Lock (1-2) connect way is same
ZKTeco C3-200 Controller PDF User Guides and Manuals for Free Download: Found (3) Manuals for ZKTeco C3-200 Device Model (Installation, Instruction And Service Manual, Operation & User’s Manual)
The ZKTeco C3-200 is a sophisticated access control panel designed to offer unparalleled security and flexibility to both residential and commercial properties. Its robust features and user-friendly interface make it a standout choice for individuals and businesses looking to enhance their security measures. With a blend of advanced technology and reliability, the C3-200 serves as a central hub for managing access control devices, including RFID readers, biometric scanners, and electric locks.
One of the most impressive aspects of the ZKTeco C3-200 is its scalability. This access control system allows for the integration of multiple access control terminals, which is ideal for growing businesses or large facilities. Users can easily expand their security network without the need for extensive reconfiguration. Furthermore, the flexibility in installation options provides a great advantage; whether you need a wired or wireless setup, the C3-200 can accommodate various configurations.
The C3-200 is equipped with a number of exceptional features that enhance its functionality:
- Multi-Card Access: Supports multiple RFID card types, allowing for compatibility across various access cards and tags.
- Real-time Monitoring: Provides real-time monitoring and event logging, enabling users to track entries and exits effectively.
- User Management: Allows up to 30,000 users, with an option to set access levels based on roles, making it suitable for a diverse workforce.
- Secure Data Transfer: Uses secure communication protocols for data transfer, ensuring that sensitive information remains protected.
- Backup Options: Features a backup battery system, ensuring continued operation during power outages.
In terms of performance, the ZKTeco C3-200 excels. The system is built with reliability in mind, providing consistent access control and quick user response times. The user interface is intuitive, making it easy for both administrators and users to navigate through the software settings and access logs. Moreover, the installation process is straightforward, with comprehensive guidelines provided by ZKTeco, which expedites deployment significantly.
Security is paramount in any access control system, and the C3-200 does not disappoint. With features such as anti-passback and forced entry alarms, it ensures that unauthorized access is effectively mitigated. Additionally, the system’s ability to generate reports on access events enhances transparency and accountability, which is critical for compliance and security audits.
Customer support for the ZKTeco C3-200 also deserves mention. ZKTeco provides extensive documentation and responsive customer service, ensuring that users can resolve issues swiftly. Online forums and community support further enhance the overall user experience, allowing for shared tips and troubleshooting advice among users.
In conclusion, the ZKTeco C3-200 represents a robust solution for access control needs. Its combination of powerful features, scalability, and user-friendliness make it a top contender in the market. Whether you are managing a small office or a larger enterprise, the C3-200 promises to deliver security and peace of mind. It is undoubtedly a worthwhile investment for anyone looking to reinforce their security infrastructure.
FAQ: Types of Manuals and Their Contents
ZKTeco C3-200 Manuals come in various types, each serving a specific purpose to help users effectively operate and maintain their devices. Here are the common types of ZKTeco C3-200 User Guides and the information they typically include:
- User Manuals: Provide comprehensive instructions on how to use the device, including setup, features, and operation. They often include troubleshooting tips, safety information, and maintenance guidelines.
- Service Instructions: Designed for technicians and repair professionals, these manuals offer detailed information on diagnosing and repairing issues with the device. They include schematics, parts lists, and step-by-step repair procedures.
- Installation Guides: Focus on the installation process of the device, providing detailed instructions and diagrams for proper setup. They are essential for ensuring the device is installed correctly and safely.
- Maintenance Manuals: Provide guidance on routine maintenance tasks to keep the device in optimal condition. They cover cleaning procedures, part replacements, and regular servicing tips.
- Quick Start Guides: Offer a concise overview of the essential steps needed to get the device up and running quickly. They are ideal for users who need immediate assistance with basic setup and operation.
Each type of ZKTeco C3-200 instruction is designed to address specific needs, ensuring users have the necessary information to use, maintain, and repair their devices effectively.
Related Instructions for ZKTeco C3-200:
2
MD532
Manual ZKTeco MD532 User Manual (Manual ), @7G3MV4
17
67
17
4
F18
Installation manual ZKTeco IP Access Controllers Installation manual (File: zkteco-f18-installation-manual-2, 23/01/2025)
2
447
72
5
DL30B
Operation & user’s manual ZKTeco Locks Operation & user’s manual (File: zkteco-dl30b-operation-user-s-manual-26, Thu 02.2025)
26
580
134
7
InBio Pro Series
Installation manual InBio Pro Series (Control Panel ePDF User Guide, #5LP425)
36
945
218
9
SpeedFace V4LTI
7
697
161
10
BioPro SA30
13
1249
200
Gateway Devices by Other Brands:
|
Ruckus Wireless SmartCell Gateway 200 Command Line Interface Reference Manual Gateway #DIU9LU Ruckus Wireless™ 14 Oct 2024 | 583 |
|
|
UGMO UG1000 Series Quick Installation And Start-up Manual #6M766E: UG1000 Series Network Hardware Quick installation and start-up manual Quick Installation & Start Guide 25 Nov 2024 | 3 |
|
|
ADF Web HD67E23-A1 Operation & User’s Manual HD67E23-A1 Operation & user’s manual — 4G234V Industrial Electronic Devices 20 Oct 2024 | 28 |
|
|
wowvision proVEOS Quick Start Manual proVEOS (Projector Accessories ePDF Guide, #H1A3RS) Copyright © 2009. WOW Vision Pte Ltd. All Rights Reserved. 15 Feb 2025 | 13 |
Categories:
Control Unit
Microphone system
Time Clocks
Intercom System
Measuring Instruments
Temperature Controller
Parameter
| Number of Doors Controlled | 1 Door | 2 Door | 4 Door |
| Number of Readers Supported | 2 | 4 | 4 |
| Types of Readers Supported | 26-bit Wiegand, others upon request | 26-bit Wiegand, others upon request | 26-bit Wiegand, others upon request |
| Number of Inputs | 2 (Exit Device and Door Status) | 6 (2 Exit Device, 2 Door Status, 2 AUX) | 12 (4 Exit Device, 4 Door Status, 4 AUX) |
| Number of Outputs | 2 (1-From C Relay for Lock and 1-Form C Relay for Aux Output) | 4 (2-From C Relay for Lock and 2-Form C Relay for Aux Output) | 8 (4-Form C Relay for Lock and 4-Form C Relay for Aux Output) |
| Card Holders Capacity | 30,000 | 30,000 | 30,000 |
| Log Events Capacity | 100,000 | 100,000 | 100,000 |
| Weight | 7.4lbs (3.35kg) | 7.5lbs (3.4kg) | 7.8lbs (3.55kg) |
| Communication | TCP/IP, RS-485 and WiFi optional | TCP/IP, RS-485 and WiFi optional | TCP/IP, RS-485 and WiFi optional |
| Enclosure | Powder Coated Aluminium | Powder Coated Aluminium | Powder Coated Aluminium |
| Mounting | Wall Mount | Wall Mount | Wall Mount |
| Recommended Power Supply | 12V DC, 1.5A | 12V DC, 1.5A | 12V DC, 1.5A |
| Dimensions (Bundle Only) | 15in.×3.15in.×11in. | 15in.×3.15in.×11in. | 15in.×3.15in.×11in. |
| 380mm(L) X 80mm(W) X 280mm(H) | 380mm(L)×80mm(W)×280mm(H) | 380mm(L)×80mm(W)×280mm(H) | |
| Dimensions ( Board Only) | 6.3in.×4.17in. (160mm×106mm) | 6.3in.×4.17in. (160mm×106mm) | 8.58in.×4.17in. (218mm×106mm) |